Serious output, almost 2W of 405nmFOR SALE .. 150.00 + 8.45 Priority shipping
Here is a Black Satin powder coated host. On it is a Sharp GH04W10A2GC 405nm diode it holds 2X18350 batteries with a G2 lens .
It has a side button latching switch and a rear r latching switch for safety. Thanks for looking..
Power test was done with two efest 18350 batteries half charged.
RichView attachment 72216View attachment 72217View attachment 72218View attachment 72219
Hi Red,That's a great looking unit, the tail and side switches are also a good safety feature.
Hi, SOLD Thank You..Hi Rich,
New to all this. I wanted to do 2 builds. both will need 2x18650 hosts. you got anything left that can handle a 3W 445 and maybe a 1W 520.
Thanks in advance.
Hi,Hey Rich, if you give people the option of you threading the M9x0.5 threads all the way through, that is no lip/ridge to stop the G2/G8 lens then they can use it to lock down an infinity focus of the primary ( G2/G8 ) and then screw on the 3XBE and do all their focusing with the beam expander.
You could even make them one of each, one with the lip/ridge so they can adjust their G2/G8 and another without a lip/ridge for locking down the primary.
That sound great Red I will do a prototype and I can make it longer also. the one in the pic is 1/2 thick by 1-1/4 Dia. made them for a customer .Yes I am saying just like you make them right now threaded for the sanwu on one side and the M9 on the other only finish by running the m9 tap all the way through removing the lip that normally stops the G2 or G8 lens.
That way the user can reach in with a screwdriver to adjust the primary ( G2/G9 ) to infinity and holding it with a screwdriver snug the adaptor all the way down, holding the infinity focus, so there is zero gap under the adaptor, then screw on the 3XBE and do all the focusing with the 3XBE
You may want to make the adaptors a little thicker so lenses like the G8 won't run into the sanwu when it's screwed in.