Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Prices Dropped: C11 Side Clicky 1x18650 or2x18350 Host Kits

Re: FS: C11 Side Clicky 1x18650 or2x18350 Host Kits (Copper Option) (Coming Back!!)

What about copper host? ;) lol
 





Re: FS: C11 Side Clicky 1x18650 or2x18350 Host Kits (Copper Option) (Coming Back!!)

How about copper mace of doom :thinking:
 
Re: FS: C11 Side Clicky 1x18650 or2x18350 Host Kits (Copper Option) (Coming Back!!)

vsbeen said:
How about copper mace of doom :thinking:
Click to expand...

I was thinking the same thing actually! If there enough takers for the copper C11's you should put out a feeler mike. Could you use the same size copper rod for both the mace of doom and the C11's?

Also the C3 GB are you just going to sell them like you did with these?
 
Re: FS: C11 Side Clicky 1x18650 or2x18350 Host Kits (Copper Option) (Coming Back!!)

mhemling33 said:
What about copper host? ;) lol
Click to expand...

...No. I would be open to making copper hosts if I had a much nicer lathe though. ;)

vsbeen said:
How about copper mace of doom :thinking:
Click to expand...

This is possible, although much more expensive. It'd be about an extra $50 for a Copper Mace of Doom (Not extended heatsink). And I would need minimum 10 people interested.
 
Last edited:
Re: FS: C11 Side Clicky 1x18650 or2x18350 Host Kits (Copper Option) (Coming Back!!)

mhemling33 said:
I was thinking the same thing actually! If there enough takers for the copper C11's you should put out a feeler mike. Could you use the same size copper rod for both the mace of doom and the C11's?

Also the C3 GB are you just going to sell them like you did with these?
Click to expand...

The C11's I did because I saw there was a bit of interest plus I really like the C11's so I don't have a problem stocking them. The C3's I would need more interest before pulling the trigger, more people saying they definitely want one, and if I do it this way, they will cost more, if it is a GB they will cheaper, although the difference is only a few dollars.

The Mace of Doom would require 2.25 copper bar, I really only need 2.050 though... The C11 requires me to get 1.75. And I am also using C145 to get better finishes as C110 is much harder to work with and get good surface finishes.
 
Re: FS: C11 Side Clicky 1x18650 or2x18350 Host Kits (Copper Option) (Coming Back!!)

Yeah you really can't go wrong with stocking the C11's and the copper option IMHO is a really good idea.

It was wishful thinking that you could use the same rod lol too good to be true

Are you back home yet? I am planning on buying some lights pretty soon to send your way.
 
Re: FS: C11 Side Clicky 1x18650 or2x18350 Host Kits (Copper Option) (Coming Back!!)

I'll only be home for a week between the 15th and 21st. Then I come back for summer term. I don't have summers off.

And we are looking at getting a much nice lathe right now. Something we can do some real work with hopefully. ;)
 
Last edited:
Re: FS: C11 Side Clicky 1x18650 or2x18350 Host Kits (Copper Option) (Coming Back!!)

I'd be down for a smooth flow with copper heat sink. They can fit 2 18350's right?
Also any idea on ETA?
 
Re: FS: C11 Side Clicky 1x18650 or2x18350 Host Kits (Copper Option) (Coming Back!!)

Copper heatsink aluminum smooth flow? I'm pretty sure they do fit 2x18350s, but I don't quite remember. ETA is going to be probably around a month. That's till the C11's get here and I get enough people interested in copper and then copper gets here plus machining.
 
Re: FS: C11 Side Clicky 1x18650 or2x18350 Host Kits (Copper Option) (Coming Back!!)

Mrcrouse said:
Copper heatsink aluminum smooth flow? I'm pretty sure they do fit 2x18350s, but I don't quite remember. ETA is going to be probably around a month. That's till the C11's get here and I get enough people interested in copper and then copper gets here plus machining.
Click to expand...

Yep copper HS, alu smooth flow.
 
Re: FS: C11 Side Clicky 1x18650 or2x18350 Host Kits (Copper Option) (Coming Back!!)

Ok, noted. 3 Interested in copper heatsinks now.
 
Last edited:
Re: FS: C11 Side Clicky 1x18650 or2x18350 Host Kits (Copper Option) (Coming Back!!)

Yes they do take 18350's and Mrcrouse did you get that C8 I sent you?
 
Re: FS: C11 Side Clicky 1x18650 or2x18350 Host Kits (Copper Option) (Coming Back!!)

Yes I did! Helped out great for some others who ordered C8's from me outside the GB. Thanks!
 
Re: FS: C11 Side Clicky 1x18650 or2x18350 Host Kits (Copper Option) (Coming Back!!)

No problem man
 
Re: FS: C11 Side Clicky 1x18650 or2x18350 Host Kits (Copper Option) (Coming Back!!)

I'm interested in a kit with a smooth flow focus adapter. Possibly more, but one for sure.
 
Re: FS: C11 Side Clicky 1x18650 or2x18350 Host Kits (Copper Option) (Coming Back!!)

Noted. Thanks!
 
You must log in or register to reply here.


Back
Top