Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

FS: (Back in stock!) - Mosquito 635nm 1A - Single Cell Drivers






Re: FS: (they're here!) - Mosquito 635nm 1A - Single Cell Drivers

rhd,

i salute you for you are a good and honest guy :)
 
Re: FS: (they're here!) - Mosquito 635nm 1A - Single Cell Drivers

Can we see the underside of the driver rhd?
 
Re: FS: (they're here!) - Mosquito 635nm 1A - Single Cell Drivers

No!!!!

noooo!!!!!!!!

nooooooooooooooooooooooooooooo!!!!!!!!!!!!!!!!!!
 
Last edited:
Re: FS: (they're here!) - Mosquito 635nm 1A - Single Cell Drivers

Mohrenberg said:
I can't wait for people to see the pretty artwork on it, personally :crackup:
Click to expand...

:crackup: Are you going to post pictures when they arrive or let it be a surprise? Lol

Hey, rhd

I think those are nice drivers, and you should try to sell them somehow. They are pretty unique considering the only other amc7135 drivers you can get are on those crappy chinese 16mm round boards.

I knew I wasn't in a position to sell any drivers I would make, so I pawned it off on Mohrenberg :) Just something to think about :whistle:
 
Re: FS: (they're here!) - Mosquito 635nm 1A - Single Cell Drivers

Ooh tiny. Very nice, and not a bad price IMO.
 
Re: FS: (they're here!) - Mosquito 635nm 1A - Single Cell Drivers

Just got mine today and it is a really nice job there! :)

And just to verify, this is a linear driver correct?

Very stable with a quality Li-Ion battery. Low heat too... :gj:
 
Re: FS: (they're here!) - Mosquito 635nm 1A - Single Cell Drivers

It's linear, but the dropout voltage is only like 120mV.

So the 4.25v batteries still work for the 3v diodes.
 
Last edited:
Re: FS: (they're here!) - Mosquito 635nm 1A - Single Cell Drivers

jayrob said:
Just got mine today and it is a really nice job there! :)
Click to expand...

Thanks!

Yep, this is a linear driver. My goals were primarily single-cell driving, and no need to heatsink the driver. I think this design hits that target. I ran one connected to a dummy load, powered by my bench supply, for 12 hours (overnight and into the morning) just for fun - no issues. I think heat is almost an non-issue.

At any rate, just to update everyone. I've got the materials for a bunch more arriving this week. Once they're in, I'm going to take orders for a short little window (maybe 2 or 3 days) for anyone who has been interested but wasn't able to grab one of the initial batch. Then on a more permanent ongoing basis, I think I'm going to get some out to Clif at CL to add to his store.
 
Re: FS: (they're here!) - Mosquito 635nm 1A - Single Cell Drivers

Clif is a great guy, and it will be a lot easier for you to ship in bulk to him than to try and ship out all over the world and USA individual orders.


I've got a driver coming that uses a single 7135 that slides directly onto the diode and you just use a wire for the + input. It's another one of Ben's designs.
 
Re: FS: (they're here!) - Mosquito 635nm 1A - Single Cell Drivers

Mohrenberg said:
Clif is a great guy, and it will be a lot easier for you to ship in bulk to him than to try and ship out all over the world and USA individual orders.


I've got a driver coming that uses a single 7135 that slides directly onto the diode and you just use a wire for the + input. It's another one of Ben's designs.
Click to expand...

Lol, I did one of those also!

attachment.php


It uses 2x AMC7135s, for ~700mA of current. Wire leads for + and -, but then also can get the - from the case (for case negative builds). The whole thing just slips on the diode's leads, and gets soldered in place. These clean virgin diode leads are spoiling us :)
 

Attachments

  • Mosq Round.png
    Mosq Round.png
    54.1 KB · Views: 314
Re: FS: (they're here!) - Mosquito 635nm 1A - Single Cell Drivers

Cool! Mine isn't a circle though, it just sticks off to one side. Doesn't have any caps either. As long as batteries are the power source it shouldn't need them. I never even thought of just using a to-18 component on the board for connecting to the diode lol I just put the wire connections to the spacing shown on the datasheet. :crackup:

Your traces look a bit thin to me though. I would beef them up.

How do you do those 3d renders of a board?

Edit: Here is mine:
attachment.php
 

Attachments

  • 1x amc.JPG
    1x amc.JPG
    36.7 KB · Views: 888
Last edited:
Re: FS: (they're here!) - Mosquito 635nm 1A - Single Cell Drivers

benmwv said:
Cool! Mine isn't a circle though, it just sticks off to one side. Doesn't have any caps either. As long as batteries are the power source it shouldn't need them. I never even thought of just using a to-18 component on the board for connecting to the diode lol I just put the wire connections to the spacing shown on the datasheet. :crackup:

Your traces look a bit thin to me though. I would beef them up.

How do you do those 3d renders of a board?
Click to expand...

I have an android app that told me for 1A of current, 1oz copper, and a length of 10mm, I needed 12mil. The current is actually only 0.7A, and I actually went with 20mil traces, so I think I'm ok. I was lazy and sent you an older render though with 15mil traces. Also, there's a 3rd CAP on the later version. Datasheet wants a cathode-ground and anode-ground CAP. I also added a cathode-anode CAP. Not sure it was really needed, but they're cheap, and make me feel better :)

For the renders, grab Pov-Ray for windows. If you google "Eagle 3D Pov Ray" there are a bunch of walk-through. It's super-quick. Turn on anti-aliasing in Pov Ray for really good quality images.
 
Re: FS: (they're here!) - Mosquito 635nm 1A - Single Cell Drivers

I've got 100 of ben's on the way.
Still have to order the 7135 chips. Will prob have them sent in EMS.
 
Re: FS: (they're here!) - Mosquito 635nm 1A - Single Cell Drivers

Mohrenberg said:
I've got 100 of ben's on the way.
Still have to order the 7135 chips. Will prob have them sent in EMS.
Click to expand...

So Ben's will be 350ma?

I was going to say that you could use them for LOCs, but you probably can't on account of the case-negative nature of a LOC, right?
 
You must log in or register to reply here.





Back
Top