Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

FS: Aurora C6 Kits!

Status
Not open for further replies.
Hello.

I was thinking of buying one of those diode in a module (with glass lens) from rhd or was it dtr, can I just use one of those in the just add diode kit? What would it be outputting? Can I use other color lasers, such as a green laser module? I have a green laser module with a small driver soldered on just at the back of the module, can I put it in or won't it fit?

Thanks.
 





ginhev123 said:
Hello.

I was thinking of buying one of those diode in a module (with glass lens) from rhd or was it dtr, can I just use one of those in the just add diode kit? What would it be outputting?

Thanks.
Click to expand...
Yes, thats what I bought , the M140 diode from him w/ lens and module. You will need to remove the lower half of the module to make it fit.

I love this little host but the heat sink is a little loose. The top is tightend down but it will still spin when I focus. Is there a trick to fix this?

Edit: Tin foil worked great, thanks for the tip from Belgium. Lubed it w/ a little thermal compound too. Dont tell anyone I jimmy rigged it.
 
Last edited:
Put some aluminium paper from the kitchen in between. You won't see it when the top is screwed on.

c6heatsink.jpg
 
Last edited:
Yeah good idea Blord, You can also try putting a couple wraps of thermal tape on it, it'll improve your heatsinking as well. :)
 
Ah! what a great idea! When I get my other Aurora C6's ill be sure to do this! I think im going to do a full scale tutorial too so nobody will be unsure of what to do! :san:
 
M140 diode , w/ lens and module -- who did you buy it from, and will they work with the 1.25A kit...
 
They'll work fine with the 1.25A kit.

You can get the diode/module/lens from DTR or Clif at cajunlasers.com
 
How much mW Will i het put of à 1,25a kit?

I am new whit this, sow i want to order 2 of the 1.25a kits

Send me à pm whit the total costs, it needs to be shipped to Holland

Greetings
 
you can purchase it from the links in the first post. It should output around 1W depending on the diode
 
Hi, are you able to get any more 1.8A kits? Or you just have 1.25A left?
 
Just an FYI to builders of this. There isnt much room between the diode pins and the driver that is heat sinked on top of the pill. Shorten the wires and pins or they will hit.
Nice host, pocket size.
 
yeah room is tight. a round driver is in the works for these that just pops into the bottom of the pill.
 
I kust ordered à 1,25a kit. Do u fit the payment.
And pleas let me know when u gonna send it.

Greetings
 
Status
Not open for further replies.





Back
Top