Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Red laser diode roundup

drlava

drlava

0
Joined
Mar 7, 2007
Messages
1,152
Points
0
There are a lot of red 660nm laser diodes available on the market in various forms and from various sellers.  Here's a roundup of what has been and is currently available.  Note the three groups of lasing thresholds.  They seem to be caused by three different resonator lengths, and are related to max. output and voltage drop. All tests were done with aixiz collimators with multi-element glass lenses.

diode_red_roundup.PNG


As more diodes become available, I hope to add to the list.
 





Here you go guys -- everything needed for red laser design ;D
Finally, no more questions about Ild vs PO. This data is close to my curves and
NOW all together.

Great work DrLava ..........
Mike
 
I'll be saving that picture for future referrence. Thanks for all the work lava.
 
Great work drlava! Really nice to see them all together on one graph! 8-)
Thanks!
Jay
 
Very nice info, I always save all your graphs for reference in the future, but this one is definitely the master of graphs. You have quite a collection DL. I see my short open can in there. ;D
May I ask where you got the last two diodes? (SLD1239JL (sony) and RLD65PZB5 (Rohm))
 
Hi, glad it can be of help to you. The SLD1239JL is one from senkat's 'bad batch' a bit ago, the -54 diode is a sample of what he sells now, much better.

The RLD65PZB5 diode is one from the first red laser diode group buy I did, which took place before LPF existed.
 
drlava said:
Hi, glad it can be of help to you.  The SLD1239JL is one from senkat's 'bad batch' a bit ago, the -54 diode is a sample of what he sells now, much better.

The RLD65PZB5 diode is one from the first red laser diode group buy I did, which took place before LPF existed.
Click to expand...

Probably doesn't matter anymore, but it would be interesting to see the earlier Sony/Senkat diode in comparison there. The ones that were before the 'bad batch'.
Jay
 
Nice graph Doc, that sorts a few thing out for me..........

Regards rog8811
 
jayrob said:
it would be interesting to see the earlier Sony/Senkat diode in comparison there. The ones that were before the 'bad batch'.
Jay
Click to expand...
True, unfortunately I don't have any and since they aren't currently being sold except on ebay there isn't much point. If someone has one they want to send, it can be included.
 
Cool - great job.

So the Phazor really does have all those plateaus when you get above 250mW. I thought it might have been my test setup.
 
Interesting to see that there are a few cohorts of treshold currents, and as the treshold is pretty much a function of active area size, it would be interesting to find if it could be used to electrically distinguish between diodes. For that they would have to be measured at a standard temperature though.
 
May I ask what kind of lens did you use to test them? Would it make a big difference with other types of lenses? :-/
 
Switch said:
May I ask what kind of lens did you use to test them? Would it make a big difference with other types of lenses? :-/
Click to expand...

Hi, sorry it should have been in there. Aixiz glass lenses were used as a standard collimator.
 
Switch said:
May I ask what kind of lens did you use to test them? Would it make a big difference with other types of lenses? :-/
Click to expand...

According to those readings, he must have been using an AixiZ acrylic (with plastic cut away). Or equivalent. Right drlava?

If so, I can tell you that an AixiZ glass lens will give roughly the same, or just a little better (less than 10mW's).

However, if you don't mind spending the extra money, a Meredith glass lens will give you about 20% increase in power.

That said, the AixiZ acrylic (plastic cut away), is still the best 'bang for the buck'. Because of the ability to focus better, it is a better burning lens, even at less power!
Jay

Edit: Oh...he answered while I was going on and on...Lol.
 
I have tested one of my Phazor diodes and it matches your graph all the way. I left it set outputting 240-250mW at about 360mA.

I also tested this without any lens and its straight out 315-320mW !!!

regards

Milos
 
You must log in or register to reply here.


Back
Top