Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers
Buy Site Supporter Role (remove some ads) | LPF Donations
Links below open in new window
FrozenGate by Avery
1W 445nm Lasers starting at 180$ Shipped!
- Thread starter kiyoukan
- Start date
Krogith
0
- Joined
- Dec 12, 2010
- Messages
- 1,195
- Points
- 0
This was already suggested...
Can someone who has bought from him before Contact him? You have his address? Do you have a Phone # anyone? We should try and contact him, someone has to have more of his info, can that person please try and contact him?
This would really help out.
EDIT: Do not post his info just please try and contact him.
Yes, I know. But even more so now, so I found the need to restate it.
Krogith
0
- Joined
- Dec 12, 2010
- Messages
- 1,195
- Points
- 0
I would of if I were you as well. I really hope someone who has in the past delt with him and has his contact information to please try and do what they can to contact/Call/Mail him or something. A lot of people would appreciate it.
- Joined
- Jul 17, 2010
- Messages
- 2,160
- Points
- 0
If He can't complete the Lasers maybe He could send the hosts and parts to someone willing to assemble and ship them to the buyers.
My $0.02
My $0.02
- Joined
- Oct 26, 2007
- Messages
- 5,438
- Points
- 83
I already provided his email, and short of writing him a letter using his return address, that's about the best way to contact him.
csshih
0
- Joined
- Sep 27, 2010
- Messages
- 426
- Points
- 43
hey all. I talked to kiyoukan jan 6 -
he is currently having problems regarding his place of residence and I'll leave it to him to explain when he gets setup again.
at the time he said he hoped to get setup again in a week, (moving his lathe would be a PITA?) but I haven't seen him online since.
he is currently having problems regarding his place of residence and I'll leave it to him to explain when he gets setup again.
at the time he said he hoped to get setup again in a week, (moving his lathe would be a PITA?) but I haven't seen him online since.
- Joined
- Aug 30, 2008
- Messages
- 6,891
- Points
- 83
This happens quite often.
http://laserpointerforums.com/f39/buying-selling-through-forums-40994.html
If you'd like to sell some of your hosts, let me know.
http://laserpointerforums.com/f39/buying-selling-through-forums-40994.html
If you'd like to sell some of your hosts, let me know.
Last edited:
kiyoukan
0
- Joined
- Oct 24, 2009
- Messages
- 2,555
- Points
- 48
Takes deep breath,
Hello,
It has been WAY to long.
I dont even know where to start.
I am having a lot of problems getting my personal things out of my old house.
by escort i was only allowed to take things such as cloths and very personal objects.
But all other things i was to leave until they could be proven to be mine.
How this all began was over confronting someone i thought was a friend over a drinking problem, long story short i seemed to hit a very large family heritage nerve.
And in an attempt to get my stuff back i picked the lock of the house and proceeded to pack my things up but before i got anything out of the house i was confronted by the police. not my best moment.
Some good news, My so called friend is now out of a job and is having a hard time making the payments, and with all my stuff occupying his house he cant get anyone to move in.
So this saturday we are meeting, by then i hope to be able to take my things or in the off chance it goes that well i might even be back living there.
i have been able to get online but having the stress from this whole thing was making me vomit at times.
So i decided to take up more hours at work and just deal with the things that i could deal with and in not one of my best minds i made the decision that if i cant do anything about it, i was back seating it until i could.
For that i am sorry, i don't mean to elude or ignore responsibility and the obligations i had.
I made a choice and granted it was not a good one for those who were on the other end. I feel terrible and will be making them right even if you have your money back i will still be sending out the product for the fact that i said i would.
So nothing is lost or abandoned if i owed you anything and i dont pm in the next couple of days, please pm me with the details of our transactions and i will make them right even if it means eating the cost of it.
I would not be one for moving back in, but seeing as my other option is a small apartment with 3 other people it would be a bad choice.
As i would not be able to run my 9x20x lathe or just have any room for a work bench.
So if i am unable to move back in i do have lots of hosts and other items that i will just sell off.
So if you might be interested in any of the items used to build them let me know.
As well as i had a project for a new LPM,
i have built 1 prototype but never had the time or the programmer to make it work,
it uses a usb PIC if you would be interested in a usb LPM that could be made from end to end for under 50$ material (maybe as low as 30$ in 50 order bulk)
The only work would be to program the microchip, the software would be with one that is already made.
The board is small and fit behind a 2x16x char lcd (it might have been a 2x20 lcd) and runs of 9 volts.
This is something i wanted to see work but i think even after i get back to normal i will be to busy to make it right.
But i have done lots of work in its development.
Also note it uses 90% smd parts so to make it you will need a re-flow oven and/or hot air its also double sided. with only few parts on the back side.
It would have a range of 1-5W possible depends on the coating at what point it burns off.
If you would be interested in just coding it we can work that out.
If you have any other questions about anything just shoot me a pm.
Hello,
It has been WAY to long.
I dont even know where to start.
I am having a lot of problems getting my personal things out of my old house.
by escort i was only allowed to take things such as cloths and very personal objects.
But all other things i was to leave until they could be proven to be mine.
How this all began was over confronting someone i thought was a friend over a drinking problem, long story short i seemed to hit a very large family heritage nerve.
And in an attempt to get my stuff back i picked the lock of the house and proceeded to pack my things up but before i got anything out of the house i was confronted by the police. not my best moment.
Some good news, My so called friend is now out of a job and is having a hard time making the payments, and with all my stuff occupying his house he cant get anyone to move in.
So this saturday we are meeting, by then i hope to be able to take my things or in the off chance it goes that well i might even be back living there.
i have been able to get online but having the stress from this whole thing was making me vomit at times.
So i decided to take up more hours at work and just deal with the things that i could deal with and in not one of my best minds i made the decision that if i cant do anything about it, i was back seating it until i could.
For that i am sorry, i don't mean to elude or ignore responsibility and the obligations i had.
I made a choice and granted it was not a good one for those who were on the other end. I feel terrible and will be making them right even if you have your money back i will still be sending out the product for the fact that i said i would.
So nothing is lost or abandoned if i owed you anything and i dont pm in the next couple of days, please pm me with the details of our transactions and i will make them right even if it means eating the cost of it.
I would not be one for moving back in, but seeing as my other option is a small apartment with 3 other people it would be a bad choice.
As i would not be able to run my 9x20x lathe or just have any room for a work bench.
So if i am unable to move back in i do have lots of hosts and other items that i will just sell off.
So if you might be interested in any of the items used to build them let me know.
As well as i had a project for a new LPM,
i have built 1 prototype but never had the time or the programmer to make it work,
it uses a usb PIC if you would be interested in a usb LPM that could be made from end to end for under 50$ material (maybe as low as 30$ in 50 order bulk)
The only work would be to program the microchip, the software would be with one that is already made.
The board is small and fit behind a 2x16x char lcd (it might have been a 2x20 lcd) and runs of 9 volts.
This is something i wanted to see work but i think even after i get back to normal i will be to busy to make it right.
But i have done lots of work in its development.
Also note it uses 90% smd parts so to make it you will need a re-flow oven and/or hot air its also double sided. with only few parts on the back side.
It would have a range of 1-5W possible depends on the coating at what point it burns off.
If you would be interested in just coding it we can work that out.
If you have any other questions about anything just shoot me a pm.
Hi Aaron, Glad to see you're back! Been trying to email you a few times though now I see why you can't answer. Well take your time, but don't forget about the laser I order'd a bit back tho, please inform me of its status... Hope things get better for you from now on.Life has its ups and downs, If bad things happen, good things will surely make up for it 
.
Best Regards,:yh:
Satoru
.Best Regards,:yh:
Satoru