Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Payments Stage | GB | New CNC Machined Custom Designed Host for $18

Re: Feeler | New CNC Machined Custom Designed Host for $18

crazyspaz said:
Oh, so this is basically like how kryton grooves were made? Cool. At this cheap of a price I am sure I could be persuaded to buy one or two :whistle:

Especially if we could get some of that sick "oil spill" anodizing that Ehgemus does...Maybe i would have to get that taken care of personally.

Also make sure the company making these doesn't add a clear layer of anodizing to everything like what happened with the grooves...
Click to expand...

Way ahead of you. There won't be anything sprayed on the threads or in any way to keep the host from conducting electricity.
 





Re: Feeler | New CNC Machined Custom Designed Host for $18

I'm in for 2. Copper heatsink.

Do they come with a battery contact board?

Also I would make the fins on the head part cut as deep as possible and see if adding more toward the top would add anything to the cost. This would enhance the cooling ability.
 
Re: Feeler | New CNC Machined Custom Designed Host for $18

Rifter, yes, they come with a contact board. If you want it installed and two wires to just solder the diver in a module to it is $2.00 each. Check the spreadsheet, you are on it. :thanks:
 
Last edited:
Re: Feeler | New CNC Machined Custom Designed Host for $18

paul1598419 said:
Rifter, yes, they come with a contact board. If you want it installed and two wires to just solder the diver in a module to it is $2.00 each. Check the spreadsheet, you are on it. :thanks:
Click to expand...

No need to install them I can handle that.

I hope this group buy goes as smoothly as the last one, thanks guys for organizing this.
 
Re: Feeler | New CNC Machined Custom Designed Host for $18

Rifter, thank you. Please spread the word. We really want this to do as well as the last one too.
 
Re: Feeler | New CNC Machined Custom Designed Host for $18

Thanks Everyone ! :)

I will updated the OP about contact boards and leads.

Contact board will be free of charge as said by Paul.

No anodizing will be applied on this host. I have made a lot of parts with this specific factory. They made my Arcane 2.0 host and all of my 501B heatsinks.

Paint can be applied to the host. These paints are auto type paints , which are used to paint cars , aircraft and boats.

:beer:
 
Re: Feeler | New CNC Machined Custom Designed Host for $18

What you're calling copper heatsink is the entire head or just some internal part?

Also - how much would it weight with and without the copper HS?
 
Last edited:
Re: Feeler | New CNC Machined Custom Designed Host for $18

I'll take 1 Cu heat sink host with a contact board (for now)
 
Re: Feeler | New CNC Machined Custom Designed Host for $18

Atomicrox, we don't have a name for it yet. I can't tell you the mass of the different parts because there isn't a prototype, so the head is all copper if you choose that option.

SN P, I will add you to spreadsheet in a few minutes. When you said you want a contact board, are you asking that it be installed for you? The reason I ask is that they come with a contact board at no extra charge, but if you want it installed it will cost you an additional $2.00 per host for that option. :) Paul
 
Last edited:
Re: Feeler | New CNC Machined Custom Designed Host for $18

Joker, you may not be able to answer this without contacting the machinists, but- is matte black a possibility, as well as a polished finish?
 
Re: Feeler | New CNC Machined Custom Designed Host for $18

paul1598419 said:
When you said you want a contact board, are you asking that it be installed for you? The reason I ask is that they come with a contact board at no extra charge, but if you want it installed it will cost you an additional $2.00 per host for that option. :) Paul
Click to expand...

Oh, I didn't realise that they came with contact boards at no extra charge. If that is the case then my order would be a normal one without the installation.
:thanks:
 
Re: Feeler | New CNC Machined Custom Designed Host for $18

crazyspaz, yeah, it is more than possible. These will be painted at Eitan's father's paint shop with Auto-body paint. It can be metal flake or matte finished, no problem.
 
Re: Feeler | New CNC Machined Custom Designed Host for $18

Thanks, will there be an extra charge for the paint job?

Maybe we could get pnly the head painted, copper would tarnish very quickly if left uncoated :(
 
Re: Feeler | New CNC Machined Custom Designed Host for $18

I'm afraid there will be a charge for the painting option,. but it won't be much IIRC. I'll ask thejoker301 for the exact price. I am personally going to keep my host unpainted. It may be a little extra work to polish it from time to time, but I like the look of copper. If I had my way I would electroplate it with gold. I have a Cyprus II that I am leaving just the way it is. If you polish it with a reducing agent, it isn't much trouble.
 
Re: Feeler | New CNC Machined Custom Designed Host for $18

Yea, paint prices would be nice. Joker, when are you going to have pics of the matte black arcane posted? So we have something to compare what it will look like
 
Re: Feeler | New CNC Machined Custom Designed Host for $18

Hi Everyone :)

Paint prices :

* Black matte / White matte - $5
* Mirror Polished option - $10

I got a lot of pictures of our paints. Check this Arcane 2.0 Matte black coated for example : http://www.sflasers.us/Arcane_20_520nm/p2035127_12748261.aspx

I now also painted one in white for a customer of mine. I can take some pics of the white coating.

About clear coating the copper , I can check that with my father when he comes back.

I can calculate the exact mass of the host with the software :

* Cu Head Host - 244g
* Al Head Host - 135g

The Aluminium heatsink weight is 47g while a common 501B heatsink weigh 34g.

So even the Al heatsink is better than the 501B one.

The Copper heatsink weigh 156g alone.

I really think for the price of $18 this is a very good host. Again , if anyone has ideas that we can use / add / edit the host with ... please feel free to post them here :beer:
 
You must log in or register to reply here.


Back
Top