Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

**** True >200mW 532nm S-KY PGL-200 handheld laser

Re: **** True >200mW 532nm S-KY PG-200 handheld la

so with the focusing one, is the focusing thingy on the diode or on the ouside? Pics? and since it has 2W diode, its more mW output right?

regards

amk
 





Re: **** True >200mW 532nm S-KY PG-200 handheld la

So as soon as 20 buy its over?
ill be paying tommorow just incase
also if 20 order sooner than the 26th does that mean we will get em sooner?
 
Re: **** True >200mW 532nm S-KY PG-200 handheld la

Hello Dr-L,

Got it,  [smiley=thumbsup.gif]

Ordered One 2W Silver. If you don't see the paymnent and see this post, please post and let me know.  ;)

ALSO< Could you Post what you believe is the Current Time Frame as you see it now? Just Curious now that the Pressure is Off.  ;D

Go figure, After I called and B!t*#d out my Card Company Last Night at 11pm for over an hour for losing my Payment, AGAIN, Low and behold, it was posted first thing after Midnight. Those Jerks had it all along, I knew it!  [smiley=angry.gif]

So after a LARGE amount of undo stress, a few broken items in the home, (I was quite upset last night-wonder what that will cost to fix everything?) and one P-O'd Wife, a Drained Bank Account, and a Maxed Out Card just before Christmas, I Got It!  :o

Aren't Lasers Just Grand! Merry Christmas to ME!  [smiley=bath.gif]

Regards,
Joe
 
Re: **** True >200mW 532nm S-KY PG-200 handheld la

DrLava,

Payment has been made, please refer to PM for more information and details.
Looking forward to receiving my precious 8-)

Thanks for organising this group buy , you ROOCKKKK ! ;)

-Laq
 
Re: **** True >200mW 532nm S-KY PG-200 handheld la

Just ordered, most expensive item i have bought online so i am a little nervous.
Keep us updated ;D
 
Re: **** True >200mW 532nm 'Aries' like handheld l

ok so i have a question, you said that they said the deal would be until the 4th, but then you said this.

drlava said:
The batteries must be charged externally,

The payment page will be up till at least the 26th, or until 20 units are paid for.
Click to expand...


so is the gb going to go until the 26th or the 4th? or until 20 are paid for?
 
Re: **** True >200mW 532nm S-KY PG-200 handheld la

They offer the deal until the 4th, but this is too long to wait from now. Also, I will limit it to 20 units, because that is already a lot of money, when you add it all up, the risk would just be too much if we got up to $10,000 in this. All said, I will be back from a visit with my in-laws on the 26th, and probably close it up around then.

Also, more details about the warranty!:

For a period of 1 month after purchase, if there is a failure or if it doesn't work properly, S-KY will repace it and pay all shipping charges. After that, for 6 months, they will pay shipping charges one way for repair/replacement.

Photos descriptions or measurements of the problem are required to initiate an RMA.
 
Re: **** True >200mW 532nm S-KY PG-200 handheld la

I find the long list of interested folks but how many firm $ orders have come in ?? Is this GB gonna make it in time ??

Mike
 
Re: **** True >200mW 532nm S-KY PG-200 handheld la

There are 9 payments already in, with more promised on Friday.
This GB is a definite GO as soon as they approve my revisions to the contract. When that hapens, the GC orders will start to be charged and transferred.
 
Re: **** True >200mW 532nm S-KY PG-200 handheld la

OMG 9 ALREADY??

i want one, I MUST FIND MONEY!!! Plz put me down, ill get the money somehow... going to talkt to parents right away.
 
Re: **** True >200mW 532nm S-KY PG-200 handheld la

Oh noooooooo, 2W diode will be hard to resist.... The reason I'm still a bit hesitant is because I currently have NovaLaser 105mW with a peak of around 130mW. This laser is "only" double the performance, with a downside of larger form factor (minimum triple the overall volume). With this kind of size, I expect much more powerful laser than just 220mW (270 peak). In my mind, laser this "big" should be able to output around 300mW average with 350 peak.

For 2W diode, if you tweak the board and increase the current, what is the output achievable? It is easy to do it ourself? I don't mind shorter diode life (5000 hours compared to 8000 hours) and shorter duty cycle or shorter continuous operating minutes with a brighter laser as a trade off...
 
Re: **** True >200mW 532nm S-KY PG-200 handheld la

If you're really into tweaking, I think a large performance increase could be achieved by making the diode mount out of copper instead of AL, and it would even be possible to put a small constant-current TEC in there by cleaving the diode mount and inserting it before the threads. At minimum, application of heatsink grease should give a small benefit over time.
 
Re: **** True >200mW 532nm S-KY PG-200 handheld la

DrLava --

Interesting idea here. Somewhere I think I saw that it may be crystal heating which lowers output power as the pump is not overdriven. Would the TEC cool the crystals too ?? Lots of thoughts on this.... let us ponder until they arrive.

Mike
 
Re: **** True >200mW 532nm S-KY PG-200 handheld la

Hemlock Mike said:
DrLava --

Interesting idea here. Somewhere I think I saw that it may be crystal heating which lowers output power as the pump is not overdriven. Would the TEC cool the crystals too ?? Lots of thoughts on this.... let us ponder until they arrive.

Mike
Click to expand...

I'm not sure if cooling the crystals would help. My impression was that the crystals would need to heat up to their optimal temperature to function best. So if they are too cold they won't work well. I also recall lab DPSS greens to have separate KTP and ND:YVO4 crystals as they would need to operate at different temperatures for optimal performance.

But I think you may be right in that the lowered output might be caused by the crystals overheating. Just that TEC cooling might be hard to control here.

Perhaps someone more knowledgeable would like to tell us more about this.

*edit* Here is what Sam's guide says:
Depending on sophistication, the pump laser diode may be mounted directly on the lasing crystal or have its beam passed through correction and collimating optics first. Thermo Electric (TE) devices may be used to regulate the temperature of the pump diode for general cooling and to temperature tune its wavelength to the optimum for the absorption band of the Nd in the lasing crystal (around 808 nm). Temperature control of the vanadate to keep it cool and happy) and KTP to keep it warm and happy to further optimize output power may also be desirable. If you are determined to generate more than a few mW of green light, all of these will be needed.
 
Re: **** True >200mW 532nm S-KY PG-200 handheld la

Xar --
Good point. I believe the crystals are separated in this laser so cooling would be a problem in these stages. I'll have to look for a piece of copper.

Mike
 
Re: **** True >200mW 532nm S-KY PG-200 handheld la

Yeah, it would be hard to control, I'd say just hook a current limiting resistor on the TEC and let the thermal equations and nonlinear optical changes solve themselves. If you're above or below the optimal equilibrium, adjust limiting resistor accordingly :) anything more probably wouldn't be worth it, as it would require complete disassembly/disalignment of the optic stack.
 
You must log in or register to reply here.





Back
Top