Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Sale thread/ Hosts/Heat Sinks/Focus adapters/lasers






Just how many different hosts to you have??
They just keep coming and coming:)
 
Hi GSS
Putting us a Mag Light for sale today . 7300+ mW's AL copper core
Also thinking about some hex AL heat sinks

Rich:)
 
Hi, Rich. It looks like the package you sent me is out for delivery today. I should get it in the next few hours. Thank you.
 
Wow! Thank you, Rich. I got a nice miniature flashlight build with an ML501P73 635nm diode in it and a copper heat sink with a very nice copper focus adapter. It has a high current LiMn 14500 battery in it. I have some of these in my stock too. It is a camo Cree Ultrafire host. I have the same flashlight in red alloy that has a Q5 LED in it and puts out quite a bit of light for its size. It is a real beauty. Thank you, Rich!
 
Last edited:
Hi Paul,
My pleasure buddy enjoy i got about 1+ W's check it with fresh cells , Its an open can with a G2 glad you like it.

Rich:)
 
It's a real beauty. I love it. Thank you so very much. I'll do a review on it once I'm done with the Thor review. I'm posting this from my tablet and it is strange since I have't been on it in many months.
 
Hi Paul .
awesome looking forward for the review buddy, glad you like the EDC build i will be greatly appreciated when you post the thread

Rich:)
 
Hi Everyone,
Here i have for sale a Mag Light Nubm44 SXD settee 4.5A/ G2 Lens / Takes 2-32650's or 2- 26650's with a battery sleeve. Also the driver is Heat sinked to a generous piece of copper and both are thermally epoxied to the inside of the battery tube. The main heat sink has a copper core pressed in and Arctic Silver is applied with copper dust mixed in and set. It has a lanyard loop with stop. The tail cap is bored out to make battery installation easy. This build is a monster and deserves the 9mm NUBM44 diode. Also you have a choice of a G2 or a 3 element lens. Thank You for looking LPF members. Oh also here are some pics of the LPM readout with the 2-32650's installed
Please check out the other builds i have for sale and i do take some requests .
$265.00 shipped ...

Rich:)
 

Attachments

  • IMG_3048.JPG
    IMG_3048.JPG
    185.5 KB · Views: 38
  • IMG_3049.JPG
    IMG_3049.JPG
    178.7 KB · Views: 39
  • IMG_3044.JPG
    IMG_3044.JPG
    164.3 KB · Views: 44
  • IMG_3043.JPG
    IMG_3043.JPG
    134.1 KB · Views: 41
  • IMG_3046.JPG
    IMG_3046.JPG
    226.6 KB · Views: 42
  • IMG_3050.JPG
    IMG_3050.JPG
    182.5 KB · Views: 38
  • IMG_3051.JPG
    IMG_3051.JPG
    148.9 KB · Views: 40
  • IMG_3052.JPG
    IMG_3052.JPG
    146.3 KB · Views: 32
Last edited:
Very nice looking NUBM44 build. It will be my pleasure to review this little beauty you sent me. :wave:
 
Hi Paul,
Awesome i like building a quality laser so folks can enjoy them.Thank you for all your help pal.

Rich:)
 
Lifetime17 said:
Hi Paul,
The C11 side button has a M140 set to 1.7A X Drive, G2 lens, 1900+W's . This one has a nice heatsink with mass but a flush mount,Low profile focus knob,..

Making this labby sink with cooling for a customer waiting on my band saw , going to try some cooling fins wish me luck buddy.

Thanks paul

Rich:)
Click to expand...

Looking good Rich, so impressive. :gj: Some happy campers in the future. :)
 
You must log in or register to reply here.


Back
Top