Sale thread/ Hosts/Heat Sinks/Focus adapters/lasers

[ChrisH727]

Rich,
I am so glad I found you on the forum. I really appreciate the work you have done for me, both in fixing and upgrading my existing laser and in building the blue one for me.
It is very refreshing in this day and age to find someone as trustworthy as you.
Everything from communication, pricing options, shipping, etc... was top notch.

Thanks again,
Chris

 

[Lifetime17]

Hi,
Glad your satisfied just keep the duty cycles down 30 on 30 off . And be safe and take care of them .
Rich

 

[Blackholesun]

Hello Lifetime17.
Where is your sales page? I can't seem to find it. I am looking for a host or two.
Thanks.

 

[Lifetime17]

Hello Lifetime17.
Where is your sales page? I can't seem to find it. I am looking for a host or two.
Thanks.

Hi,
Just click on the #87 and you will see what I have to offer. Then scroll to the bottom there are 3 pages of builds.
Blak hole sun by Soundgarden nice. great group ...
Rich

 

[Photon Master]

Wow I just came across this thread and your builds are stunning Rich… do you sell the complete laser or just the hosts? I have half a dozen lasers including Sanwu’s but I’ve never built one…

 

[paul1598419]

Rich can build you a laser. PM him with your preferences.

 

[Lifetime17]

Wow I just came across this thread and your builds are stunning Rich… do you sell the complete laser or just the hosts? I have half a dozen lasers including Sanwu’s but I’ve never built one…

Hi,
With my hosts you can complete a build in no time. All my hosts are prewired and all you need to do is solder two wires and heat shrink the solder joints with shrink tubing , slide in the module tighten set screw done. All DTR's modules come complete you choose diode , driver Amp setting and lens with wire leads.
Rich

 

[Photon Master]

Hi,
With my hosts you can complete a build in no time. All my hosts are prewired and all you need to do is solder two wires and heat shrink the solder joints with shrink tubing , slide in the module tighten set screw done. All DTR's modules come complete you choose diode , driver Amp setting and lens with wire leads.
Rich

Hey sorry for the late reply. Those hosts are beautiful but honestly, even the soldering might be beyond my ability level

 

[Lifetime17]

Hi,
Ok if your not sure about your ability to complete a full build, you can also commission a host and send me the Diode ,driver and lens of your choice from DTR In your choice of copper module prewired and I will help you out.
Rich

 

[Unown (WILD)]

I hope you don't leave any time soon lifetime. You're an asset to this forum

 

[Lifetime17]

Bump 110.00 + 8.45 Priorityshipping
Custom 465nm in a 2x18350 Host..

7A78F101-00DD-4621-9EBF-22A49E43E807.jpeg

• Lifetime17
• Jan 28, 2021

Rich

 

[Lifetime17]

Reduced ....FOR SALE..40.00 + 8.45 priority s/h
Hi,
Here is a 1X14500 powder coated sink and adapter , prewired for a DTR 12mm module. Great for a 488 or similar diode .
Rich

 

[Lifetime17]

Hi,
SOLD TY....
462nm , holds 2x18350
reduced...
Thank you Rich

 

[Lifetime17]

SOLD .....
Hi,
Ok here is a 2X18650 host with a copper module with driver shelf. The host is prewired in a huge aluminum heat sink. Also has a focus adapter for the Sanwu Beam Expander . BE not included ....
Rich

 

[Lifetime17]

FOR SALE... 60.00 + 8.45 Priority shipping USA..
Hi,
Here is a 1X14500 violet powder coated host prewired for a DTR 12mm copper module.
Has a full copper heat sink and focus adapter.
Rich

 

[hazerkitten]

Bump 110.00 + 8.45 Priorityshipping
Custom 465nm in a 2x18350 Host..

7A78F101-00DD-4621-9EBF-22A49E43E807.jpeg

• Lifetime17
• Jan 28, 2021

Rich

id be interested in this one =X