Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

Lightsaber pointers= awesome case

rathat

0
Joined
Jul 21, 2008
Messages
145
Points
18
ThinkGeek :: Star Wars Lightsaber Laser Pointer
c5e6_star_wars_laser_pointers_close.jpg

c5e6_star_wars_laser_pointers.jpg
this would make an awesome case for a laser if its not to small
 





HAHA I was looking at these 2 weeks ago. If you can fit the front of an AixiZ in it you can throw in a LOC @ 150mWs. Just like Kens tiny burner build.
 
Last edited:
three button cells...that will have a long run time;) U will have to jayrob it.
 
This is so friggin cool! I have to get one of these. Hahaha
 
I almost bought them, but $15 is a big gamble if it doesn't work. Wait to Gordon replies.
 
we did somke reading and based on the diameter (battery type) this would not work. Is too skinny for an aixiz module.
 
we did somke reading and based on the diameter (battery type) this would not work. Is too skinny for an aixiz module.

There are smaller modules available. I believe the Laser4U (or something) module with the 405-G-1 lens is 10mm IIRC.
Aixiz also sells some tiny 8mm diameter modules.
 
You could prob machine the inside of the lightsaber and machine down an aixiz module to fit in there
 
You're always there to shine sunlight through the dark clouds that are my brain. :beer:

I placed a few of the small red modules that I got from Tyler in the Swap Box. If there are any left when it gets to you, those modules are 8MM and will hold a 5.6mm diode.

Peace,
dave
 
Hmm may have to build one of these lightsabers after all. Did you get them yet Gordo?
 


Back
Top