Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

7.1W 450nm Gravity power Adjustment Maglight OLED screen, TEMP, Current ++

Re: 6.35W 450nm Gravity power Adjustment Maglight OLED screen, - Multiple Sensors &

Sorry if this is a 'dumb question'. What does the accelerometer do and how are you using it?
 





Re: 6.35W 450nm Gravity power Adjustment Maglight OLED screen, - Multiple Sensors &

OVNI said:
Sorry if this is a 'dumb question'. What does the accelerometer do and how are you using it?
Click to expand...
I was told by my Drill sergeant A long time ago that there were "No Dumb Questions"

The Accelerometer measures the force of gravity against the position of the maglight. When the sensor detects a move to the Left it decreases an integer in the microprocessor telling the internal DAC to turn the laser output down, in contrast, to the right (or twist to right) brings laser current up until it reaches maximum (6.3W)

It basically acting as a gravity controlled variable switch attached to the laser driver.

M
 
Re: 6.35W 450nm Gravity power Adjustment Maglight OLED screen, - Multiple Sensors &

RDTech said:
I was told by my Drill sergeant A long time ago that there were "No Dumb Questions"
Click to expand...

Thanks. I've heard lots of people say that over my lifetime but alas only some behave that way.

I understood accelerometers measured G-force but couldn't connect the dots on your application. So with the OLED facing away from you, CCW is 'left' and CW is 'right'? Does twisting faster cause faster power adjustment or is it based on the amount of travel?
 
Re: 6.35W 450nm Gravity power Adjustment Maglight OLED screen, - Multiple Sensors &

Correct on orientation.
CCW decrease
CW increase

I thought of having multiple (proportional)speed changing, using the accelerometers' other axis for limiting how high of an angle the laser could be pointed as a safety from pointing upward at anything bad. I had lots of ideas, put some in the programming, others nope.
 
Re: 6.35W 450nm Gravity power Adjustment Maglight OLED screen, - Multiple Sensors &

Very nice, who bought this, if I might know?
 
Re: 6.35W 450nm Gravity power Adjustment Maglight OLED screen, - Multiple Sensors &

Its amazing good job ~ :whistle:
 
Last edited:
Re: 6.35W 450nm Gravity power Adjustment Maglight OLED screen, - Multiple Sensors &

hakzaw1 said:
Mitch is constantly amazing me with his unique builds-aside from Tunedcavity (Joe in Toranto) Mitch's builds are 'one-ofs' built completely from scratch-met with Mitch twice while in Florida picked up a sweet 405 burner he made from a VERY nice security camera host-- sadly it was 'stolen' from me...hak
Click to expand...

I'd like to catch someone stealing like that, just once.... maybe end up in jail myself. Hak, what security camera host was used, is there a way to link to it so I can see what it is?
 
Last edited:
Re: 6.35W 450nm Gravity power Adjustment Maglight OLED screen, - Multiple Sensors &

Amazing job. :beer:
 
Re: 6.35W 450nm Gravity power Adjustment Maglight OLED screen, - Multiple Sensors &

Yes, never seen anyone build like this. Kills me that to you this all sounds so simple lol
 
Re: 6.35W 450nm Gravity power Adjustment Maglight OLED screen, - Multiple Sensors &

It's pretty cool to get uC tech in there. I'm sure it'll easily fit the enclosure, but milling out a viewport for the display that nicely is proper work!

As for the accelerometer: I would consider reprogramming it's function. You could use it to detect motion and shut off the laser if that suddenly happens. I'm thinking off a situation where you have the laser positioned on a table and it rolls off.

Shutting off the laser will not do much to reduce damage to the laser itself, but could prvent accidents from the beam going in random direction when falling.
 
Re: 6.35W 450nm Gravity power Adjustment Maglight OLED screen, - Multiple Sensors &

Alaskan said:
Very nice, who bought this, if I might know?
Click to expand...
Nobody bought it. I just kept it around. Played with it some more.. Its now putting out 7.1W or so.. Changed the settings a bit to make it go on faster and go down slow.. As before, I can still personalize the start logo ..

Still for sale.. Make me a reasonable offer AK.
 
It is a very different project from what we usually see around here. Definitely has all the bells and whistles. I like it, but couldn't really justify the price for the extras. Still, +Rep.
 
is it focus-able? how did u get the output higher? Did u swap the diode or lens or something?
 
Re: 6.35W 450nm Gravity power Adjustment Maglight OLED screen, - Multiple Sensors &

RDTech said:
Nobody bought it. I just kept it around. Played with it some more.. Its now putting out 7.1W or so.. Changed the settings a bit to make it go on faster and go down slow.. As before, I can still personalize the start logo ..

Still for sale.. Make me a reasonable offer AK.
Click to expand...

Did not see your post until today, sorry I missed it. I would like it, but have my money going into another project right now :(
 
Re: 6.35W 450nm Gravity power Adjustment Maglight OLED screen, - Multiple Sensors &

I just hollowed out the lens holder so NO light is "clipped" It already uses a NUBM44 diode so it wasn't much of push. Not everyone realizes that when they just bring up the current to any laser with the lens already attached, there is still attenuation fom the lens. The microprocessor has a 3.3v DAC in it, but the driver uses 5V, so I just added a 5V DAC to the circuit.
 
If this is still up for sale I'd like to make and offer on it ? Spending pm.
 
You must log in or register to reply here.


Back
Top