Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

My Tiny Tiny 1watt RGV build

you can kind of see the mount in this pic

24102009861.jpg
 





You may already know this, but since the green beam is missing the mirrors you can rotate the round module inside the heatsink of the green laser by loosening the set screw on the bottom rear of the heatsink. This is an easy way to bring the beam up a bit, and will probably out it square on the mirrors.
 
dont worry there is a peice os alum to go under the green its just not there in those pics

but thanks for advice
 
I really like those "mounts" you have for the various optical elements, i take it you made those yourself.
 
dont expect any pics for at least a week due to my electronic problems keep grow
 
Verrry cooool Andy I hope to start mine soon. You have done a good job on the base plate and all the fixtures, Kudos man ! I would like to know where you got that replacement diode from ? keep up the good work !

Peace All...
 
just got one problem sorted so only one left now.

i need a new psu for my 20k scanners, if anyone has a spare one?

replacement diode? do you mean the 808? you can get em on ebay, i brought a 1watt 808. i plan on buying a new 50mw green from aixiz and putting the 1watt 808 in, ive been told i should see results of 100-150mw of green light
 
the laser has been dismantled and the alum board is at my metal place waiting for the case to be made
 
You must log in or register to reply here.


Back
Top