FS: 18650 Build Kit! Easy Assembly! 445nm, Blu-ray, or Red...

[ossumguywill]

I'm currently using the microboost maxed out. Probably over an amp. IT IS SO AWESOME. With a plastic lens, totally unfocused, it will burn plastic and skin.

 

[jbtm]

My build:

Hot-Option set to 650mA
Copper heatsink (with set screw)
405nm G-1? lens

In all, good build for my 445nm laser! Love it! I already as a crude burning test just happen to saw an ant, and couldn't resist. I heard it sizzle

Just have to clean off the heatsink paste left on the copper Once I find the good spot for long range i will set my module back. There's plenty of room to slide it back thanks to the long heatsink.

 

[jayrob]

One of the nice features of this build, is that if you do want to adjust the module position inside the heatsink, it is a piece of cake!

Since the host has a final retaining ring that holds the heatsink in place, it's just a simple matter of taking off the retaining ring to have access to the heatsink and module set screw...

 

[ossumguywill]

Yep. I changed the input current at my friend's house with just my leatherman squirt. My only concern is that I don't have a proper adjuster wrench, and I might strip it. How much would it be for you to ship me a new set screw should I ever need one?

 

[jayrob]

I'd just send you one if you need one...

But just go to any hardware store and buy a 1.5mm Allen wrench for $1.50 and then you won't mess up the set screw!

With the proper wrench, you'll be able to get it tight as well...

 

[jbtm]

I got a kit for $11 at a hardware store that only exists here. over 50 different bits that are for hex-screwdrivers. It had the right size piece to fit your lock nut Also has the security ones with holes in the center

 

[ossumguywill]

I had a key ring with a ton of hex keys... unfortunately the smallest one (the perfect size) fell off lol. and @ jbtm I got my dad a 100 bit kit for like $9 at harbor freight for his birthday, I'm sure it had this bit but the kit is locked in storage somewhere.

 

[jayrob]

Exerd, just to let you know that I am sending your 18650 copper press fit heatsink today. (Friday)

Thanks!

 

[ossumguywill]

I just found a perfectly sized bit on the ground outside :wtf: That's going in my wallet... LOL there was almost enough room inside the host beneath the heatsink to keep it because of the funny way I installed the driver... that would have been convenient!

 

[jayrob]

scopeguy20, I sent your 18650 basic kits and other items today. (Monday)

davidgdg, sent your 18650 EzFocus adapter...

Thanks!

 

[boosted_4cyl]

do you have any of these with the press fit copper option available to ship? i have a 445 diode, aixiz glass, and ultrafire 18650 battery and charger on the way and id like to have this up and running by the 4th

 

[jayrob]

This is a hot kit these days...

The 10 hosts that I had received last week were gone in about 4 or 5 days. The two I just sent to Glenn, were on hold for him because he paid a while ago, and was just waiting on other stuff he ordered...

I have 20 more hosts on order, and they have shipped about 2 days ago. (10 of them did anyway, not sure about the other 10)

Anyway, I think about 6 or 7 are spoken for. So I'm taking orders for this build on a 'first pay, first serve' basis...

I normally can ship right away... I hate not being able to do this. But there has been a big demand for this kit and I have not been able to keep stock of the host.

I will promise you this, if you get in line for one, I will take good care of you. But you will have to be patient at this point...

 

[boosted_4cyl]

i couldnt possibly ask for more than that

 

[jayrob]

I've got another 18650 kit available too now...

It's a polished Stainless Steel host!

I've got 4 of those coming and 1 has been spoken for...

Here's the new kit:
http://laserpointerforums.com/f64/fs-stainless-steel-18650-kit-polished-perfect-445-a-52159.html

Here's a beam shot comparison! (with smoke)

Other than that, I do have one 4171 (newest style) host on hand. It takes an 18650. No copper option, but it has a massive heatsink, and is available with a 'Hot' option. See here:
http://laserpointerforums.com/f39/fs-mxdl-host-heatsink-combo-4171-3405-a-22512.html

 

[ossumguywill]

Oh god... MUST.. NOT... BUY...

 

[jayrob]

What? You mean my last 4171 (newest style) host?

It's rare... DX has discontinued it. It has a massive heatsink, and will be a good 18650 build for a 445...

Only $40 bucks for the basic host/heatsink combo...

Edit: Too late... SOLD