lazeerer
0
- Joined
- May 25, 2010
- Messages
- 3,655
- Points
- 0
Hey All, 10-8-11
Everything Is SOLD>
I have a Few new Things.
Ive Got 1 More Lab Like Heatsink. This One is Direct Press Heatsink. I Thread all the Way down in the Heatsink for your Lens. You will Not be able to use your Focusing Ring with this Setup.
THe Heatsink Is 26mm Wide x 30mm Long. The Thicker part in the back end is 28mm. It stands 1 1/2 inch tall.
Price. $12 Shipped In the Lower 48 states & +$3 For International.
I can Press in a LPC-815 and Include a Regular Acrylic Lens with Spring with Leads for $5 More. All you would need then Is A Driver.
Next Up I Have 2 Aixiz Mounts that i made Modules For. These Modules Are Press fit and are Threaded All the Way down. The Are A Couple Inches Shorter then the Actual Mounts themselves.
THe Black One is Longer in length then the Plain Aluminum. THe Black One also has A Little Chip in the Paint About 2mm round. Nothing Major.
Looking at the Black One and Why it doesn't look Flush is because it has a Larger Opening at the Front and Back witch is Only ~1mm Deep so it makes the Module not look Like a Snug Fit when Indeed it is a Snug Fit. I just want to point that out.
Aixiz Mounts are also Included.....
Price. Both for $15 Shipped In the Lower 48 states & +$3 For International.
I can also Do the Same here and Press in a LPC-815 and Include a Regular Acrylic Lens with Spring with Leads for $5 More per module. All you would need then Is A Driver.
All 3 Piece for For $23 Shipped in the USA and $26 shipped International.
:Thanks: For Looking.!!!
Both Sold.!!!!!!!!
Hey All,
Up For sale are 2 Lab Style Heatsink with Stands.
All Made from Aluminum on my New Lathe.
The Larger One on the Left is Just a tab smaller then 1.5 inches at the fattest part ..."1.460" Its a little Longer then a Full size Aixiz Module. I will include the back half of the AixiZ module with the Heatsink. I can also cut off the very back part if you like. it also Has 3 set screws in diffrent areas of the sink.
The Slightly smaller one is 1.3 inches wide "1.360" The Fines are just for looks. It will fit the top half of the AixiZ Module and around Half of the Back Part of the AixiZ Module. I will Cut the back half down to fit perfectly in there and include it with the Heatsink. It has 1 set screw on the sink.
What you get:
1x heatsink
1x Back Half of the AixiZ Module cut to size. "Front Half in not included"
Here are a couple Pictures of the Lab Heatsinks...
Picutures:
Price:
Larger Lab Heatsink is 20$ shipped in the Lower 48 and 3$ for international shipping.
Smaller Lab Heatsink is 15$ shipped In the Lower 48 and 3$ for international shipping.
Both for 30$ shipped in the Lower 48...
Both for 33$ shipped internatinal...
:thanks: For Looking
Everything Is SOLD>
I have a Few new Things.
Ive Got 1 More Lab Like Heatsink. This One is Direct Press Heatsink. I Thread all the Way down in the Heatsink for your Lens.
You will Not be able to use your Focusing Ring with this Setup.THe Heatsink Is 26mm Wide x 30mm Long. The Thicker part in the back end is 28mm. It stands 1 1/2 inch tall.
Price. $12 Shipped In the Lower 48 states & +$3 For International.
I can Press in a LPC-815 and Include a Regular Acrylic Lens with Spring with Leads for $5 More.
All you would need then Is A Driver.Next Up I Have 2 Aixiz Mounts that i made Modules For. These Modules Are Press fit and are Threaded All the Way down. The Are A Couple Inches Shorter then the Actual Mounts themselves.
THe Black One is Longer in length then the Plain Aluminum. THe Black One also has A Little Chip in the Paint About 2mm round. Nothing Major.
Looking at the Black One and Why it doesn't look Flush is because it has a Larger Opening at the Front and Back witch is Only ~1mm Deep so it makes the Module not look Like a Snug Fit when Indeed it is a Snug Fit. I just want to point that out.
Aixiz Mounts are also Included.....
Price. Both for $15 Shipped In the Lower 48 states & +$3 For International.
I can also Do the Same here and Press in a LPC-815 and Include a Regular Acrylic Lens with Spring with Leads for $5 More per module.
All you would need then Is A Driver.All 3 Piece for For $23 Shipped in the USA and $26 shipped International.
:Thanks: For Looking.!!!
Both Sold.!!!!!!!!
Hey All,
Up For sale are 2 Lab Style Heatsink with Stands.
All Made from Aluminum on my New Lathe.
The Larger One on the Left is Just a tab smaller then 1.5 inches at the fattest part ..."1.460" Its a little Longer then a Full size Aixiz Module. I will include the back half of the AixiZ module with the Heatsink. I can also cut off the very back part if you like. it also Has 3 set screws in diffrent areas of the sink.
The Slightly smaller one is 1.3 inches wide "1.360" The Fines are just for looks. It will fit the top half of the AixiZ Module and around Half of the Back Part of the AixiZ Module. I will Cut the back half down to fit perfectly in there and include it with the Heatsink. It has 1 set screw on the sink.
What you get:
1x heatsink
1x Back Half of the AixiZ Module cut to size. "Front Half in not included"
Here are a couple Pictures of the Lab Heatsinks...
Picutures:
Price:
Larger Lab Heatsink is 20$ shipped in the Lower 48 and 3$ for international shipping.
Smaller Lab Heatsink is 15$ shipped In the Lower 48 and 3$ for international shipping.
Both for 30$ shipped in the Lower 48...
Both for 33$ shipped internatinal...
:thanks: For Looking
Last edited:
Glad you like them.