Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Prices Drop! 501B Kits (Plug-N-Burn add a Module w/ Driver!) Starting at $20ea

Tried PM'ing you about a few of these, never got a response back.

Responded now. I get a lot of messages and sometimes they slip through the cracks, so if I don't respond after a few days, message me again, or better yet post on one of my threads. If someone posts on my threads, I get an email notification. Not for PM's though.

Wondering if you would ship to Australia? I'd take a black knurled knob kit off your hands.

Yes we can ship to Australia, I'll get you a shipping quote.
 





Responded now. I get a lot of messages and sometimes they slip through the cracks, so if I don't respond after a few days, message me again, or better yet post on one of my threads. If someone posts on my threads, I get an email notification. Not for PM's though.

Understood, I replied back to your PM that you sent back to me, just need your email so that I can pay for the three hosts that we discussed.
 
My Zaser handles the heat of a 9mm very well. And is probably one of the best hosts I have.
 
Tmack, how much we talking about here? I mean in total, shipping, handling, and the whole nine yards? I am interested but may have to wait until 2/3/14 to purchase. Will be anxiously awaiting your response. Thanks, Paul
 
Oh I was saying mrcrouse makes Zasers. I wouldn't hop on someone's thread offering to sell something :)

Mrcrouse will gladly make you one, if he doesn't have any ready. I believe they are $115

My Zaser is my baby!
 
Last edited:
Mike, I am about to start on my first 445 nm 9 mm build and was so impressed by your 501B I'm sure you will have something that will work well for me. Money is a little tight right now, but that will change soon. I'm thinking of something very functional, not necessarily really awesome looking. I'm going after 3 watts so it will have to have a good heat sink and I would like to get a reasonable duty cycle out of it. Tmack told me about your Zaser that he got from you, but I don't know what you may have in mind. Please get back to me when you have the time. Thanks, Paul
 
Hi, well the host design is up to you. All of our custom hosts have great heatsinking capabilities. The Zaser however does have a bigger heatsink. It is up to you really. We can do other custom work as well; build it however you want.
 
Im just inquiring about your 501b heat sinks. I have been keeping an eye on your work and ive been meaning to make my own heat sinks. However it looks as though you know what your doing and your work looks great. I own 5 × ultrafire housings.

Are you able to sell me 5 × heat sinks (only - separate to housing) with the contact boards and the knurled focus knob?

What are the dimentions for the driver behind the contact board housing?

If i was to have you redesign the standard 501b Heat sink, can you make it protrude a further 10mm out of the housing bezel?

I understand the postage cost, are you able to post to Australia?

If all is possible can you please send me a quote?

my email is: elliotlindsay@hotmail.com

Thanks heaps
Elliot
 
Are you guys able to make a custom blue host with a 445nm diode and module ready to run out of the box?
 
Are you guys able to make a custom blue host with a 445nm diode and module ready to run out of the box?

We do not sell complete lasers, but we can work with someone else to get one built for you. The other and cheaper option is to buy a module from DTR:

https://sites.google.com/site/dtrlpf/home/diodes

That already has the driver attached. Then all you need to do is solder those leads to our leads, cover them in some heatshrink etc. and you're good to go.
 
We do not sell complete lasers, but we can work with someone else to get one built for you. The other and cheaper option is to buy a module from DTR:

https://sites.google.com/site/dtrlpf/home/diodes

That already has the driver attached. Then all you need to do is solder those leads to our leads, cover them in some heatshrink etc. and you're good to go.

Sorry if this is a dumb question but if I buy the black no knob kit to focus the beam I would just turn the small ring on the diode/module that was pressed in?
 
The module will have a lens that has a small ring to adjust focus. (very small)
 


Back
Top