Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

"CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (REFUNDING.!!!!!!)

Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

If I new I would tell you guys. I dont think it was anything major. They Just mentioned it.
Ill be asking for an Update Tomorrow. So ill Update your guys then.

Remember If anyone wants a Refund Just PM me.:)
 





Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

Hey Angelos

I just saw you have me listed as refunded for the second groupbuy? Firstly I never asked to be refunded and secondly you havent actually made any payment to me. I guess you've made a mistake somewhere?

I should still be down for 3 diodes and 1 red lens for the mits 300/500 diodes...

Cheers :beer:
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

No worries.:oops:
The refund should have went under gif. Since Anthony took the diode from him.:)

Fixed.:)

Sorry about that. On my written notes here i have it correct though.
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

Ok great, sorry got a bit worried there! I thought my diode might have gone...:) :beer:
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

No worries. Just a mix up with the Names.



If anyone wants a Refund Just send me a Private message.!
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

Hey just out of curiosity, and in light of my recent problems with an AMC driver, whats your opinion about using the AMC based drivers for these diodes when they arrive? If I managed to kill a mits 500 (admittedly it may have been my fault, although no one myself included knows what I did wrong) do you think these diodes will be safe to use with these drivers? :beer:
 
Last edited:
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

grainde said:
Hey just out of curiosity, and in light of my recent problems with an AMC driver, whats your opinion about using the AMC based drivers for these diodes when they arrive? If I managed to kill a mits 500 (admittedly it may have been my fault, although no one myself included knows what I did wrong) do you think these diodes will be safe to use with these drivers? :beer:
Click to expand...

I think the AMC driver will be great for these diodes, if it has a chance of powering one. If they get to us, i will definetly use one for the modes and 700mA. Accordig to Lazereer, the Vin has to be around 3.9v.
The heatsink has to be insulated from the host.

But remember its very poor in components, it only has the chips and the pol diode. Adding a output cap is a good idea and could have saved your mits 500 :undecided: It sucks loosing diodes like this.
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

lazeerer said:
If I new I would tell you guys. I dont think it was anything major. They Just mentioned it.
Ill be asking for an Update Tomorrow. So ill Update your guys then.

Remember If anyone wants a Refund Just PM me.:)
Click to expand...

I don't think they were being honest about that.
"Dragon boat" is between Jun. 22 - 24 this year 2012

The next one, "Mid-Autumn Day", starts on Sep. 30th.

Lazeerer you gave them a due date right? Maybe they're just stalling for more time in order to keep the sale while looking for these diodes :thinking:
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

If my knowlege is correct, I believe it was Chinese valentines day last week
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

We aren't going to get the diodes are we? :(
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

^^^PM Incoming to discuss refund...


Do you understand the fact that iam not making YOU or anyone wait.?

You are completely frustrating me because from your past several posts you do not understand that it is your choose to wait. NOT MINE. Iam not making you or anyone wait.

I said this weeks ago. The GB is over. I said iam leaving my 30pc order in just encase for myself and then others started to say they want to wait too When i was going to refund everyone.

I was being Nice enough and extremely patient with everyone and those that want to wait rather then refund everyone and end it completly. I would rather refund everyone and only keep those that i know understand but i dint and left it open to everyone.

It seems you completely missed me saying on the past couple pages "If you want a refund PM me"

If there is anyone else that is becoming impatient or assuming anything PM me and I will Refund you right away. Its that simple...

Remember it is your own choose to wait NOT MINE.!

In fact Ive been refund the few that asked for a refund out my pocket so it doesn't hurt the rest of the people waiting by maybe the supplier getting discouraged if i request a parcel refund.


DO you honestly think i dont want the diodes just as bad.:undecided: Do you think iam just sitting here twirling my thumbs... DO you know how frustrating it is to not be able to come through and make everyone happy with the diode. On top of all that then you have someone making remarks and questioning.

All people have to do is sit there and wait while iam doing all the work in trying to get the diodes. I have No problem doing that as I know that is what a GB is and i signed up for it and iam happy to do it so dont get that confused. However I dont need someone Breathing down my back when its there own choose to wait. Its added frustration that i dont need.

Think about it.

Again for 1 more final time. If you want a refund just PM ME. Iam Not making you wait its your choose. If your getting Impatient or whatever just PM me. You can end your own horror of waiting with just 1 PM to me. You get your refund and you can go spend it on a cup cake or whatever you like.:beer:

I mean seriously guys Understand my frustration here. There is Nothing more i can do other then fly out there and meet with them which is not going to happen. Other then that iam doing the best i can and have bent over backwrods trying to get these diodes. I want them even more now that there so much harder to get.


Its your own choose to wait. Remember.!!!!<<<<<




For those that are Patiently waiting those past 2 supplier sent sample over to my supplier and iam just waiting to hear the news. Ill update once i hear from them. Thanks for being patient and Understand...Its great-fully appreciated.
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

Relax. Calm down.
It is still a group buy and you just can't freakout like this. It's been 12 days since hearing from you. No one that I can see is yelling at you.
 
Last edited:
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

Soldier on lazeerer!

And visible green. We dont need a nagging member putting pressure on our main man.

Either pull out or shut up.
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

Fiddy said:
Soldier on lazeerer!

And visible green. We dont need a nagging member putting pressure on our main man.

Either pull out or shut up.
Click to expand...

Stay out of it. I didn't put pressure on anyone.
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

I'm still kool on this ☺
HMike
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

Sorry I haven't been here for a bit! I am also cool on the wait too guys:beer:!!
 
You must log in or register to reply here.





Back
Top