red off SF-AW210

[lpstealth]

Hey guys I tried searching but it kept taking me to the 405nm section.

I was wondering if anyone has the specs on the red diode from a SF-AW210 sled (votage, max current, and power) if possible.

Thanks a bunch guys.

 

[Leodahsan]

I think it is the common LOC we use out here. Maybe not..
don't exceed 250mA (400mA as chipdouglas said) and it is good. some research on forums is good sometimes


edit: voltage 2.2v~3v

 

[chipdouglas]

i'm horrible at remember catalog numbers. but if it is the LOC it is actually good up to 400ma.

michael.

 

[lazeerer]

Its a 16x SOC. Keep it under 350mA and your good.

Heres a Nice Round up of Red diodes including the SOC:
http://laserpointerforums.com/f50/red-laser-diode-roundup-36202.html

It is called Short die Open can in the chart so you dont get confused. At 350mA you should be ~200mW. I would set it in between 320mA-340mA. But it is your final decision where you want to set it to.

:beer:

 

[Mohrenberg]

Yeah the Short Open Can (SOC) we normally run 300-350mA

If you put it side by side with a Long Open Can (LOC) you'll notice the die on the diode is shorter than the LOC.

 

[random person]

Whats the pinout for these guys? Same as the 405?

 

[lazeerer]

Whats the pinout for these guys? Same as the 405?

The Pin Out for the Red is the Same as a LPC-815.

The pin out for the 405nm 6x diode is the same pin out as a 445nm diode.

Hope that helps.

 

[random person]

Te Pin Out for the Red is the Same as a LPC-815.

The pin out for the 405nm 6x diode is the same pin out as a 445nm diode.

Hope that helps.

Thanks, works great! Meters at 200mW with 330mA.