Preview/Update [4/4] FINAL RELEASE: The Cypreus II - Custom Copper Host by Sinner

[sinner]

THE CYPREUS-II : Final Release

This is the Final revision of Cypreus-II , All copper, Some updates and features include.

- Drop-In Module heatsink.
- Set-screw for module adjustment.
- Accepts all 12mm modules with custom driver settings.
- Accepts all DTR modules with driver attached.
- Accepts all 17mm Drivers.
- Custom Battery Configuration EDC(18350) , Standard (18650) and XL Ltd. (2x18650)
- Beautifully finished surface (unpolished)
- Super Extended Duty Cycles.
- Plenty of Copper ensures enhanced diode life at enthusiastic currents.
- Grooved Handgrip.
- Smooth Focusing with Pre-Installed O-Ring.
- Removable tail-switch assembly for easy maintainence and repair.
- Solid Brass contacts for Extremely low resistance at higher currents.
- Straighforward assembly and plenty of space for wiring.
- Accepts protected/unprotected 18650's
- High Current (3A) switch.


Time for some imagery..

Special Release: CYPREUS EDC. I will be stocking EDC's too since these are just too awesome. Building a new laser in it

Enjoy :beer:

 

[BowtieGuy]

Re: [Preview/Teaser]: The Cypreus - Custom Copper Host by Sinner

Sinner, you definitely know how to tease!
Wow,1lb. of copper! :drool:

 

[TheDukeAnumber1]

Re: [Preview/Teaser]: The Cypreus - Custom Copper Host by Sinner

Holy cow, good thing I'm wearing baggy pants. Sinner because of you I'm realizing I have a huge weakness for the all copper hosts. GJ

 

[Smeerworst]

Re: [Preview/Teaser]: The Cypreus - Custom Copper Host by Sinner

3 words:

Very very Nice :bowdown:

 

[grainde]

Re: [Preview/Teaser]: The Cypreus - Custom Copper Host by Sinner

Ha, I knew the time of copper had begun! Great work as always! :beer:

 

[DJNY]

Re: [Preview/Teaser]: The Cypreus - Custom Copper Host by Sinner

Where is the TITANIUM version

 

[BowtieGuy]

Re: [Preview/Teaser]: The Cypreus - Custom Copper Host by Sinner

Yes! I could go for that; maybe a copper/titanium bi-metal host.

 

[Lotus_Darkrose]

Re: [Preview/Teaser]: The Cypreus - Custom Copper Host by Sinner

These look so awesome. Any chance of doing a run of 1x cr123/16340 mini hosts in either copper or aluminum that fit a full aixiz module?

 

[IsaacT]

Re: [Preview/Teaser]: The Cypreus - Custom Copper Host by Sinner

What diode should I put in the first Cyprus host? I am excited!

 

[DJNY]

Re: [Preview/Teaser]: The Cypreus - Custom Copper Host by Sinner

What diode should I put in the first Cyprus host? I am excited!

Maybe one of these?
Thorlabs - HL6750MG 685 nm, 50 mW, Ø5.6 mm, C Pin Code, Opnext Laser Diode

Thorlabs - HL6738MG 690 nm, 30 mW, Ø5.6 mm, C Pin Code, Hitachi Laser Diode

Lazeerer tested the 685nm doing good +100mW (iirc)
It´s a very nice rubin color if you haven´t seen it before

You might also find one for a better price than thorlabs is selling it

 

[sinner]

Re: [Preview/Teaser]: The Cypreus - Custom Copper Host by Sinner

Sinner, you definitely know how to tease!
Wow,1lb. of copper! :drool:

Holy cow, good thing I'm wearing baggy pants. Sinner because of you I'm realizing I have a huge weakness for the all copper hosts. GJ

3 words:
Very very Nice :bowdown:

Ha, I knew the time of copper had begun! Great work as always! :beer:

I am to tease, I mean please. :eg:
I loved how they turned out kind of rose-gold freshly baked copper look it is just amazing. Thank you all for the kind words :beer:

Where is the TITANIUM version

Yes! I could go for that; maybe a copper/titanium bi-metal host.

I made 2 titanium versions with copper inlays just before this host was finalized, Jmillerdoc has one and he's already wanting the other one that I made for my new builds. His review thread for the Ti-Cu hybrid Cypreus will be up soon.

These look so awesome. Any chance of doing a run of 1x cr123/16340 mini hosts in either copper or aluminum that fit a full aixiz module?

I do plan on making the all copper series in all sizes and battery configs, I'll definitely do that next. :beer:

What diode should I put in the first Cyprus host? I am excited!

Maybe one of these?
Thorlabs - HL6750MG 685 nm, 50 mW, Ø5.6 mm, C Pin Code, Opnext Laser Diode

Thorlabs - HL6738MG 690 nm, 30 mW, Ø5.6 mm, C Pin Code, Hitachi Laser Diode

Lazeerer tested the 685nm doing good +100mW (iirc)
It´s a very nice rubin color if you haven´t seen it before

You might also find one for a better price than thorlabs is selling it

Why not the new 1w 520 this host is just perfect for it.

 

[Werty930]

Re: [Preview/Teaser]: The Cypreus - Custom Copper Host by Sinner

Ohh man I want to buy! One soooo bad!

 

[crazyspaz]

Re: [Preview/Teaser]: The Cypreus - Custom Copper Host by Sinner

DAMN those look nice. Any way to clear coat them or something to preserve the shine of the copper? It wouldn't be as enticing if it was dull :/

 

[IsaacT]

Re: [Preview/Teaser]: The Cypreus - Custom Copper Host by Sinner

I wish I had anywhere near 720 bucks to drop on a 1W 520. Alas, its not to be

 

[DJNY]

Re: [Preview/Teaser]: The Cypreus - Custom Copper Host by Sinner

Why not the new 1w 520 this host is just perfect for it.

Cause 1W 520nm is expensive, 685nm not

685nm is the most underrated wavelength imo :beer:

 

[gismo]

Re: [Preview/Teaser]: The Cypreus - Custom Copper Host by Sinner

sinner is the laser design magician even David Copperfield can envy. Seriously now, pure copper host would match rather redder wavelength IMHO. Then again it'd be up to the builder which colour to choose and present it to the forum.

Splendid work, Mr. sinner!