jnrpop
0
- Joined
- Dec 7, 2008
- Messages
- 723
- Points
- 63
Hi guy's,
I have a Aspire Mech-Mod + 2 screw-on heatsink setup's, for sale.
I've already got a setup similar so this one is up for grab's!!!
Cost: $soldUSD
Shipping: sold USD, tracked international from Germany.
Paypal only
Sale includes:
1x Aspire Mech-mod 18650 - Brand new
1x DTR22mm Heatsink with 510 adapter to suit the Aspire
1x Custom Aluminium Heatsink with Cylindrical len's correction Module to suit
Info on the Custom Heatink:
Custom Diode Module Section:
- I built a few of these to hold DTR's 20mm copper module, also will hold a 21mm.
- Screws onto the 510 Adapter also supplied
- It measure's L65.4mm x D25mm x Thick1.5mm
- Made from Aluminium with a silver inox coating
- Has 22awg Silicone wire already installed for Plug and Play with a module
- Use's a special s/s end component to fit with the Cylindrical module explained next
Custom Cylindrical Module section:
- This section press's into the Diode module very tightly using precise machining and rubber washe's. Can be removed and re-inserted how every many time's you like.
- It Measure's: L70mm x D25mm x Thick1.5mm , Inside diameter: D22mm
- NO LEN'S INCLUDED guys, this will need to be built, similar to other setups in the NUG44 correction thread. (Len's mounted on a s/s ruler and then placed inside this module)
Any more question's please ask, There is alittle bit of work with the Custom Heatsink, so i'm not calling it Plug & Play, but it won't be hard to finish up.
Picture's will help explain.
Cheer's :beer:
I have a Aspire Mech-Mod + 2 screw-on heatsink setup's, for sale.
I've already got a setup similar so this one is up for grab's!!!
Cost: $soldUSD
Shipping: sold USD, tracked international from Germany.
Paypal only
Sale includes:
1x Aspire Mech-mod 18650 - Brand new
1x DTR22mm Heatsink with 510 adapter to suit the Aspire
1x Custom Aluminium Heatsink with Cylindrical len's correction Module to suit
Info on the Custom Heatink:
Custom Diode Module Section:
- I built a few of these to hold DTR's 20mm copper module, also will hold a 21mm.
- Screws onto the 510 Adapter also supplied
- It measure's L65.4mm x D25mm x Thick1.5mm
- Made from Aluminium with a silver inox coating
- Has 22awg Silicone wire already installed for Plug and Play with a module
- Use's a special s/s end component to fit with the Cylindrical module explained next
Custom Cylindrical Module section:
- This section press's into the Diode module very tightly using precise machining and rubber washe's. Can be removed and re-inserted how every many time's you like.
- It Measure's: L70mm x D25mm x Thick1.5mm , Inside diameter: D22mm
- NO LEN'S INCLUDED guys, this will need to be built, similar to other setups in the NUG44 correction thread. (Len's mounted on a s/s ruler and then placed inside this module)
Any more question's please ask, There is alittle bit of work with the Custom Heatsink, so i'm not calling it Plug & Play, but it won't be hard to finish up.
Picture's will help explain.
Cheer's :beer:
Attachments
Last edited: