Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



FS: Sold

jnrpop

Well-known member
Joined
Dec 7, 2008
Messages
663
Points
63
SOLD

Hi members,
Up for grabs is a full "drop-in" host, ideally for a high power diode :D plug & play :beer:

Details as follows:
- Lifetime17 23mm 510 copper mech-mod adapter :drool:

- 22mm Stainless steel Mech-mod body, bottom push on/off button (1x 18650 or 2x 16340 cells)

- 510 Platic "Derlin" Isolation spacer, screws on to the head and 510 adpater, for use with the case positive 505nm diodes if required

- 12mm Copper 5.6mm diode module with half copper back

- Lifetime17 copper focus adapter, plastic lens

- Custom wiring harness, 22awg silicone wire, creating a "case neutral" setup, Batt + to the front/top

Price: $55 SOLD
Payment: Paypal f&f, or +3% for normal paypal payment
Location: Germany, EU
Postage: International $10usd with tracking
Carrier: Deutsche post (7-9 business days)

Thanks everyone :beer:









And with the Plastic Derlin Spacer, creating an isolated Copper head for a case positive diode :beer:
 

Attachments

Last edited:



paul1598419

Well-known member
Joined
Sep 20, 2013
Messages
15,520
Points
113
Re: FS: Mech-mod drop in Host - Copper & S/S

That's nice, Corey. Was any of that part of the package I sent you? I was relieved to see it got to you without issues. Good luck on your sale, buddy. :D
 

Fruits

New member
Joined
Jan 13, 2018
Messages
20
Points
0
Re: FS: Mech-mod drop in Host - Copper & S/S

This is amazing, was looking at mech-mods earlier. Will keep you posted if I commit to the purchase. Good luck with sale.
 

Lifetime17

Well-known member
LPF Site Supporter
Joined
Dec 15, 2014
Messages
5,320
Points
113
Re: FS: Mech-mod drop in Host - Copper & S/S

Hi J,
Glad to see your using the Delrin machined isolating spacer for the copper sink. Should be a go with the case POS+ diodes, I was wondering when you were going to put the two together.
Good luck with the sale buddy looks great .

Rich:)
 

jnrpop

Well-known member
Joined
Dec 7, 2008
Messages
663
Points
63
Re: FS: Mech-mod drop in Host - Copper & S/S

That's nice, Corey. Was any of that part of the package I sent you? I was relieved to see it got to you without issues. Good luck on your sale, buddy. :D
Indeed so Paul, I've build one into an Isolated adapter for my <505 case positive diode, very happy with it. No need for a second unit so im happy to pass it on :beer:

This is amazing, was looking at mech-mods earlier. Will keep you posted if I commit to the purchase. Good luck with sale.
Thanks Fruits,

Hi J,
Glad to see your using the Delrin machined isolating spacer for the copper sink. Should be a go with the case POS+ diodes, I was wondering when you were going to put the two together.
Good luck with the sale buddy looks great .

Rich:)
Hi Rich,
The first unit's been built for some time now, the idea worked great for my case+ <505 diode. Very happy with it, and no need to use the blitzbuck, you can use any driver with this isolated adapter, im using an Omni at 220mA. And you get full heatsinking capability, no need to isolate the little 12mm module :)

I have no need for the second unit, although its such a beautiful copper 510 adapter, built by you so workmanship is 100% :beer:

Thanks Rich!
 
Last edited:

jnrpop

Well-known member
Joined
Dec 7, 2008
Messages
663
Points
63
Sold pending payment :beer:
 
Last edited:

BobMc

Well-known member
Joined
Apr 23, 2016
Messages
3,810
Points
113
That was quick. Congratulations on your sale. :)
 
Last edited:

Alaskan

Well-known member
LPF Site Supporter
Joined
Jan 29, 2014
Messages
11,346
Points
113
Damn! That did go quick, hardly giving anyone else a shot at it :p
 

Lifetime17

Well-known member
LPF Site Supporter
Joined
Dec 15, 2014
Messages
5,320
Points
113
Hi J, Thats great to hear I use the Delrin material to make different spacers for the builds . Its a little tricky to work with though, but strong enough . Glad it sold fast buddy.

Rich:)
 

jnrpop

Well-known member
Joined
Dec 7, 2008
Messages
663
Points
63
Hi J, Thats great to hear I use the Delrin material to make different spacers for the builds . Its a little tricky to work with though, but strong enough . Glad it sold fast buddy.

Rich:)
I could imagine Rich, its a great material, very strong.
Your an asset to the community rich and an all round great guy, thank YOU for making them :beer:
All the best for that N520 beauty in your sig too :drool:
 
Last edited:

Lifetime17

Well-known member
LPF Site Supporter
Joined
Dec 15, 2014
Messages
5,320
Points
113
Hi J,
Thank you the N520 S4X sale is still pending , Anyway I am glad this project worked out clean, The Delrin is a strong material I have some PTFE nylon bar but didn't try anything with it yet.
Just made an insert for the crenelated front of the S4X to hold a standard lens came out nice with the coated heat sink. A few pics buddy.
Rich:)
 

Attachments

BowtieGuy

Well-known member
LPF Site Supporter
Joined
Oct 14, 2012
Messages
5,789
Points
113
Congrats on your quick sale, that host is going to make someone a nice finished laser, hope to see it in a build thread soon! :yh:
 

jnrpop

Well-known member
Joined
Dec 7, 2008
Messages
663
Points
63
Congrats on your quick sale, that host is going to make someone a nice finished laser, hope to see it in a build thread soon! :yh:
Appreciate it Bowtie :beer:

Hi J,
Thank you the N520 S4X sale is still pending , Anyway I am glad this project worked out clean, The Delrin is a strong material I have some PTFE nylon bar but didn't try anything with it yet.
Just made an insert for the crenelated front of the S4X to hold a standard lens came out nice with the coated heat sink. A few pics buddy.
Rich:)
Rich, looks fantastic!
Hey another idea :) you could also create custom front plastic inserts for hosts, to fit larger diameter lens barrels for larger optics, instead of the standard M9, with a 6.35 lens, we could start going bigger for the MM diodes :D
 

Lifetime17

Well-known member
LPF Site Supporter
Joined
Dec 15, 2014
Messages
5,320
Points
113
Hi J,
Great idea that would be awesome to cut the divergence down on a diode like the 44. The insert I made is machined of AL in the pic .

Rich:)
 
Last edited:

jnrpop

Well-known member
Joined
Dec 7, 2008
Messages
663
Points
63
Hi J,
Great idea that would be awesome to cut the divergence down on a diode like the 44. The insert I made is machined of AL in the pic .

Rich:)
^^^ here we go......... :drool: :D :beer:
 







Top