Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

GB: PL520 murder fund

Thanks for the pictures offroad :)

I sent Daguin diode #1 for decanning, I still have diode #2 for the killing test.
 





80mW 520 left

90mW 532nm right


5JakffA.jpg


XFQKnOd.jpg


pEsLzt1.jpg


x1RqjP9.jpg



Last shot:
532nm left 90mW
520nm right 80mW
Gh2DTxM.jpg
 
Last edited:
  • Like
Reactions: ARG
Wow, you camera made the colors look perfect! That's almost exactly how the two different wavelengths appeared.
 
ARGLaser said:
Wow, you camera made the colors look perfect! That's almost exactly how the two different wavelengths appeared.
Click to expand...

Another one :)

thnx ARG :beer:

100mW 473
80mW 520 (ty offroad :) )
90mW 532


Notice the slight bluish hue in the middle of the 520 :)

pnTZqMr.jpg
 
Last edited:
So I am contemplating making a gun sight using a 520nm... you didn't do a shake or drop test did you?
 
Okay. Dropped it from a height of 4 meters three times.

Similar output, and no physical damage that I can see, diode window is still intact.
 
ARGLaser said:
Okay. Dropped it from a height of 4 meters three times.

Similar output, and no physical damage that I can see, diode window is still intact.
Click to expand...

that is promising thank you! it is hard to swallow the thought of abusing a $140 diode but i might just do it. I just got a glock 35 gen 4 and an RRA AR15 so I was thinking I already have a spare x-boost mini for it so why not :) I have modified red ones already to fit the 532nm modules but they don't work in the cold and a pretty large to try to cram in a small package.

that might also take a little stress of people when using it if they no they can accidently drop it and the odds of it dying are low.
 
It depends on the surface it falls. I have ceramic tiles on my floor. A 445nm M140 rolls of the table and was LED from only 80cm. :(
 
Maybe jay can make some hexagon hosts instead of just sinks... ;)
 
Blord said:
It depends on the surface it falls. I have ceramic tiles on my floor. A 445nm M140 rolls of the table and was LED from only 80cm. :(
Click to expand...

It landed on a cinderblock I placed for the target. :)
 
Arg do you still have one of these diodes you are willing to torture. This might be a little overboard but I was wondering about what wavelength and power it would output if it was in liquid nitrogen lol.

I saw this with an led

then this weeba2kv posted in a thread
 
Where do I find liquid nitrogen?

I still have one diode, the other was sent to Dave for decanning then to Blord for the macros
 
Last edited:
Wouldn't you be able to get a similar effect if you used a large pelteir(TEC) unit? AFAIK those things can get pretty damn cold if you give them good enough cooling. Hook a large 200W unit up to a CPU water cooling block and you should be able to get that thing pretty damn cold. Plus the rig would be safe and highly reusable.
 
Last edited:
You must log in or register to reply here.


Back
Top