Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

Sharp GH04W10A2GC 350mW 405nm

Successfully made 2W 425nm !. i will upload my violet laser build If it does not die after 2 months
It's too hot and the battery consumption is very high.
 





Miya said:
Successfully made 2W 425nm !. i will upload my violet laser build If it does not die after 2 months
It's too hot and the battery consumption is very high.
Click to expand...
Do you have LPM, and where do you base the wavelength, I am curious that, with a 2w output, you have set the driver at 1.6A, the diode will not exist after 1 hour
i mean 1 hour run
anyway,it is good build and i want to see picture man
 
Thank you for your advice. I think ... Sharp diode output is random. Lifetime output wavelength... All . if it dead someday. I want change violet to Watt green.
 
Good fun. MIght be able to last a bit if using a driver with a slow rising start. Lazeerer made some drivers for pushing the single mode 405's back in the day. On the wavelength If I remember correctly It seemed whenever I would see testing of the BDR-209's and BDR-S06J's they were reporting 410nm-415nm probably higher than 405nm due to the way we push them but they could also be rated higher than 405nm since we never had any real datasheets on them. 425nm though that is crazy. Did you spectro it?

EDIT
On that subject here is a great little blast from the past. Seems even back when they were pulling them out of PS3's the 410nm+ wavlenghte were being noted.

Strange Things About Blu-Ray (405nm)

**UPDATED 2/21/09** As I was writing a note to someone who bought a laser from me, I realized that I was "teaching" him about the eccentricities of 405nm laser light. I thought that it would be a good thing to collect these thoughts here. I will start. Please add your knowledge to this...
laserpointerforums.com
 
Last edited:
i have one more sharp multi violet laser build. It has different colors
410nm ~ 414nm 1.5w pen and 425nm 2w .
2w output 425nm laser is brighter than PL520B 160mw
Sharp diode is random.. just like Lottery ticket :giggle:
Well... I want to win the lottery ticket. :coffee:
 
I'm getting 1.505w with my diode from that gb while back. Got a flex drive hooked up to it. I wonder what wavelength it's outputting? It doesn't generate that much heat either. In fact the driver gets hotter quicker than the actual diode itself.
 
Miya said:
i have one more sharp multi violet laser build. It has different colors
410nm ~ 414nm 1.5w pen and 425nm 2w .
2w output 425nm laser is brighter than PL520B 160mw
Sharp diode is random.. just like Lottery ticket :giggle:
Well... I want to win the lottery ticket. :coffee:
Click to expand...

While it is true that the wavelength will vary to some extent, 425nm is well outside what you should expect. Maybe as high as 415nm, but I doubt any higher.
 
www.ebay.com

Adjustable 445nm 450nm 473nm 1W 1.4W 2W Blue Laser Diode Driver Power 3~5V 2.5A | eBay

Suitable for 450nm laser ld 1-2w. turn on protective circuit：yes. +/- pole：on board. Pin definition: the PCB board shows positive and negative wiring schematic. input current：2.5A max. Care Instruction.
www.ebay.com

i use this driver. not a good driver.
Also my lasers are light purple and close to blue
Very unstable current setting .. :cool:
i said.. if it die. i want change violet laser to green Watt laser
 
I changed the driver boost to 1.6A buck driver now!
I don't mind if this dies. If it do not die, my luck is good.
2w violet... good :love:
 

Attachments

  • 20190728_033747.jpg
    20190728_033747.jpg
    303.3 KB · Views: 20
So far my build is still running fine. With a copper heatsink I'm sure it's running better because of that. 1.6W is crazy powerful for 405. It's amazing
 
Attached! here 425nm 2w and 412nm 1.5w
 

Attachments

  • 1564319790059.jpg
    1564319790059.jpg
    162.8 KB · Views: 35
Looks good! Are you still using real short run times? Have fun. Be safe!
 
6sec.. 20 sec rest..
Pen host build very short run time
But i'm fine.
 
Miya said:
425nm 2w and 412nm 1.5w
Click to expand...
Didn't read entire thread but how do you know that it is 425nm and not 424? (I dont think this high. Just as Paul said). Do you have spectroneter? My BDR build is maybe higher wavelength too but I don't have spectrometer so i call it 405nm. Measuring wavelength with eyes is like measuring power of laser depending on how well can it burn tape. Just this otherwise I like your builds 2W have to be awesome!
 
You must log in or register to reply here.


Back
Top