How to extract diode and Optics from 4X GBW-H10N

[BluRay]

Re: How to extract diode and Optics from 4X GBW-H1

Its my pleasure Glenn. Did you managed to get those optics from the phr sleds?






Tommy

 

[robjdixon]

Re: How to extract diode and Optics from 4X GBW-H1

I have put it into my compilations page
Nice one

 

[BluRay]

Re: How to extract diode and Optics from 4X GBW-H1

thanks Rob, i appreciate it.




Tommy

 

[viroy]

Re: How to extract diode and Optics from 4X GBW-H1

Has anyone made a good testing thread on the 4x GBWH10N?
What is the highest stable ma you guys have run these at ?

 

[phoenix77]

Re: How to extract diode and Optics from 4X GBW-H1

When I've removed any of the optics from a sled of ANY kind, I always push them out from the back side with, of all things, a chop-stick from a Chinese restaurant. Since it's made of wood, you don't risk scratching or cracking or chipping any of the optics. They are also tapered enough that they fit in all of the holes behind the optics. If done this way, you don't even have to remove very many screws, 1 or 2 at most. Just pry or push the optics out. I remove the magnets with a small set of needlenosed pliers Just my $.02

 

[sk8er4514]

Re: How to extract diode and Optics from 6x GGW-H2

you should finish this by adding how to get the diodes out of the heat sinks! good write up though!

Second to this comment.

Nice write up BluRay, thanks for the info. well put together and presented

-Kendall

 

[Ieon]

Re: How to extract diode and Optics from 4X GBW-H1

This needs a bump.

So I shall feed it a bump.

Great thread Blu-ray.

Really helped me ;D

 

[lasersbee]

Re: How to extract diode and Optics from 4X GBW-H1

This needs a bump.

So I shall feed it a bump.

Great thread Blu-ray.

Really helped me  ;D

I see you are back.... "Ieon"= "AusLasersSuck"...

Jerry

 

[jander6442]

Re: How to extract diode and Optics from 6x GGW-H2

Really nice write up with great pictures and notes!

You should show this link to robjdixion so he can put it in his compiled list of tutorials which is stickied in this tutorials and help section:
http://www.laserpointerforums.com/forums/YaBB.pl?num=1225049614/0

One thing you should probably do in order to avoid confusion, is perhaps edit the first post to say GBW-H10N. This is the 4X sled that Amk is getting. (he is not getting the GGW-H20L) which is the way more expensive 6X sled...
Jay

Great write up very detailed but alas, I as well, was confused at fist in relation to the sleds 4x vs 6x.
but still very nice should be placed with the tutorials maybe wait untill your done with the PHR write up

 

[Tech_Junkie]

Re: How to extract diode and Optics from 6x GGW-H2

I as well, was confused at fist

No big surprise there. Try the other fist. Maybe you can pretend its a real person. ;D

 

[XCreedX]

Hey bluray which one is the red and which one is ir both of your pics are different, on says red LCC is the center with a exhaust manifold shape sink and in the other picture u say thats the ir diode?