- Joined
- Feb 4, 2011
- Messages
- 20
- Points
- 0
This is my first post here, i have read the rules but if i get something wrong please notify me.
So here it goes. A couple of weeks ago i decided to make my own bluray laser. I did my research and found that the "Must have" parts are the diode, the module and the diode driver otherwise you can't make a diode laser.
After that i bought a phr-803t since it is the most widely used diode from amateurs like me. Then i bought the driver and the module from o-like which seem to have great quality.
Here is the module and that is the driver.
Since most builds use an aixiz module i haven't been able to find information on how to fit the laser diode in the module nor how is the driver connected(i read that the + and - on the driver are not correct). So i came here in hope that someone who is experienced enough could show me how to put this all together.
And one last thing, i didn't forget to buy safety goggles. Safety first
So here it goes. A couple of weeks ago i decided to make my own bluray laser. I did my research and found that the "Must have" parts are the diode, the module and the diode driver otherwise you can't make a diode laser.
After that i bought a phr-803t since it is the most widely used diode from amateurs like me. Then i bought the driver and the module from o-like which seem to have great quality.
Here is the module and that is the driver.
Since most builds use an aixiz module i haven't been able to find information on how to fit the laser diode in the module nor how is the driver connected(i read that the + and - on the driver are not correct). So i came here in hope that someone who is experienced enough could show me how to put this all together.
And one last thing, i didn't forget to buy safety goggles. Safety first
Last edited: