Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

FS: DIY Green Kit! Host, Heatsink - Easy Assembly!






Re: FS: DIY Green Kit! Host, Heatsink - Easy Assem

Here's a couple of tips for this easy assembly: (and to answer your question about the battery)

* You will need a battery, and a 1.5mm Allen wrench for the set screw.
* You will need to cut the tail cap spring some. This is an easy thing to do. Then just re-shape the tip of the spring with some needle nose pliers. (see picture - first post)
* Battery orientation is case positive. (positive end towards tail cap)
* You can use either a 3.0 volt Lithium primary (CR123), or a 3.6 volt rechargeable battery. (RCR123) The 3.6 volt battery gives max power, but the 3.0 volt battery is recommended for a longer module life.
Jay
 
Re: FS: DIY Green Kit! Host, Heatsink - Easy Assem

Wait...
So why can't this build just use an 18650?
It is the same as using a an RCR123...
 
Re: FS: DIY Green Kit! Host, Heatsink - Easy Assem

It's because of the length of the module Spyder...

The overall length of the host is 4 3/4". That's the tail cap switch and all. The module is about 2 1/2" long from the spring to the front of the brass case.
Jay

P.S. If you find a host that will fit an 18650 with a green module, watch out for the module over heating! At least that's what I found once with these modules.
 
Re: FS: DIY Green Kit! Host, Heatsink - Easy Assem

jayrob said:
It's because of the length of the module Spyder...

The overall length of the host is 4 3/4". That's the tail cap switch and all. The module is about 2 1/2" long from the spring to the front of the brass case.
Jay

P.S. If you find a host that will fit an 18650 with a green module, watch out for the module over heating! At least that's what I found once with these modules.
Click to expand...
Oh...
I was thinking of that, but then i was like "Naw, that's a silly idea" ::).
 
Re: FS: DIY Green Kit! Host, Heatsink - Easy Assem

Since I just purchased this from you, and it uses these batteries, I don't find this post far offtopic...

Can I charge:
http://www.dealextreme.com/details.dx/sku.932
With:
http://www.dealextreme.com/details.dx/sku.4151 ?

I see posts saying that I can charge cr123's with it, but none about cr2's. Also I know almost nothing about batteries or charging them, I assume it should be an easy answer but I really don't know
 
Re: FS: DIY Green Kit! Host, Heatsink - Easy Assem

jayrob said:
The charger must be made for the specific rechargeable battery. Here is a CR2 charger:
http://www.dealextreme.com/details.dx/sku.2031

This DIY Green Kit is not for CR2 though. It is for CR123 or RCR123...
Jay
Click to expand...
Do you recommend any specific brand of CR123 or RCR123 batteries? The ones I found in Walgreens were EIGHT BUCKS, and that's for one battery!
 
Re: FS: DIY Green Kit! Host, Heatsink - Easy Assem

About the batteries...

The CR123's can be very expensive at the local store, but you can get them for very cheap from a U.S. based distributor... here:
http://www.batteryjunction.com/energizer-cr123a.html
That's where I get them 12 at a time. With a 10 year shelf life, you can't go wrong!

That same place sells the rechargeable batteries and charger too:
Charger: http://www.batteryjunction.com/tlunlichfor1.html
Batteries: http://www.batteryjunction.com/uf16340.html

Of course, you can find similar batteries and chargers at DX for even cheaper!

For these green modules, you can use either a 3.0 volt Lithium primary (CR123), or a 3.6 volt rechargeable battery. (RCR123) The 3.6 volt battery gives max power, but the 3.0 volt battery is recommended for a longer module life...
Jay
 
Re: FS: DIY Green Kit! Host, Heatsink - Easy Assem

Th0ughts, I want to let you know that your DIY Green Kit (and other item) will ship tomorrow! (Thursday)

Instructions included, but you can also use the first post in this thread as a tutorial! Please post back to let everybody know what you think of the kit! :)
Jay
 
Re: FS: DIY Green Kit! Host, Heatsink - Easy Assem

jayrob said:
Th0ughts, I want to let you know that your DIY Green Kit (and other item) will ship tomorrow! (Thursday)

Instructions included, but you can also use the first post in this thread as a tutorial! Please post back to let everybody know what you think of the kit! :)
Jay
Click to expand...
Awesome :D! I can't wait. I will be sure to post back on the build.
 
Re: FS: DIY Green Kit! Host, Heatsink - Easy Assem

great kit jayrob!  These are the best way I know of to get the high power green lasers that are easier to use!  :D :) ;D :D :) ;D ;D ;) :D :) ;D :D :) :) 8-)

btw the mini laser kit is also one I just love! :D :D :D

[highlight]Hooray for the jayrob kits![/highlight]
 
Re: FS: DIY Green Kit! Host, Heatsink - Easy Assem

I love your enthusiasm Glenn!

Very happy you like my kits... Especially coming from a veteran! ;)
Jay
 
Re: FS: DIY Green Kit! Host, Heatsink - Easy Assem

Here's to hoping it comes in tomorrow! I'll post about it as soon as I get it.
 
Re: FS: DIY Green Kit! Host, Heatsink - Easy Assem

Hey Jay!

My barrel came back today.

Thanks

Now we wait on Susie ;)

Peace,
dave
 
You must log in or register to reply here.


Back
Top