Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Lava Micro FlexDrive Driver (lavadrive2) fits pens

Status
Not open for further replies.
Re: Lava Micro FlexDrive Driver (lavadrive2) fits

hi i'm a noob with this kind of thing so don't hurt me

but can i can still use this version for the blu-ray laser totorial
in i-hacked

i read the manual i just want to make sure
 





Re: Lava Micro FlexDrive Driver (lavadrive2) fits

so whats the deal on bulk orders drlava?

any price breaks for 10 or 20?
 
Re: Lava Micro FlexDrive Driver (lavadrive2) fits

Hey lava i've used two of these drivers for blu-rays and they have been fantastic...

I was wondering what your thoughts are on using the lavadrive to drive a cree xp-e led at 700ma.
The forward voltage of said LED is 3.4V

thanks :)
 
Re: Lava Micro FlexDrive Driver (lavadrive2) fits

i have read a lots of things about new V4.. i have affraid that my soldering skills will be not enough to use this driver with success..

do you have V3 still available or they are not more available???

cheers
 
Re: Lava Micro FlexDrive Driver (lavadrive2) fits

Thanks, I recieved my flexidrives in the mail :)
 
Re: Lava Micro FlexDrive Driver (lavadrive2) fits

I recieved mine today and made a 6x Pocket Mini 8-)
Thanks Andrew!!!

P.S.
These new V4s are a pain to solder to... :-/
You need some nice soldering skills.
 
Re: Lava Micro FlexDrive Driver (lavadrive2) fits

Spyderz20x6 said:
I recieved mine today and made a 6x Pocket Mini 8-)
Thanks Andrew!!!

P.S.
These new V4s are a pain to solder to... :-/
You need some nice soldering skills.
Click to expand...

If it was easy we would have monkeys soldering them... ;D ;D ;D

Jerry
 
Re: Lava Micro FlexDrive Driver (lavadrive2) fits

lasersbee said:
[quote author=Spyderz20x6 link=1209418066/896#904 date=1236646759]I recieved mine today and made a 6x Pocket Mini 8-)
Thanks Andrew!!!

P.S.
These new V4s are a pain to solder to... :-/
You need some nice soldering skills.
Click to expand...

If it was easy we would have monkeys soldering them... ;D ;D ;D

Jerry[/quote]
Lol ;D
 
Re: Lava Micro FlexDrive Driver (lavadrive2) fits

I must say again how great these drivers are. They are sooooo small. They fit right into an aixiz module. These are perfect for pen lasers. Please don't switch back to the old drivers. If anything keep both in stock for those who have trouble with these ones.
 
Re: Lava Micro FlexDrive Driver (lavadrive2) fits

yobresal said:
I must say again how great these drivers are. They are sooooo small. They fit right into an aixiz module. These are perfect for pen lasers. Please don't switch back to the old drivers. If anything keep both in stock for those who have trouble with these ones.
Click to expand...
I agree.

I LOVE THESE NEW DRIVERS!!!
 
Re: Lava Micro FlexDrive Driver (lavadrive2) fits

I think I may have done something bad! I was thinking as I don't have any volt/ampere/anything/meter I would just turn the pot clockwise, (correct to increase mA?), until max, on the lowest level it would be to about 100mA (perfect for a PHR I thought), it seems like I can turn it forever? Is it just going around forever 65-100-65-100-65-100 mA ?
 
Re: Lava Micro FlexDrive Driver (lavadrive2) fits

Spoosh said:
I think I may have done something bad! I was thinking as I don't have any volt/ampere/anything/meter I would just turn the pot clockwise, (correct to increase mA?), until max, on the lowest level it would be to about 100mA (perfect for a PHR I thought), it seems like I can turn it forever? Is it just going around forever 65-100-65-100-65-100 mA ?
Click to expand...
Your not supposed to turn it forever!
It's not a mechanical knob that will stop once you have reached the max current.
You can break it like that.

It's called using common sense... ::)
 
Re: Lava Micro FlexDrive Driver (lavadrive2) fits

Spyderz20x6 said:
[quote author=Spoosh link=1209418066/896#909 date=1236714523]I think I may have done something bad! I was thinking as I don't have any volt/ampere/anything/meter I would just turn the pot clockwise, (correct to increase mA?), until max, on the lowest level it would be to about 100mA (perfect for a PHR I thought), it seems like I can turn it forever? Is it just going around forever 65-100-65-100-65-100 mA ?
Click to expand...
Your not supposed to turn it forever!
It's not a mechanical knob that will stop once you have reached the max current.
You can break it like that.

It's called using common sense... ::)[/quote]

Ok, I tried it and not broken, phew.

But say I have it on the 65-100mA range like now and I turn too much, what happens to the mA output? does the mA output max out at 100mA, just that the pot will still be able to turn and break, fysically?
 
Status
Not open for further replies.





Back
Top