Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

WTS: Laserbee 2.5W

borgqueenx

borgqueenx

0
Joined
Jun 30, 2008
Messages
1,660
Points
48
Picture:
http://d.pr/i/217t


for more information about the LPM i suggest you see this topic:
http://laserpointerforums.com/f39/f64/fs...now-61644.html

Price i paid was about 230 dollar including shipping.

Repaired and fully functioncal thanks to offroadfreak.
See results down the topic here: http://laserpointerforums.com/f39/f39/wt...ml#post1252906 Its quite accurate.
863mw on a 445nm kaser pointer measured by an ophir. 858mw on the laserbee i sell.
thats means accuracy is very very good!

Only asking 100 usd for it now, including shipping to all of europe.
Add 15 dollar for shipping to worldwide.
both with tracking code and insured.
 
Last edited:





Re: WTS: Laserbee 2.5W (need repair)

:crackup:
I believe the member you bought your new LPM from also had a problem with the TEC on the laserbee popping off.
http://laserpointerforums.com/f70/tec-popped-off-laserbee-73306.html


The TEC can easily be glued back on with thermal adhesive, it should work as normal after that, readings may be a little off though. :) IIRC the price to get it glued back on by Jerry is $95 + S/H
 
Last edited:
Re: WTS: Laserbee 2.5W (need repair)

If I tried to attach my sensor from my 3.2w to your screen, would they be compatible?
 
Re: WTS: Laserbee 2.5W (need repair)

Tmack said:
If I tried to attach my sensor from my 3.2w to your screen, would they be compatible?
Click to expand...

TEC based sensors only work with their corresponding LPM. They have the calibration stored in the meter, not in the head.
Professional Ophir and Coherent meters store the calibration in the sensor.
 
Re: WTS: Laserbee 2.5W (need repair)

Thanks arg. Very useful information as usual.
 
Re: WTS: Laserbee 2.5W (need repair)

ARG said:
:crackup:
I believe the member you bought your new LPM from also had a problem with the TEC on the laserbee popping off.
http://laserpointerforums.com/f70/tec-popped-off-laserbee-73306.html


The TEC can easily be glued back on with thermal adhesive, it should work as normal after that, readings may be a little off though. :) IIRC the price to get it glued back on by Jerry is $95 + S/H
Click to expand...

95. thats a good joke. i dont want to ship it back to him. i dont want to hear from him again.
 
Re: WTS: Laserbee 2.5W (need repair)

Well im open for offers guys. Used unit that needs small repair...
 
Re: WTS: Laserbee 2.5W (need repair)

Well maybe you can ask more if you ship it to me first. I can thermally glue the sensor back on and check if it is still acurate with my ophir..

I'll do it for free as long as you pay shipping.

Greetings,

Robin
 
Re: WTS: Laserbee 2.5W (need repair)

offroadfreak8582 said:
Well maybe you can ask more if you ship it to me first. I can thermally glue the sensor back on and check if it is still acurate with my ophir..

I'll do it for free as long as you pay shipping.

Greetings,

Robin
Click to expand...

Great offer :beer:
 
Re: WTS: Laserbee 2.5W (need repair)

Free bump,

Interesting I had the same model, fail in the exact same way...

I don't remember the exact numbers, but after repairing mine with some of this:
Arctic Silver Thermal Adhesive
If was only off by a few percent.
 
Re: WTS: Laserbee 2.5W (need repair)

I hadn't thought of it that way. Good as new! :p

Trevor
 
Re: WTS: Laserbee 2.5W (need repair)

would sell it for 85usd.
if not, il probaly take offroadfreak's most kind offer next week :)
 
Re: WTS: Laserbee 2.5W (need repair)

Interested, but the international shipping is a killer, Is there any way to cut that down by using a different shipping method?
 
You must log in or register to reply here.


Back
Top