Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

For sale : 501B lasers with copper heatsink from $80

Re: For sale: NEW 1W-2W 445nm 501B lasers from $110

If you have a DMM, you can check the voltage to see if their good. Full charge is between 4 - 4.2v.
Another issue could be if they have a button top, or not.
 





Re: For sale: NEW 1W-2W 445nm 501B lasers from $110

Question for blord.....so i have two sets of 16340's and the ones i used originally are cheap ultrafire 1000mAh since my eagletac 750mAh were charging. when i put the eagletac's in the laser doesn't turn on at all, same exact size and everything but when i put the ultafires back in it works. my question is have you ever had certain batteries not power your laser on or did i just receive faulty batteries from my supplier? i dont have anything else to test the eagletac's in so slightly stumped.

battery: eagletac 16340 Li-ion 3.7V 750mAh IC protection

Your batteries may be too short. Try adding like 2 dimes at the tail cap after you put the batteries in, to provide better contact.
 
Re: For sale: NEW 1W-2W 445nm 501B lasers from $110

Well 45 minutes seems rather quick. My batteries take multiple hours to charge!

well the ultrafire's only took 15 minutes. i believe both battery sets i have came pre-charged, hence the short time to get to full charge. i just put them back on the charger and instantly show full charge. then put one ultrafire and one eagletac in the laser (i know mixing batteries isnt recommended but was only for a quick on/off test) and it powers up, not sure if output is the same or if its only pulling power from the ultrafire.

they are both button tops as well, weird!!!!

Your batteries may be too short. Try adding like 2 dimes at the tail cap after you put the batteries in, to provide better contact.

they both are identical in size, literally spot on the same +/- a hair :p
 
Last edited:
Re: For sale: NEW 1W-2W 445nm 501B lasers from $110

they both are identical in size, literally spot on the same +/- a hair :p

Yes, the difference between my AW's and my crappy Ultrafires is literally a hair, but without the 2 dimes, my AW's don't work. Just try it. :)
 
Re: For sale: NEW 1W-2W 445nm 501B lasers from $110

Just can't wait till arrives.
And negative to tailcap is this ?
____
Laser-- positive |____| negative ---- tailcap
 
Re: For sale: NEW 1W-2W 445nm 501B lasers from $110

Yes, the difference between my AW's and my crappy Ultrafires is literally a hair, but without the 2 dimes, my AW's don't work. Just try it. :)

tried it, i think ive come to the conclusion it just doesnt like eagletac's......guess ill just return the eagletac's (unless someone wants to buy them for another laser) and get some more ultrafires :undecided:

Just can't wait till arrives.
And negative to tailcap is this ?
____
Laser-- positive |____| negative ---- tailcap

yes tailcap negative


EDIT: although these eagletac's dont work i will buy some xtar 16340 protected, Nitecore RCR123A protected, and more ultrafires unprotected and see if those work incase protected just dont work. i dont think that is the case (not liking protected) but we will see soon. what is everyone else using in their laser?
 
Last edited:
Re: For sale: NEW 1W-2W 445nm 501B lasers from $110

Can't wait for my laser! Livinloud, please post beamshots or a vid or something so I can get my fix waiting hahaha
 
Re: For sale: NEW 1W-2W 445nm 501B lasers from $110

Can't wait for my laser! Livinloud, please post beamshots or a vid or something so I can get my fix waiting hahaha

oh don't worry ill be posting them tonight. its not dark enough out yet and i have class 8-10pm so once i get out ill post them. ill also post a few indoor beam shots. i have a nice idea for a shot that i do with my 532nm. fog the bathroom up completely and get a shot to show the difference between no fog and fog in the same beam
 
Re: For sale: NEW 1W-2W 445nm 501B lasers from $110

oh don't worry ill be posting them tonight. its not dark enough out yet and i have class 8-10pm so once i get out ill post them. ill also post a few indoor beam shots. i have a nice idea for a shot that i do with my 532nm. fog the bathroom up completely and get a shot to show the difference between no fog and fog in the same beam

Sweet! sounds awesome thanks dude!
 
Re: For sale: NEW 1W-2W 445nm 501B lasers from $110

Dang I really want my laser. Like abnormally badly. Been watching atleast 2 hours worth of laser videos every day.
 
Re: For sale: NEW 1W-2W 445nm 501B lasers from $110

Hey Blord,

I got recommended to your thread by pschlosser.

Wow these lasers look incredible! Do you have any left?
 
Re: For sale: NEW 1W-2W 445nm 501B lasers from $110

Quick beam shots (my camera freaks out with all the light output this thing throws) going to borrow my roommates Canon 7D and get some good shots soon. Ill play around with the settings to see if i can get a better photo but for now this will have to do.

These next two have no fog in the room but the bathroom is filled with fog hence why the whole room is glowing blue

63a82626-e721-4f25-8510-49c5dab79e7e_zps99b37d3f.jpg


0495d025-5796-4f83-ac88-ab49f313468f_zps153b69e0.jpg


These next two are pointed at the brick beam stop, with the glasses on all we see is a blue dot but man the pictures turned out super bright! THANK GOD for safety glasses!!!

2a72e56c-f75c-4cc9-8aa3-4acd16b2ab57_zps1c747623.jpg


687ee41c-e50d-4662-9e67-905d0a3fb3f5_zps9760f8e4.jpg


Going outside now to get some more pictures.....stay tuned :)

EDIT: haha just noticed in the first two, the wii sensor is glowing purple on the ends :) looks pretty sweet and hope it still works
 
Last edited:
Re: For sale: NEW 1W-2W 445nm 501B lasers from $110

Its because its always on and watches you sleep. :) Where at in Fl?
 





Back
Top