Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

FS: 405-G-1 Glass Lens Mod - 31% Increase vs AixiZ!

Re: FS: 405-G-1 Glass Lens Mod-28% Increase vs Aix

Dark_Horse said:
Got my lenses today, thanks Jay!
[highlight]The work is very well done, (I am very picky)[/highlight]

...Nice Job Jay :)
DH
Click to expand...



Dark_Horse, thanks for posting back with your comments on the lens modification! :)

Very happy to read that you are overall happy with it...

I think I will do some experimenting with the aperture size to see if some of the splash can be eliminated. Just guessing, but I'll bet the aperture would have to be pretty small to block any of the splash.
Jay
 





Re: FS: 405-G-1 Glass Lens Mod-28% Increase vs Aix

gecko991, your 405-G-1 glass lens modification was sent today. (Saturday)

Let me know how you like it! :)
Jay
 
I am looking forward to its arrival, my blu-ray is right at 160mw now and that should bring it close to maybe 190-200 which is certainly a good thing.
 
You should get at least 26% increase!:) (vs AixiZ acrylic - back opened)

That means if you have 160mW's now, it will be over 200mW's.;)





The_Muffin_Man, your 405-G-1 glass lens (and other item) shipped today!

Hope you like it!
Jay
 
Last edited:
I'm getting 29% increase at 405 nM with all my Jayrob lenses. The spill can't be seen over a few feet so no problem with me.

Mike
 
I've got a 6x Kryton at 200mw with acrylic and I can hear it pleading with me to get one of these. I just can't afford one not having a job. I can only imagine the increase of 20-28% of 200mw....

Keep up the good work jay and you can bet your butt that sooner or later I'll have one of these.
 
Kenometer on hand, I've logged a 29.7% increase... :eek:

Unbelievable, big guy :cool:
 

Attachments

  • IMG_0418_websm.jpg
    IMG_0418_websm.jpg
    67.6 KB · Views: 187
  • IMG_0416_websm.jpg
    IMG_0416_websm.jpg
    68.8 KB · Views: 189
Unlike Milos' results, red didn't fare as well as I'd expected with only a 9.6% increase (vs. AixiZ glass; at $5 per lens, who's going to use acrylic with red anyways... :confused:)

Looks like the JayRob Meredith-in-AixiZ mod is not such a bad idea... :p
 

Attachments

  • IMG_0414_websm.jpg
    IMG_0414_websm.jpg
    75.2 KB · Views: 179
  • IMG_0421_websm.jpg
    IMG_0421_websm.jpg
    76.4 KB · Views: 184
For sure you will see a 20% increase vs AixiZ acrylic with back opened (about 15% or 16% vs AixiZ glass) for red using my 'Meredith glass fit for AixiZ' lens modification...

Nice pictures of the Kenometer! Looks like a very nice meter! :rolleyes:







Miloš, I sent your 405-G-1 glass lens mod today. Along with your Meredith glass fit for AixiZ lens modification.

If you don't mind, please post your results for the Meredith in my Meredith thread! :)
http://laserpointerforums.com/laser_pointer_forums_3/forum/showthread.php?t=22501
Jay
 
Last edited:
Flamingpyro, I sent your 405-G-1 glass lens mod today!

Hope you like it! :)
Jay
 
Hey jay I finally got to the post office and picked up your lens and all I can say is OMFG I can not believe the increase in power. With a fresh set of juice cells I fired up my Laserbee 1 and my power level jumped from 158-160mw to 215-217mw after 60 secs. I almost shit and tested two more sets of batteries only to find the same results. The dot quality is better being very small and burning ability has increased in a big way. An incredible lens which is worth every penny, thanks again. I now have 215mw of blu-ray powa.
 
I've finally got the money together - would you be OK with robjdixon sending about half of the money to you, and me sending the rest? He owes me, and it saves on PayPal fees if he sends to you rather than through me. If you'd like, I could add a little extra (the approx. $0.50 that PP add per transaction), to cover any additional fees you might end up paying.
 
gecko991, thanks for the good feedback! :) Glad you like it!










charliebruce, no problem! Sending PM...
Jay
 
Last edited:
You must log in or register to reply here.





Back
Top