Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

My new 750mW Argon ION laser! :)

N

Norwegian

0
Joined
Mar 17, 2010
Messages
50
Points
0
Hi!

Finaly i have my dream laser!
Argon ION laser@750mW, I cant wait to fire it up! will post beamshoots later :)

I got it for free from a Norwegian scientist!!

Laser in my car:
24786_101645523204831_100000781519451_44852_8338118_n.jpg


Laserhead unpacked.
24786_101645633204820_100000781519451_44871_3344827_n.jpg

failure
It had some minor failures in the PSU, but I fixed it in 10 min. :) now I just have to learn how to operate the laser, I know dont' anything about Gas Lasers.... there are some mirror/laserpower adjustments that have to be done but other then that the laser is in good condition.
 
Last edited:





Sweet score! I personally don't know all that much about gas lasers but there are sure to
be plenty of other members coming by this thread soon to help you out.

BTW, Welcome to LPF!
 
Hey there,
Nice laser.
I have a similar laser but it's a Krypton Argon laser that also needs the occasional adjustments to the mirrors. Without a good alignment, there will be no beam.
It can be a fiddly process and there are a couple of ways of doing it, either trial and error and hoping the beam appears and then adjusting to get the brightest beam output. But the proper way is to monitor tube current while adjusting the mirrors. I have some documentation on the process. If you want, feel free to email me and I'll photocopy that part of my manual for adjusting mirrors.
Cheers,
Rob.
 
timelablasers said:
Hey there,
Nice laser.
I have a similar laser but it's a Krypton Argon laser that also needs the occasional adjustments to the mirrors. Without a good alignment, there will be no beam.
It can be a fiddly process and there are a couple of ways of doing it, either trial and error and hoping the beam appears and then adjusting to get the brightest beam output. But the proper way is to monitor tube current while adjusting the mirrors. I have some documentation on the process. If you want, feel free to email me and I'll photocopy that part of my manual for adjusting mirrors.
Cheers,
Rob.
Click to expand...

Thanx for the help by email.

Hope to try to start it up later tonight, I have tried it for some seconds and I can see that the gas is ionizing, guess that's a good sign! the laser have only 800 hours on the Hour-Meter! :) it's made to last 10.000hrs.

Anybody who know how much a laser in this class is worth in usd?
 
Typically that means the laser is out of alignment. You'll need to align it before you get any output. The fact that you have a violet dot means the discharge is being sustained, which is half the battle.
 
ElektroFreak said:
Typically that means the laser is out of alignment. You'll need to align it before you get any output. The fact that you have a violet dot means the discharge is being sustained, which is half the battle.
Click to expand...

aha! cool! I only know laser diodes and violet for me is IR :) since this is a gas laser I guess there is no IR to generate the beam.
 
Continuous Wave- as opposed to pulsed.

I've never heard of such a powerful single line before though, lets hope you can find a way to get this thing aligned and lasing!
 
Meatball said:
Continuous Wave- as opposed to pulsed.

I've never heard of such a powerful single line before though, lets hope you can find a way to get this thing aligned and lasing!
Click to expand...

25706_101674346535282_100000781519451_45468_1464105_n.jpg

The former owner said that it was measured to 650mW, and that was not on full power :)
This is the label
 
Moore images of the beast :)

Label:
25706_101674326535284_100000781519451_45463_6477200_n.jpg


Laser exit side:
25706_101674316535285_100000781519451_45461_3206563_n.jpg


Laser mirror side (what is the tap plug for? anybody know?)
25706_101674309868619_100000781519451_45460_5700225_n.jpg


Operating side:
25706_101674303201953_100000781519451_45459_2036752_n.jpg


Compared to 2cel LED maglite:
25706_101674296535287_100000781519451_45458_6561866_n.jpg


PSU(heavy!):
25706_101674289868621_100000781519451_45457_2563870_n.jpg


PSU label:
25706_101674273201956_100000781519451_45455_7370525_n.jpg


Laserhead compared to 2cell led maglite:
25706_101674266535290_100000781519451_45454_7943433_n.jpg
 
Meatball said:
Continuous Wave- as opposed to pulsed.

I've never heard of such a powerful single line before though, lets hope you can find a way to get this thing aligned and lasing!
Click to expand...

Since this is an ALC60x (or similar), 750mW is a number on a label.. In reality you'll only get 300mW if your VERY lucky. More realistic yet is 100-150mW.
 
You must log in or register to reply here.


Back
Top