Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

583.8nm and 589nm, the golden brothers






CurtisOliver

0
LPF Site Supporter
Joined
Jun 12, 2015
Messages
7,594
Points
113
You need a Nd:YVO4 crystal coated for both 1064nm and 1342nm. Then pump with a 808 like normal.
 
  • Like
Reactions: GSS
Joined
Jan 29, 2014
Messages
12,031
Points
113
Oh that would be great, very straight forward that way, except for oven.
 

CurtisOliver

0
LPF Site Supporter
Joined
Jun 12, 2015
Messages
7,594
Points
113
It should be straight forward. Will just take careful phase matching, and expect a low efficiency. The crystal is labelled 594.3 nm, but 1064+1319 is actually 593.5 nm. The crystal coatings won't be too specific, so should have no problems getting output once orientated correctly.
 

CurtisOliver

0
LPF Site Supporter
Joined
Jun 12, 2015
Messages
7,594
Points
113
No, 1319 is for the 589's. And would then involve a Nd:YAG rather than Nd:YVO4. And the coatings on the crystals probably wouldn't allow that wide a range of IR.
 
Last edited:
Joined
Jan 29, 2014
Messages
12,031
Points
113
Found this on ebay, now to figure out a way to put an oven in it for my yellow coherent 3x3x5mm KTP and room for a YVO4 crystal. I found a 4 watt wavelength locked 808nm C-Mount laser diode cheap, so I won't have to mess around with a TEC for the diode. This already has an unknown KTP in it where the white tape is.

Screen%20Shot%202016-12-15%20at%2011.07.45%20PM.png


Backup plan is to just use this for a 532nm green KTP, if it doesn't work out for the yellow crystal.
 
Last edited:
Joined
Dec 16, 2016
Messages
17
Points
3
Hello everyone, I wanted to see if yall could help me with selling me a blue 2w laser or know someone who can build me one. Plz and thank you!
 

CurtisOliver

0
LPF Site Supporter
Joined
Jun 12, 2015
Messages
7,594
Points
113
Hello everyone, I wanted to see if yall could help me with selling me a blue 2w laser or know someone who can build me one. Plz and thank you!

You may want to introduce yourself in the welcome section first, before you post a off-topic request on a random thread.
 

CurtisOliver

0
LPF Site Supporter
Joined
Jun 12, 2015
Messages
7,594
Points
113
I've never seen a something so elaborate, but I like it. :D
You should be able to use it for your yellow. But it may be worth using it for a high quality green instead.
 
Joined
Jan 29, 2014
Messages
12,031
Points
113
For green, I have two of the 4 watt rated wavelength locked 808nm C-Mount diodes I could PBS combine to drive a crystal harder and produce a lot of green, don't know how stable it will be in this kind of frame unless I find a way to control the temperature of the crystal holder, or perhaps the whole thing inside a temperature controlled aluminum tube. I think this is one of the most awesome things I've seen for a home built DPSS project, well, sort of home built, most of the work is done if using this.
 




Top