Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

A New Jetlasers GB on Stocked * Metered PL-E Pro, Equality series and Ti B Lasers

gismo

0
Joined
Jan 8, 2013
Messages
758
Points
43
The battery I'm using in my Ti B 180mW is the one here:

1 NEW Aweite IMR LI ION 17670 3 7V Battery 1400mAh E Cigs ETC | eBay

10444176615_be4bd65179_c.jpg


10444097084_0d253a4659_c.jpg


:)
 





Joined
Apr 2, 2009
Messages
10,662
Points
113
SOLD SOLD SOLD


FS New with full warranty-
EQ 350 mW 532nm
Silver grey host- focusable
IR filtered
Reverse Polarity.Portected.
Single 18650
with budget charger (use at your own risk)
dot at 11.45 feet-1/4th inch.-137.5 inches
from spec sheet*********

Constructed from aircraft grade aluminum 6061 to ensure durability in any circumstance. the Equality series lasers are meant to be reliable and work in poor weather conditions.


For practical purposes, Equality series has a replaceable yet chargeable lithium 18650 battery and can provide up to one hour of continues light. The length of the unit is 20m and it weighs about 355 grams.


The best working temperature for high power DPSS 532nm green lasers is 25 °C - 30 °C and the output power will fluctuate or warm up as a result of the temperature sensitivity of the laser crystals.


Equality series also sports a pointed edge which can be used for targeting an assailant’s pressure points and delivering precise strikes, but also doubles as a glass breaker in emergencies.


Model
Equality series 532nm Lasers, Dpss green

Wavelength
532nm Green

Switch type
Mechanical

Dimensions
40mm( Diameter) x200mm( Length )

Net Weight
280 Gram Without Battery

Power Supply
1 x 18650 Lithium Battery

Working Voltage
4.2V

Diode Life Time
>6000 Hours

Beam Divergence
<2.0mRad

Beam Diameter At aperture
2mm; adjustable to bigger

Transverse Mode
Near Tem00

Operating Mode
CW

Working Temperature
15 to 35 Degree C
Warranty----- One year

linkage
532nm Equality series Green Lasers - Jetlasers.org, Online Shop for Jetlasers Products.




***********

SMRP (at jetlasers.org $300 for the 400mW and $250 for the 300 mW)

My forum price $ 235. Plus 20$ insured and tracked shipping- FS only to CONUS buyers.
USPS MOs- Bank checks or personal checks--NO POO PAL--
came be bundled with the following
laser and 15X15 Diffraction grating shipping ~$30

Pair 18650s $12
Nite Core i2 intellegent smart charger $ 15 ( no free charger)
Black NOS Pelican case $30 w/ inserts( not my best work-first time using this type of foam)
8 free laser warning stickers
Extra diff grates @$5 each
QS FB3 $498 (additional shipping cost may be needed)

Heads-up(afaik)

soon JL will offer a fixed focus EQ version that will be able to use a JL Beam Expander.
I am told this may be down with a removable attach crown- so i am assuming the attachment to the laser witll be threaded.... no idea as to a date for this version... FYI

NOTE Buyer by making purchase agrees to and confirms that they have read the conditions of the warranty.
weather proof does NOT mean waterproof-
3min run time MAY be too long when ambient temp is high- The rest cycle must be used with consideration also to the ambient temp. No laser can naturally cool below ambient temp. DPSS Lasers are effected by temp. more than diode lasers.
too high or too low can cause instability.. Use accordingly.

Warranty link and more required reading.
Warranty - Jetlasers.org, Online Shop for Jetlasers Products.
Terms & Conditions - Jetlasers.org, Online Shop for Jetlasers Products.
Refund & Return Policy - Jetlasers.org, Online Shop for Jetlasers Products.
 

Attachments

  • silver-mini-equality-series-1w-blue-laser-portable-jetlasers-9.jpg
    silver-mini-equality-series-1w-blue-laser-portable-jetlasers-9.jpg
    13.7 KB · Views: 169
  • EQ 350mW 532 11 2 2013 beam and dot 001.jpg
    EQ 350mW 532 11 2 2013 beam and dot 001.jpg
    111.5 KB · Views: 132
  • EQ 350mW 532 11 2 2013 beam and dot 004.jpg
    EQ 350mW 532 11 2 2013 beam and dot 004.jpg
    112.6 KB · Views: 137
  • EQ 350mW 532 11 2 2013 beam and dot 006.jpg
    EQ 350mW 532 11 2 2013 beam and dot 006.jpg
    105.9 KB · Views: 110
  • EQ 350mW 532 11 2 2013 beam and dot 020.jpg
    EQ 350mW 532 11 2 2013 beam and dot 020.jpg
    108.1 KB · Views: 129
  • EQ 350mW 532 11 2 2013 beam and dot 025.jpg
    EQ 350mW 532 11 2 2013 beam and dot 025.jpg
    101.8 KB · Views: 105
  • EQ 350mW 532 11 2 2013 beam and dot 027.jpg
    EQ 350mW 532 11 2 2013 beam and dot 027.jpg
    106.4 KB · Views: 122
Last edited:
Joined
Apr 2, 2009
Messages
10,662
Points
113
MOAR pics--

This may be sold-- pending payment
feel free to call dibbs if they buyer changes his mind..
This laser has less than 20 mintotal run time- the baem pics above show the r thin beam in one- the other was not done with tripod so its looks fatter that it e=-really is.
<y measurements-
beam at apeture <1/4th inch
On board in above pic at 11.45 feet the dot size was 1/4th inch.
barely visible artifacts seen in most DPSS lasers.
beam was well centered
The deluxe case is Genuine Pelican NOS- and there is some extra room as the laser is resting on ~1 inch of foam.
I was able to store 6 TI-Bs in one with two layers.
I have more pics of these cases in another thread- 3 in stock.
 

Attachments

  • equality-series-handheld-jetlasers-5.jpg
    equality-series-handheld-jetlasers-5.jpg
    25.5 KB · Views: 121
  • equality-series-handheld-jetlasers-6.jpg
    equality-series-handheld-jetlasers-6.jpg
    24.8 KB · Views: 142
  • equality-series-handheld-jetlasers-7.jpg
    equality-series-handheld-jetlasers-7.jpg
    21.5 KB · Views: 140
  • equality-series-handheld-jetlasers-8.jpg
    equality-series-handheld-jetlasers-8.jpg
    19.9 KB · Views: 128
  • EQ 350mW 532 11 2 2013 beam and dot 014.jpg
    EQ 350mW 532 11 2 2013 beam and dot 014.jpg
    106.2 KB · Views: 166
  • EQ 350mW 532 11 2 2013 beam and dot 022.jpg
    EQ 350mW 532 11 2 2013 beam and dot 022.jpg
    105.1 KB · Views: 173
Joined
Apr 2, 2009
Messages
10,662
Points
113
Sent you an email today, let's see how it goes!

Gray handles all the sales to EUR-
I only do CONUS,,
I can tell you that i am impressed with these new EQs.
very well made-
from Gray your shipping should be $29.95 usd
he can add glasses if you need them and the holster is a good deal to get at the same time; nylon well made goes on your belt- its too big for a pocket.
Buying from JL with Western Union of bank transfer is perfectly safe.
And there is no other sales rep from China that treats buyer better.
and he is also a member in-here in every sense.
He has helped MANY members and is very deseving of our patronage.

Len
:beer:
 
Joined
Apr 2, 2009
Messages
10,662
Points
113
See what there is at jetlasers/org in PL-E Pro and EQ series- then look for it in both the JL GB threads started by Gray. if it is in both places I am betting its already on sale- if not there send gray a PM and request some quotes or prices of whats on-hand. IIRC you can use the coupon to get $15 off= I have mainly stuck with visible radiation. good luck and be careful hak
 
Joined
Jun 7, 2012
Messages
1,683
Points
63
Well I did already check the sites and this thread where no 808nm is offered. I'm leaning towards building myself one but if he's willing to provide good customer service and a good deal I might be interested.
 
Joined
Aug 5, 2010
Messages
356
Points
28
Joined
Apr 2, 2009
Messages
10,662
Points
113
hows that for a quick reply??
thanks Gray..I knew it was someplace.. hk


FYI @TheDuke.
see if that 15$ off coupon is still good.
 
Last edited:
Joined
Jun 7, 2012
Messages
1,683
Points
63
Yes I have already seen them listed there. My interest in power level depends on the price. If all I can hope for is $15 off the website price I'm not interested.
 

DB8088

0
Joined
Aug 4, 2013
Messages
112
Points
18
I recently received the Expander for the PL-E Pro and it's freaking FANTASTIC! It looks great, it feels great and it focuses with a beautiful smoothness...sitting in my living room, 20 ft. away, I burned a hole through my curtain, lol. Probably the best extension to my lasers that I own! Much appreciation to Gray, a man of honor and integrity.
 

cmak

0
Joined
Jan 12, 2010
Messages
716
Points
28
I'd like either Ti B #2 or #7, I'm deciding and will have an answer soon, if it's okay to put me on hold for both. Last time I checked, one of the graphs was mismatched (#2?).
Are any of the Equality lasers available in the Mini Dazer (dazzler) configuration? Or are the Equality and Dazers indentical? If I go with the Dazer, I won't be getting the Ti B.
Thanks!
 
Last edited:
Joined
Aug 5, 2010
Messages
356
Points
28
I'd like either Ti B #2 or #7, I'm deciding and will have an answer soon, if it's okay to put me on hold for both. Last time I checked, one of the graphs was mismatched (#2?).
Are any of the Equality lasers available in the Mini Dazer (dazzler) configuration? Or are the Equality and Dazers indentical? If I go with the Dazer, I won't be getting the Ti B.
Thanks!

Hey cmad, sorry the Ti Bs on the list ran out weeks ago but we have some stocked Ti B 532nm green lasers outputting between 100mW and 150mW.

The Equality series portable greenie is not identical with the dazer version while the dazer version has no focus and the beam is more diverged for safety's sake. Pls pm me when you decide. Thanks.
 




Top