Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

New purple gem :D

Joined
Jun 14, 2017
Messages
452
Points
63
Here’s an UltraFire C3 I bought from deal extreme several months ago. It arrived DOA. Waited 5 weeks for it too >(
What better than to turn it into a laser...Duh...
I’ve had a diode from a BDR-208bk for quite a while... Lifetime17’s heatsink was the final touch:)

THIS WAS A HARD BUILD because of the very compact area to work with. And soldering this very tiny Flexdrive was an experience. I set the driver to 500mA. Not sure of the output as I don’t have a LPM.
But it burns deliberately.

Hope you enjoy!!


SGD
 

Attachments

  • D57D7FDA-1038-4339-8D3E-B70DD6BD0A1C.jpeg
    D57D7FDA-1038-4339-8D3E-B70DD6BD0A1C.jpeg
    48.1 KB · Views: 75
  • 95DC9217-A29B-4B9B-B13F-D21C1F5F089D.jpeg
    95DC9217-A29B-4B9B-B13F-D21C1F5F089D.jpeg
    41.4 KB · Views: 75
  • CAFBFDD5-876A-46DC-B2DE-CD46F4911CF6.jpeg
    CAFBFDD5-876A-46DC-B2DE-CD46F4911CF6.jpeg
    44.7 KB · Views: 71
  • 22BFDB68-26B6-49E7-8C0F-701E8DED06B7.jpeg
    22BFDB68-26B6-49E7-8C0F-701E8DED06B7.jpeg
    41.8 KB · Views: 66
  • 531028DC-B68F-469B-AFAA-A7B94E69E13F.jpeg
    531028DC-B68F-469B-AFAA-A7B94E69E13F.jpeg
    33.1 KB · Views: 75
  • 3FE75ED3-4315-4085-96BD-4D8884F9472C.jpeg
    3FE75ED3-4315-4085-96BD-4D8884F9472C.jpeg
    37.2 KB · Views: 63
  • 2040F640-5E8B-4462-A429-95FA2F460221.jpeg
    2040F640-5E8B-4462-A429-95FA2F460221.jpeg
    26.8 KB · Views: 73
  • 9C4F10DE-D0A0-4CA9-AAF9-5783E3332B7A.jpeg
    9C4F10DE-D0A0-4CA9-AAF9-5783E3332B7A.jpeg
    84.1 KB · Views: 107
Last edited:





GSS

0
Joined
Apr 28, 2015
Messages
5,053
Points
113
Nice! Perfect little burner:)
I realize the need to insolate the driver and running at only 500mA but will it be a issue as far as keeping in heat?
 
Joined
Jun 14, 2017
Messages
452
Points
63
Nice! Perfect little burner:)
I realize the need to insolate the driver and running at only 500mA but will it be a issue as far as keeping in heat?

The diode has plenty of heatsink. 500mA is less that half of the driver’s ability and its adhered to the pill. Should be ok though I think:)
 

BowtieGuy

0
LPF Site Supporter
Joined
Oct 14, 2012
Messages
6,090
Points
113
That's a nice little EDC 405nm burner you've built, SGD! :beer:
It's nice to see the in-process pics, as everyone does things a bit differently.

Your last beam shot pic is looking good because in addition to the beautiful 405nm beam, I see green grass and leaves on the trees; I can't wait for spring to arrive here, we've had enough snow! :yh:
:gj: +rep asap!

PS - I like the obituary in your signature. It shows that although you've suffered a big loss, you're thoughtful enough to be an organ doner. ;):crackup:
 
Last edited:

BobMc

0
Joined
Apr 23, 2016
Messages
3,685
Points
113
Sorry your c3 was doa. But think you resurrected just fine.

Looks like a might fine build. Soldering onto these tiny little boards can be an exercise in patience. But it looks like you did a great job. Like the use of the shrink tube on the driver, interesting little twist. :gj:
 
Joined
Jun 14, 2017
Messages
452
Points
63
That's a nice little EDC 405nm burner you've built, SGD! :beer:
It's nice to see the in-process pics, as everyone does things a bit differently.

Your last beam shot pic is looking good because in addition to the beautiful 405nm beam, I see green grass and leaves on the trees; I can't wait for spring to arrive here, we've had enough snow! :yh:
:gj: +rep asap!

PS - I like the obituary in your signature. It shows that although you've suffered a big loss, you're thoughtful enough to be an organ doner. ;):crackup:

Sorry your c3 was doa. But think you resurrected just fine.

Looks like a might fine build. Soldering onto these tiny little boards can be an exercise in patience. But it looks like you did a great job. Like the use of the shrink tube on the driver, interesting little twist. :gj:

Thx, fellrs!! It’s a neat build for sure. The power is quite elusive. This is my first 405nm.
Jeff, the shrubs stay green here. I don’t miss that kind of cold though :). Now, 48 at night feels freezing to me. Speaking of EDC, I’m waiting to see that streamlight you’re supposed to produce :D

Bob, yeah I wasnt too mad. Just threw it in the laser TTD pile. Thanks again!!
 
Joined
Dec 15, 2014
Messages
6,775
Points
113
Hi Shotgun
Nice build and a 405 to glad you heat sinks worked out for you buddy. I think that was the smallest sink I had ever machined . But the measurments had to be on spot . Nice build thread with the flex drivers I have two I didn’t use them yet

Rich:)
 
Joined
Sep 20, 2013
Messages
17,252
Points
113
Very nice review of this build, Josh. I'm always anxious when I see these high power SM diodes in a small build. I would be conscious of the run times as many of these diodes have died a premature death here. At least you didn't try to go for more than 500 mA as I doubt it would survive long. Thank you for sharing your build procedure with us. + rep. :yh:
 
Joined
Jun 14, 2017
Messages
452
Points
63
Hi Shotgun
Nice build and a 405 to glad you heat sinks worked out for you buddy. I think that was the smallest sink I had ever machined . But the measurments had to be on spot . Nice build thread with the flex drivers I have two I didn’t use them yet

Rich:)

Very nice review of this build, Josh. I'm always anxious when I see these high power SM diodes in a small build. I would be conscious of the run times as many of these diodes have died a premature death here. At least you didn't try to go for more than 500 mA as I doubt it would survive long. Thank you for sharing your build procedure with us. + rep. :yh:

Thanks, Rich!! The heatsinks fit and seem to be working out great! This is the larger of the two. I still have one more smaller one to go ;). This Flexdrive’s pot adjustments were very finite. Bridging the three micro size resistors
and adjusting the pot ever so slightly were the hardest parts of the build I think.

Thanks, Paul. This build helped put my wits at ease after the red diode nose dive :crackup: I’ve read much on these 405s and it seems 500mA is plenty for longevity. I’ll probably keep the cycles very short too.

Glad y’all enjoyed and Thx for the kudos too :D.

Josh :beer:
 
Last edited:
Joined
Sep 16, 2007
Messages
3,658
Points
113
It's satisfying to have all that power in a tiny device, isn't it? Nice work.
I've missed this wavelength. I'll have to add it to my collection again. The fluorescence makes it really fun.
 
Joined
Sep 20, 2013
Messages
17,252
Points
113
It's satisfying to have all that power in a tiny device, isn't it? Nice work.
I've missed this wavelength. I'll have to add it to my collection again. The fluorescence makes it really fun.

That's true. Nothing like having a blacklight laser. I have a few. Need to get some more. ;)
 
Joined
Jun 14, 2017
Messages
452
Points
63
It's satisfying to have all that power in a tiny device, isn't it? Nice work.
I've missed this wavelength. I'll have to add it to my collection again. The fluorescence makes it really fun.

That's true. Nothing like having a blacklight laser. I have a few. Need to get some more. ;)

Yes it is!! It’s a powerful little sucker that’s for sure. I don’t know the power output. So, I threw an approximation at it given what I’ve seen others post output-wise at 500mA. I wanna get my hands on one of the multimode 405s now.
 
Joined
May 9, 2015
Messages
1,181
Points
113
Here’s an UltraFire C3 I bought from deal extreme several months ago. It arrived DOA. Waited 5 weeks for it too >(
What better than to turn it into a laser...Duh...
I’ve had a diode from a BDR-208bk for quite a while... Lifetime17’s heatsink was the final touch:)

THIS WAS A HARD BUILD because of the very compact area to work with. And soldering this very tiny Flexdrive was an experience. I set the driver to 500mA. Not sure of the output as I don’t have a LPM.
But it burns deliberately.

Hope you enjoy!!


SGD
beautiful!!
plus rep as soon as it lets me :)
send it to me ill meter it for you!!
 
Joined
Jun 14, 2017
Messages
452
Points
63
beautiful!!
plus rep as soon as it lets me :)
send it to me ill meter it for you!!

Thx Richie! How’s OK? I almost got sent out there for a bit. But, they needed me here and are sending someone else... shucks.
I’d be tempted to take ya up on that kind offer if it weren’t across the pond. There’s extra scrutiny in customs :(. But thank you!!!


Nice collection you have there btw.

SGD
 
Joined
Feb 21, 2016
Messages
475
Points
0
very nice and pocket build,you could use a bit smaller wires(in thickness) as the current is small on 405nm builds and it would be easier to fit all the parts in the host. :beer:
 
Joined
Jun 14, 2017
Messages
452
Points
63
very nice and pocket build,you could use a bit smaller wires(in thickness) as the current is small on 405nm builds and it would be easier to fit all the parts in the host. :beer:

Thx DS
It’s funny you say that cause I thought the same while assembling. But I don’t have any of the small stuff.

Cheers :beer:
 




Top