Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

FS: sold

jnrpop

0
Joined
Dec 7, 2008
Messages
722
Points
63
Hi guy's,
I have a Aspire Mech-Mod + 2 screw-on heatsink setup's, for sale.
I've already got a setup similar so this one is up for grab's!!!

Cost: $soldUSD
Shipping: sold USD, tracked international from Germany.
Paypal only :)

Sale includes:
1x Aspire Mech-mod 18650 - Brand new
1x DTR22mm Heatsink with 510 adapter to suit the Aspire
1x Custom Aluminium Heatsink with Cylindrical len's correction Module to suit

attachment.php

attachment.php

attachment.php

attachment.php

attachment.php

attachment.php

attachment.php

attachment.php

attachment.php


Info on the Custom Heatink:

Custom Diode Module Section:
- I built a few of these to hold DTR's 20mm copper module, also will hold a 21mm.
- Screws onto the 510 Adapter also supplied
- It measure's L65.4mm x D25mm x Thick1.5mm
- Made from Aluminium with a silver inox coating
- Has 22awg Silicone wire already installed for Plug and Play with a module
- Use's a special s/s end component to fit with the Cylindrical module explained next

Custom Cylindrical Module section:
- This section press's into the Diode module very tightly using precise machining and rubber washe's. Can be removed and re-inserted how every many time's you like.
- It Measure's: L70mm x D25mm x Thick1.5mm , Inside diameter: D22mm
- NO LEN'S INCLUDED guys, this will need to be built, similar to other setups in the NUG44 correction thread. (Len's mounted on a s/s ruler and then placed inside this module)

Any more question's please ask, There is alittle bit of work with the Custom Heatsink, so i'm not calling it Plug & Play, but it won't be hard to finish up.

Picture's will help explain.

Cheer's :beer:
 

Attachments

  • IMG_2701.JPG
    IMG_2701.JPG
    94.4 KB · Views: 179
  • IMG_2694.JPG
    IMG_2694.JPG
    104 KB · Views: 89
  • IMG_2695.JPG
    IMG_2695.JPG
    105.1 KB · Views: 65
  • IMG_2697.JPG
    IMG_2697.JPG
    86.1 KB · Views: 74
  • IMG_2699.JPG
    IMG_2699.JPG
    83.2 KB · Views: 63
  • IMG_2702.JPG
    IMG_2702.JPG
    89.5 KB · Views: 167
  • IMG_2703.JPG
    IMG_2703.JPG
    78.5 KB · Views: 150
Last edited:





BobMc

0
Joined
Apr 23, 2016
Messages
3,685
Points
113
Re: FS: Aspire Mech-mod host setup

Nice, these mech mod our great. Comes with two extra adapters, sweet. Hoping for a quick sale. Best wishes
:)

Ps, you might want to mention where your located? Just a thought. :thinking:
 
Joined
Feb 1, 2017
Messages
670
Points
0
Re: FS: Aspire Mech-mod host setup

Morning Bob, did you ever drive a GMC?
I like the Chevrolet Suburban (CIA - FBI) included!
 

jnrpop

0
Joined
Dec 7, 2008
Messages
722
Points
63
Re: FS: Aspire Mech-mod host setup

Nice, these mech mod our great. Comes with two extra adapters, sweet. Hoping for a quick sale. Best wishes
:)

Ps, you might want to mention where your located? Just a thought. :thinking:

Thanks bob, updated

The adapters work great, will add a few more picture's

:beer:
 

BobMc

0
Joined
Apr 23, 2016
Messages
3,685
Points
113
Re: FS: Aspire Mech-mod host setup

Thanks bob, updated

The adapters work great, will add a few more picture's

:beer:

Your welcome;

You know, I'm really interested in this. I'm going to give a it a week or two and if nobody else has any interest, I'm will buy this. I've got a couple of mech mods already but I really like the look of this. And the price is really good. :)
 
Last edited:

jnrpop

0
Joined
Dec 7, 2008
Messages
722
Points
63
Re: FS: Aspire Mech-mod host setup

Thanks Bob,

I'm really happy with how these turned out. I've got 2 more setup's the same :)

The 2 Custom Adapter's will require alittle building or "fun time" :) to finish: Insert 20-22mm module with thermal tape/greese, solder module to pre-installed wire...etc,
The Cylindrical len's Adapter which fits perfectly into the Main adapter is the icing on the cake :beer: when finished it will allow a fully corrected, finished hand-held laser. (nubm44/nub05/6, nug01 etc)

and of course you probably know DTR's 22mm Heatsink is brilliant, good to go.

Cheers for the interest!
 
Last edited:
Joined
Jan 29, 2014
Messages
12,031
Points
113
Re: FS: Aspire Mech-mod host setup

looks interesting but I don't understand what the assembled host looks like.
 

jnrpop

0
Joined
Dec 7, 2008
Messages
722
Points
63
Re: FS: Aspire Mech-mod host setup

looks interesting but I don't understand what the assembled host looks like.

I Can help you with that Alaskan :beer:
Assembled Host:

And of course, being a Mech-mod setup, they can screw onto other battery bodies of different sizes, shapes and colours :)
attachment.php

attachment.php

attachment.php

attachment.php

attachment.php

attachment.php
 

Attachments

  • Aspire Host (4).jpg
    Aspire Host (4).jpg
    95.3 KB · Views: 143
  • IMG_2702.JPG
    IMG_2702.JPG
    89.5 KB · Views: 44
  • Aspire Host (8).jpg
    Aspire Host (8).jpg
    80.8 KB · Views: 158
  • Aspire Host (6).jpg
    Aspire Host (6).jpg
    70.7 KB · Views: 140
  • Aspire Host (5).jpg
    Aspire Host (5).jpg
    72.3 KB · Views: 141
  • Aspire Host (3).jpg
    Aspire Host (3).jpg
    97.4 KB · Views: 146
  • Aspire Host.jpg
    Aspire Host.jpg
    97.5 KB · Views: 134
Last edited:
Joined
Sep 20, 2013
Messages
17,254
Points
113
Re: FS: Aspire Mech-mod host setup

Very nice, jnrpop. Good luck with your sale. I almost have the one I bought from you paid off. :crackup:
 
Joined
Mar 5, 2015
Messages
1,336
Points
113
Re: FS: Aspire Mech-mod host setup

I'm not sure of the point of the extenders, it's nearly a 30cm laser now yes,

Can you post a pic with the DTR 510 adapter threaded straight onto the aspire that would be much more appropriate and appealing in my opinion.

I understand if you just wanted something different since we have all seen an aspire with a 510 adapter but your extension tubes are wider than the aspire so doesn't appeal to me at all, Sorry to add my opinion!



DTR used to have nicer modules also with a top cap for focus like in this photo, not sure if he still has them.
 

Attachments

  • 1498040370.1416.jpg
    1498040370.1416.jpg
    109.3 KB · Views: 35
Last edited:

jnrpop

0
Joined
Dec 7, 2008
Messages
722
Points
63
Re: FS: Aspire Mech-mod host setup

I'm not sure of the point of the extenders, it's nearly a 30cm laser now yes,

Can you post a pic with the DTR 510 adapter threaded straight onto the aspire that would be much more appropriate and appealing in my opinion.

I understand if you just wanted something different since we have all seen an aspire with a 510 adapter but your extension tubes are wider than the aspire so doesn't appeal to me at all, Sorry to add my opinion!



DTR used to have nicer modules also with a top cap for focus like in this photo, not sure if he still has them.

Don't be sorry Billy, i appreciate your opinion if you are interested in purchasing ;)

-Yep your right, we've all seen the Aspire/dtr510 adapter, setup,
This is a first generation 22mm adapter so hasn't got the focusing ring like in your photo.

For the custom adapters:
First one holds a 20-22mm module (high power diode and driver), and so is only alittle longer than jordan's 22mm510 adapter which hold's a 12mm module,
The second adapter was built to hold a Cylindrical len's setup, allowing a optically improved handheld laser, but yes it's a lengthy addition to have, so that's why you can remove and re-insert it into the first adapter :)

Really i'm selling it all as a "setup" or seperate piece's, not a complete host, but the purchaser can use it how they like, with dtr's22mm adapter, or with my custom adapters, and also you can buy a 25mm Mech mod so it's the same size as my adapters...etc

Cheers!
 
Last edited:
  • Like
Reactions: GSS
Joined
Mar 5, 2015
Messages
1,336
Points
113
Re: FS: Aspire Mech-mod host setup

I understand now cool, is there a platform in the custom tube for cylindricals or is the buyer just UV gluing the lenses in.
 

jnrpop

0
Joined
Dec 7, 2008
Messages
722
Points
63
Re: FS: Aspire Mech-mod host setup

I understand now cool, is there a platform in the custom tube for cylindricals or is the buyer just UV gluing the lenses in.

No worries, and great question.

The buyer will have to install the len's/platform assembley.

The inside diameter is 22mm, and 55mm long, room for a "ruler" style setup like Milo's or a custom platform setup. UV glue would be recommended. I have my cylindrical len's coming so havn't got that far with my Adapter setup yet.

Cheers,
 

jnrpop

0
Joined
Dec 7, 2008
Messages
722
Points
63
Re: FS: Aspire Mech-mod host setup

With DTR's 22mm Adapter:

attachment.php

attachment.php

attachment.php


Cheer's
 

Attachments

  • aspire.jpg
    aspire.jpg
    117 KB · Views: 107
  • aspire2.jpg
    aspire2.jpg
    109.8 KB · Views: 132
  • aspire3.jpg
    aspire3.jpg
    103.4 KB · Views: 129




Top