445nm blu 3w+

[nguyenchithichs4]

Hello!!
This is my product.
Amazing when completed.

Some pictures when done

The engine radiator and wires

Pretty big as baseball bats hehe

Pin life 26650 3.2V 3.5AH

Use ic LM335 and LM35 temperature sensor to the laser temperature operation to the desired level as the engine cooling air operations (air intake blowing through the radiator) if temperatures rise too long it can vibration up to high temperatures. when the laser is not working anymore, the engine remains active until the temperature drops low, the engine will stop working.
End. thank you...

 

[jander6442]

That one schweet build man can you tells us more about the temperature set and where you put the sensor?

 

[Blord]

The laser looks very good. I like the vandal button on the side. Keep up the good work !

 

[nguyenchithichs4]

That one schweet build man can you tells us more about the temperature set and where you put the sensor?

I set up a temperature sensor with 2 variable resistor. The first variable resistor to engine cooling Clause 35 ° C and the second variable resistor vibration alert for high temperatures in Clause 50 ° C. I put the sensor is placed behind the sensor diode to operate the best wings. inside the sensor works very well, and safe for the diode operation.: Yh:: Yh:

 

[nguyenchithichs4]

Because the active diode emits heat very fast. Should I have done more engine heat dissipation and very good when the temperature drops very quickly.

 

[Down with Umbrella]

Beautiful! Quite the host. I have considered using that same switch but they just take up so much room. Clearly this isn't an issue here. Most impressive lathe work too.
+1

 

[DTR]

Awesome. That is one of the best looking hosts I have seen in a while.:beer:

 

[ujelytek]

Wow im speechless this is awesome

 

[crazyspaz]

Really impressive. Wow!

Is that host custom made by you? It looks incredible!

 

[nguyenchithichs4]

Really impressive. Wow!

Is that host custom made by you? It looks incredible!

This is a variable resistor is placed quite cramped place.

Thanks you!!!:yh:

 

[petters]

The build is overall amazing, but that host is really a piece of work. Sweet work

 

[Cel]

Awesome host! And the power button is very nice too :beer:

 

[chipdouglas]

This is one of those times I'm really glad I clicked on a new build link...


One question though.. You wrote "my product", I'd you mean "my project"? Or tis this a kit you will be selling?

 

[IWIRE]

Amazing job. Very innovative. Beautiful workmanship. Thank you for sharing it !
REP +1 :beer:

 

[busman2]

That is a nice looking host as well as added practical functions. Welcome to the Forum, you may be new here but obviously not new to the hobby! +rep

 

[Moe Ron]

Greetings,

Nicely done !
That is by far one of the best hosts I have seen. +1


cheers,
Moe