Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

killed my first m-140

Sorry for your loss :( I also killed quite a few M-140's :( I belelieve like 5 or something danm stupid. I think i killed them in any possible way :p static electricity, not shorting the driver etc. But i was a noob in electronics when i started this hobby :)
 





I killed a M140 by falling it on the ground. I was holding it in my plier and suddenly the diode snap out and onto the ground. The glass windows was intact but the impact has damaged the innards.
 
well considering i've been in the hobby for about 9-10 months with no issues i'd say i'm doing quite well. :p
 
HitShane said:
. I also clean the window and lens before each use. I have taken many pictures of raw output and unfocused... When I notice my 2W start to degrade I will post about it...
-Shane
Click to expand...

trust me shane, leave the lens on and touch that window as little as possible. once clean, and with the lens screwed in, the window won't get dirty. every time you expose that window you're asking for trouble imo
 
RedDart said:
I wonder what general output I'll reach at 1,35A with an M140
Click to expand...
-_- These posts are starting to annoy me.. It depends on the efficiency of the diode you receive.. The only way of telling is by measuring it with a calibrated Laser Power Meter..
 
Last edited:
Billiam said:
-_- These posts are starting to annoy me.. It depends on the efficiency of the diode you receive.. The only way of telling is by measuring it with a calibrated Laser Power Meter..
Click to expand...

I obviously don't have one.

There's a chart stating the power with a G-2 lens, so I wondered if there was one for a 3 element lens
 
Last edited:
RedDart said:
I obviously don't have one.

There's a chart stating the power with a G-2 lens, so I wondered if there was one for a 3 element lens
Click to expand...

Subtract ~15%

Of course, even that is virtually meaningless with regard to a particular diode

A general average of outputs says nothing about any one diode except that it will "probably" fall **somewhere** in that range

Peace,
dave
 
Last edited:
You must log in or register to reply here.


Back
Top