Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

NUBM44/4.5ASXD/G2 Full copper Mag Light for Sale

Joined
Dec 15, 2014
Messages
6,775
Points
113
Hi Folks, :thanks::sold:
I just built this awesome NUBM44 /4.5A SXD/G2 With a full copper heat sink and also a copper focus adapter. The tail cap is machined so you can fit the 32650's or the 26650's nicely. The SXD driver is heat sinked to the main sink, Switch is modded with 24AWG silicon wire. The copper sink disperses the heat from the 44 diode great. $ 245.00 shipped 2-Day priority mail. PM or Email is fine.

Rich:)
 

Attachments

  • IMG_2768.JPG
    IMG_2768.JPG
    241.3 KB · Views: 143
  • IMG_2770.JPG
    IMG_2770.JPG
    216.3 KB · Views: 136
  • IMG_2769.JPG
    IMG_2769.JPG
    178.7 KB · Views: 122
  • IMG_2927.JPG
    IMG_2927.JPG
    147.3 KB · Views: 166
  • IMG_2928.JPG
    IMG_2928.JPG
    158 KB · Views: 135
  • IMG_2930.JPG
    IMG_2930.JPG
    191 KB · Views: 122
  • IMG_2931.JPG
    IMG_2931.JPG
    200.3 KB · Views: 145
  • IMG_2933.JPG
    IMG_2933.JPG
    137.8 KB · Views: 110
Last edited:





Joined
Dec 15, 2014
Messages
6,775
Points
113
Hi,
Thank you Acc, Nice weight due to the copper sink . No the affordable material comes close, even though copper is pricey when purchased. Bit when it's finished wow, and after polishing sweet. brass polished shines like gold but used for focus adapters only.

Rich:)
 
Joined
Jan 29, 2014
Messages
12,031
Points
113
Stupid this has stayed listed so long, no where can you get this kind of pointer with that diode for such little money. I already have a NUBM44 pointer I like, but I am still drooling over this one.
 

GSS

0
Joined
Apr 28, 2015
Messages
5,053
Points
113
Lifetime, with these prices it easily leaves room for someone to get a heck of a good pair of safety glasses. To the point of no excuse if they don't:tsk:
 
Last edited:
Joined
Jan 29, 2014
Messages
12,031
Points
113
I've just PM'd him asking if he can mod this for me with deeper fins.
 

GSS

0
Joined
Apr 28, 2015
Messages
5,053
Points
113
I've just PM'd him asking if he can mod this for me with deeper fins.
Yike's as the module is all thermal pasted and driver glued.:thinking:
but he builds them so frequent now, I wouldn't see why not a new one wouldn't be made quick to order:)
 
Joined
Jan 29, 2014
Messages
12,031
Points
113
Perhaps, maybe the unit can be put on the lathe as it is anyway. We can research the possibilities, if not, maybe he can make something more suited for me later. I'd like to figure out how to make a beam expander to fit on the front of it with a big PCX lens as wide as the head is, so maybe better to make another one. I don't care about beam correction to square up the beam shape nearly as much as I want fairly low divergence. So, for my cares fat beams are fine, that is the price you pay for low divergence with that diode.
 
Last edited:
Joined
Dec 15, 2014
Messages
6,775
Points
113
Hi Guys Thank you i try to keep the cost down but that determines the price of material at the time of purchase it fluctuates the market. I buy material like others do and pay the price my hands are tied. So if you see one at one price and then another a little higher well now you know. And considering the time it takes to machine it and thee tooling . This one is under priced but the cats out of the bag so my loss. Alaskan i replied to you PM You can Email me also i check my mail more than here and i can also send you pics of a another one you my like . Remember Ed Crouse Mace of Doom well this one is like that with an AL sink and copper core but in a Mag Light. Its a plug n play.
Also thank you GSS for the bumping words sometime the profit i make isn't worth the time and material on the lathe . But i enjoy machining its quality time in the shop for me. I still get some senior moments some times LOL !!

Rich:)
 

BowtieGuy

0
LPF Site Supporter
Joined
Oct 14, 2012
Messages
6,090
Points
113
Stupid this has stayed listed so long, no where can you get this kind of pointer with that diode for such little money. I already have a NUBM44 pointer I like, but I am still drooling over this one.


That's one sweet looking build Lifetime, good job man! :beer:
I agree with Alaskan, great laser, and a good price, I bet it'll get snatched up real quick, this one is worth drooling over. :yh:
:gj:
 
Joined
Jan 29, 2014
Messages
12,031
Points
113
Yes, for that price, it isn't worth your time. I'd like to see that other one you mentioned like the Mace of Doom, if you would send me a photo, or a link to it. We can work on a custom pointer if that isn't something I want.

Thanks.

Edit: Found it,


free photo hosting

What is the price for that one? No diode, correct?
 
Last edited:
  • Like
Reactions: GSS
Joined
Dec 15, 2014
Messages
6,775
Points
113
Hi Ok here are some better pics of the build
 

Attachments

  • IMG_2524.JPG
    IMG_2524.JPG
    180.3 KB · Views: 62
  • IMG_2526.JPG
    IMG_2526.JPG
    204.5 KB · Views: 45
  • IMG_2525.JPG
    IMG_2525.JPG
    199.8 KB · Views: 66
  • IMG_2527.JPG
    IMG_2527.JPG
    191.2 KB · Views: 56
Last edited:

94Z28

2
Joined
Jul 1, 2016
Messages
539
Points
43
Rich, if you still have it this weekend I am probably going to take it. Will shoot you an email on Friday!
 
Last edited:




Top