Sale thread/ Hosts/Heat Sinks/Focus adapters/lasers

[RedCowboy]

I bought some surplus 22mm sinks that had been under sized on the threaded end from the mohgasm IIRC and I hand fitted them into some builds by hand without that 510 screw in, the only 1 that I had with a 510 end cap I got from DTR and I actually soldered to that pin, I didn't know it would come out until I saw it in a post later.

 

[Lifetime17]

Hi,
That is the birthplace of saint Pio of Pietrelcina

 

[Lifetime17]

Hi Red,
its a press fit with a nylon bushing. I have the original end caps if you need one for the V1 510

Rich

 

[RedCowboy]

I used my aspire host for a while but the 10 second time out is a PITA and the side button is too easily actuated for pocket carry so I'm not going to use it anymore, but thanks for the offer.

 

[Lifetime17]

Hi Red,
no problem i don't use mine either they just in mothballs.

Rich

 

[3DLaSeRBuiLDeR]

Hi,
That is the birthplace of saint Pio of Pietrelcina

Exactly Rich !

Do you are devote of him ? do you have any him photo in your house ?​

 

[3DLaSeRBuiLDeR]

I bought some surplus 22mm sinks that had been under sized on the threaded end from the mohgasm IIRC and I hand fitted them into some builds by hand without that 510 screw in, the only 1 that I had with a 510 end cap I got from DTR and I actually soldered to that pin, I didn't know it would come out until I saw it in a post later.

Good alternative idea ,

Many Thx Red :beer:​

 

[lasersbee]

Exactly Rich !

Do you are devote of him ? do you have any him photo in your house ?​

Good alternative idea ,

Many Thx Red :beer:​

You have been on the Forum long enough
to know better than to Double Post...
You can easily combine or edit posts
by using the [EDIT] button at the bottom
right of any of your Posts....

Jerry

 

[Lifetime17]

Hi,
Sale on this prewired host it has a side button and take 2-18650 batteries. A full copper heat sink and a brass recessed focus adapter. This will produce a long duty cycle can sink the driver to the back of the sink or inside the bell.
$65.00 + 7.15 2-day priority shipping.
Thanks for looking..

Rich

 

[3DLaSeRBuiLDeR]

You have been on the Forum long enough
to know better than to Double Post...
You can easily combine or edit posts
by using the [EDIT] button at the bottom
right of any of your Posts....

Jerry

Yeah, thanks for reminding me Jerry :beer:​

 

[Lifetime17]

Hi 3D,
Yes edit its a great feature handy and you won't be reprimanded so much ..

Rich

 

[3DLaSeRBuiLDeR]

Hi 3D,
Yes edit its a great feature handy and you won't be reprimanded so much ..

Rich

Thanks so much

Do you are devote of him ? do you have any him photo in your house ?​

 

[GSS]

Hi,
Sale on this prewired host it has a side button and take 2-18650 batteries. A full copper heat sink and a brass recessed focus adapter. This will produce a long duty cycle can sink the driver to the back of the sink or inside the bell.
$65.00 + 7.15 2-day priority shipping.
Thanks for looking..

Rich

Let's not lose this sight of this great ready to go plug and play host that's ready to take on any diode you can throw in it..
This is a steal Rich:beer:

Please 3D don't post back with nonsense...

 

[Lifetime17]

Hi GSS,

Thank you this host has a nice chuck of CU and a recessed focus adapter as stated, Side button also / 2-18650's for power.
Thank you for the reply always appreciated buddy.

Rich

 

[3DLaSeRBuiLDeR]

Let's not lose this sight of this great ready to go plug and play host that's ready to take on any diode you can throw in it..
This is a steal Rich:beer:

Please 3D don't post back with nonsense...

* Sorry GSS where would this not sense?
​

 

[MultirotorBill]

Hello Im looking for a host and heatsink . I will be using a NUBM44 diode with an sxd 4.5amp driver and probably use 3x 18650's... Hopefully you have something that will work .