`jetlasers gb #4 is now CLOSED our $$ is in China

[CDHDC]

Saaaweeeet!!! I can't wait

 

[hakzaw1]

Remember, this laser is going to cost you money.

^^ DJNY wrote in reply to trever22(now banned) and his trolling my thread and conning several here(thus the perma ban(i hope))

good riddence!

DLMB has not had the best luck the post few yrs and the last thing he needed was a scam of his $$.
Good luck in the future Dustin.

***********************************
here are the metering shots for madog's Pl-C 532/600

and Corbins (CDHDC) Pl-C 532/500

you wont see my PL-C 532/400 cause it wasnt done- so much for me getting special treatmernt from JETL--boo hoo :-( he can make nice on my PL-G cost.

these were done several time with mostly very little change ( once I changed batteries in my meter and one of the lasers, Both in perfect shape- foucs is set nicely amd moves smoothly with not too much turning (some of the first PL-C were too stiff and one was too loose but Gray has always made things right aand quickly.

I am doing some outdoor pics in a bit but wont post them til Sat

see combined 1.75W+ of JETL 532. and >3 watts of all nms in last shot.

I ask that all put on thier glasses before enlarging my thumbnails. They both BTW burnt many new scars around the front of my meters and I HAD to wear my glasses= Instaburners.

BE CAREFUL GUYS

keep these stored w/ batt out and keys elsewhere.

you both get free batteries- go eat some cereal.

hak

 

[CDHDC]

Awesome! I can't wait for it to show up:drool: I'm patiently waiting in the front window with my dog for the delivery man to show up. Wait, what's that!? Oh never mind. It was just the neighbor driving by

 

[hakzaw1]

some gratitous nite shots -very poor ones too.

well after 2:30 am still about 80 degrees -very humid and tons of mosquitos.

The green to the right is Madogs 600/532 next is Corbins 500/532 and the one on the left is my 300/532. All JETLASERS.

the 445s are DTR built 800 and 500 mWs. The red is barely visable once the camera adjusts to the Green and Blue. but it is 348mWs of PL-C JETL 660nm/250.

It was a very clear night -no fog or dust in the air.

I will try again with some other lasers-the 600 and 500 are on the way to the new homes--ENJOY!!

My not-so-hot DIY Beam Expander is on Madogs 600-its a bit top heavy and takes two hands to handle-(a whopper) the 'throw' shot is off my new mobile laser lab.

 

[madog]

PP sent. Thanks for everything Hak!

 

[madog]

Damn Sundays and holidays!

 

[CDHDC]

Nothing like checking your tracking number first thing in the morning to see that it is out for delivery, only to not have your package show up. Ughhhh:cryyy:

 

[Jollyrajer73]

So when is GB#5 Im in for a 600mW/532nm hopfully if i can afford it at the time

 

[DJNY]

Do we have a GB price on the Ti-B and the PL-D yet?

Thanks.

 

[Whodunit13579]

Any update on my Ti unit?

 

[hakzaw1]

^^^ yes- sending you the Tracking number now- finally- last two units for this GB- yours and mine!

Feeler thread is started(not my idea--lol) for JETLASERS GB#5.

 

[hakzaw1]

The last two units from this GB arrived today- it took longer than usual but I would much rather wait and get good lasers.

Here are the metering pics for Andrews Ti Pen.
It came with an extension tube that allows the use of aaa primaries , however at 3.0vdc they do not keep up with a 4.2 vdc 10440. I did not have new AAAs so my test for them is not accurate and I will wait allow Andrew to do a proper review when he gets his laser in hand.

Ti pen,250nm/200mWs-- w/ keys-momentary side clicky.
Highest peak was higher than pic show- (one hand on clicky and the other on my camera- didnot catch the peak of 235mWs) For a one minute test the power never dropped below 210mWs.

 

[DJNY]

Nice Len!

Do we have Ti-B and PL-D prices yet?

 

[hakzaw1]

Nothing new to report.Subscribe to the feeler thread ofr GB#5 as it will turn into the GB thread after we let it run a while. Not sense doing a GB for less than 10 takers.

and I think you mean the new PL-G or is there a D as well.

I think the problem as I understand it -the Ti series cost a lot to have made Especially the first one. So JETL is wanting to stock the favs so as to not have to have a large inventory of choices. They really something - in your hand it feels like some kind of jewelry I have two and have sold and inspected several more.

Many have aleady gotten PL-C lasers from JETL but I am not sure alll have seen this. There have been some changes for the good since this came out and also a new pin for the tailcap that looks much nicer. The returned PL-C 405 are 500s and now nicely overspec at 600mWs and I have one new FS as well as new Pl-C 250/532. PM for moar details.

Aryntha has 10 days to claim his new 500/532 PL-C 700+mWs or it goes up FS then.

 

[DJNY]

and I think you mean the new PL-G or is there a D as well.

I ment these two:

¤Jetlasers B Ti Laser Pointers with Waterproof Focusable Features at Jet Lasers, the world's only Titanium laser pointers

Best deals! Buy Jetlasers 250mw to 700mw 532nm green Laser Pointers, portable green laser 532nm 700mw, handheld 600mw 532nm green laser pointers, portable green laser blue 500mw, 200mw 635nm red lasers jetlasers. JETLASERS.ORG

 

[mikzip]

Now i finally got all the things i ordered in this GB. :san:
Had to wait long to get it all.
Will just share how outstanding Gray has been with me.

I received my 1000mv blue and 600mv green along with a 10xBE about august 15.
I started out frying the Green by mistake putting in the batteries from the blue :yabbem:
I sent it back to china to get it fixed, expected to pay for repair, but he never charged me for the trouble and even sent it back free of charge . It was ready in a week or so after he received it, but I choose to wait for the red 635nm, 400mv I had set my eyes on as well.

Just received the repaired green and the red yesterday.
The green seems very stable ad peaks at nearly 700mv.
The red also stable and peaks about 425, but really bad divergence, worse than anticipated, makes a square about a meter wide on about 100 meter, so not a pointer but a nice and visibly beam.
My Blue in pl-d host I rarely use because it takes me several minutes to turn it on.
It peaks just a little over 1000.

I haven't been playing with the BE yet, but got adapters for all 3 so I can have them permanently in place.

Will hopefully soon be writing some reviews, sorry for the long post
All pover testing was done with the supplied batteries. :beer: