Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

RESOLVED BY COMMUNITY! - Bad experience with Bwhollen

Status
Not open for further replies.
Re: VERY BAD EXPERIENCE with 'bhwollen'

This is a very good question and WE do need an answer !
It would seem there is no set of rules for this, I think we as a
body of people should vote on something like this, just like
the old ban polls worked, after all who is the LPF but us.


Trevor said:
What does it take before someone is no longer allowed to do business on LPF?

-Trevor
Click to expand...
 





Re: VERY BAD EXPERIENCE with 'bhwollen'

The driver is backwards! :crackup:
How do you even do that?

Upperlevel I am sorry that this happened to you, but I hope you plan on sticking around.

It seems to me that since the driver was backwards it somehow connected directly batteries>sense resistors>LD and so was drawing quite a few amps which is why it worked at first then died and also why the resistor burnt.
 
Re: VERY BAD EXPERIENCE with 'bhwollen'

Definitely sticking around, so many other members make it worth it, Jeff case in point. Also received yesterday a great 450mw dilda from Dave that works fantastically and has the best beam I have had at night.

Also, from what I remember ben's laser working for a second, it was no where near as blue as this one I have now, muvh more violet. Not a bad thing tho.
benmwv said:
The driver is backwards! :crackup:
How do you even do that?

Upperlevel I am sorry that this happened to you, but I hope you plan on sticking around.

It seems to me that since the driver was backwards it somehow connected directly batteries>sense resistors>LD and so was drawing quite a few amps which is why it worked at first then died and also why the resistor burnt.
Click to expand...
 
Re: VERY BAD EXPERIENCE with 'bhwollen'

benmwv said:
The driver is backwards! :crackup:
How do you even do that?

Upperlevel I am sorry that this happened to you, but I hope you plan on sticking around.
Click to expand...

I didn't even see that the first time round! :crackup: Must of been in a hurry to make it.

BH needs to pay for this. Bad soldering, lack of shrink wrap, No heat sinking on the driver and the driver is in reverse!
 
Re: VERY BAD EXPERIENCE with 'bhwollen'

NO I looked at it and it looked like a Aixiz 405 glass but I didn't want to rely on just looks so I put it in my laser and it has that nice clean dot like a Aixiz 405 makes, nothing at all like a G-1 lens.

It's a Aixiz 405 glass I'm sure !



InfinitusEquitas said:
@Flaminpyro

Did it come with a g1 lens?
Click to expand...
 
Re: VERY BAD EXPERIENCE with 'bhwollen'

1.8W laser... from a jib that is not heatsinked at all, and no g1 lens.

Forgetting for a second all the other issues, such as driver being backwards, no heatshrink, and piss poor soldering...

This to me seems like it's also a case of blatantly false advertising.

Also known as lying.
 
Re: VERY BAD EXPERIENCE with 'bhwollen'

Didn't this unit sell for some crazy $200 + price tag too?

Correct me if I'm wrong, but surely the repairs (which in reality are basically the entire replacing of both diode and driver) won't cost more than $100?

Ben should pay the whole repair bill, not half - and even at that, he'll still be turning a profit on this laser.

What I don't get is how this even passed the "flick it on for 5 seconds to make sure it works" test, that even a non-builder would put a cheap NewWish pointer through before selling it.
 
Last edited:
Re: VERY BAD EXPERIENCE with 'bhwollen'

rhd said:
Ben should pay the whole repair bill, not half - and even at that, he'll still be turning a profit on this laser.
Click to expand...

My suggestion of half was before Jeff confirmed it wasn't a g1 lens....

If this was done via credit card I'd suggest Upperlevel send that pile of crap back and do a chargeback.

I absolutely HATE false advertising.
 
Re: VERY BAD EXPERIENCE with 'bhwollen'

I agree Ben should pay for all the parts, driver and LD, Rpaloalto has donated $10.00 towards the repair, it will go to postage, and I am fixing it for free.
And yes if he got that much he still will make some money, even though he doesn't deserve it after making this master piece :wtf:

Yes how on earth did it pass a test run of more than a couple seconds :thinking:

when I make a laser it gets run many times and sometimes even hauled around with me for a day or so just to be sure it takes a lickin' and keeps tickin' ;)

I tend to agree with InfinitusEquitas, 1.8 W from a jib drive and no heatsink and no G-1 lens, this is starting to sound like either he doesn't know what he is talking about or blatant false advertizing :thinking:

and for 1.8W you should have a cherry picked diode/ a very efficient one, where did he get the diode ?


rhd said:
Didn't this unit sell for some crazy $200 + price tag too?

Correct me if I'm wrong, but surely the repairs (which in reality are basically the entire replacing of both diode and driver) won't cost more than $100?

Ben should pay the whole repair bill, not half - and even at that, he'll still be turning a profit on this laser.

What I don't get is how this even passed the "flick it on for 5 seconds to make sure it works" test, that even a non-builder would put a cheap NewWish pointer through before selling it.
Click to expand...
 
Re: VERY BAD EXPERIENCE with 'bhwollen'

It was paypal, and my account got screwed over, and it was through bank and it was two payments.
Charging back isn't an option, ben just needs to own up full on.
 
Re: VERY BAD EXPERIENCE with 'bhwollen'

It sure would be good to hear from Ben, some one want to send him a PM- Email- maybe a phone call and let him know...

I don't know if he's on here, how dose this thing work :thinking:
 
Re: VERY BAD EXPERIENCE with 'bhwollen'

Flaminpyro said:
It sure would be good to hear from Ben, some one want to send him a PM- Email- maybe a phone call and let him know...

I don't know if he's on here, how dose this thing work :thinking:
Click to expand...


Dont think hes interested.. :undecided:

General Information

Last Activity: Today 12:08 AM
Current Activity: Viewing Index Laser Pointer Forums - Discuss Lasers & Laser Pointers
 
Re: VERY BAD EXPERIENCE with 'bhwollen'

He'll read it at some point... he definitely lurks on this thread.

Ben... as the saying goes, speak now, or forever hold your peace.

Not sure what's there to say, except maybe to take responsibility... but now is the time.
 
Status
Not open for further replies.





Back
Top