FS: Sold

[jnrpop]

SOLD

Hi members,
Up for grabs is a full "drop-in" host, ideally for a high power diode plug & play :beer:

Details as follows:
- Lifetime17 23mm 510 copper mech-mod adapter :drool:

- 22mm Stainless steel Mech-mod body, bottom push on/off button (1x 18650 or 2x 16340 cells)

- 510 Platic "Derlin" Isolation spacer, screws on to the head and 510 adpater, for use with the case positive 505nm diodes if required

- 12mm Copper 5.6mm diode module with half copper back

- Lifetime17 copper focus adapter, plastic lens

- Custom wiring harness, 22awg silicone wire, creating a "case neutral" setup, Batt + to the front/top

Price: $55 SOLD
Payment: Paypal f&f, or +3% for normal paypal payment
Location: Germany, EU
Postage: International $10usd with tracking
Carrier: Deutsche post (7-9 business days)

Thanks everyone :beer:

And with the Plastic Derlin Spacer, creating an isolated Copper head for a case positive diode :beer:

 

[paul1598419]

Re: FS: Mech-mod drop in Host - Copper & S/S

That's nice, Corey. Was any of that part of the package I sent you? I was relieved to see it got to you without issues. Good luck on your sale, buddy.

 

[Fruits]

Re: FS: Mech-mod drop in Host - Copper & S/S

This is amazing, was looking at mech-mods earlier. Will keep you posted if I commit to the purchase. Good luck with sale.

 

[Lifetime17]

Re: FS: Mech-mod drop in Host - Copper & S/S

Hi J,
Glad to see your using the Delrin machined isolating spacer for the copper sink. Should be a go with the case POS+ diodes, I was wondering when you were going to put the two together.
Good luck with the sale buddy looks great .

Rich

 

[jnrpop]

Re: FS: Mech-mod drop in Host - Copper & S/S

That's nice, Corey. Was any of that part of the package I sent you? I was relieved to see it got to you without issues. Good luck on your sale, buddy.

Indeed so Paul, I've build one into an Isolated adapter for my <505 case positive diode, very happy with it. No need for a second unit so im happy to pass it on :beer:

This is amazing, was looking at mech-mods earlier. Will keep you posted if I commit to the purchase. Good luck with sale.

Thanks Fruits,

Hi J,
Glad to see your using the Delrin machined isolating spacer for the copper sink. Should be a go with the case POS+ diodes, I was wondering when you were going to put the two together.
Good luck with the sale buddy looks great .

Rich

Hi Rich,
The first unit's been built for some time now, the idea worked great for my case+ <505 diode. Very happy with it, and no need to use the blitzbuck, you can use any driver with this isolated adapter, im using an Omni at 220mA. And you get full heatsinking capability, no need to isolate the little 12mm module

I have no need for the second unit, although its such a beautiful copper 510 adapter, built by you so workmanship is 100% :beer:

Thanks Rich!

 

[trinh hong phuoc]

Re: FS: Mech-mod drop in Host - Copper & S/S

:drool::drool::gj::

 

[jnrpop]

Sold pending payment :beer:

 

[BobMc]

That was quick. Congratulations on your sale.

 

[Alaskan]

Damn! That did go quick, hardly giving anyone else a shot at it

 

[Lifetime17]

Hi J, Thats great to hear I use the Delrin material to make different spacers for the builds . Its a little tricky to work with though, but strong enough . Glad it sold fast buddy.

Rich

 

[jnrpop]

Hi J, Thats great to hear I use the Delrin material to make different spacers for the builds . Its a little tricky to work with though, but strong enough . Glad it sold fast buddy.

Rich

I could imagine Rich, its a great material, very strong.
Your an asset to the community rich and an all round great guy, thank YOU for making them :beer:
All the best for that N520 beauty in your sig too :drool:

 

[Lifetime17]

Hi J,
Thank you the N520 S4X sale is still pending , Anyway I am glad this project worked out clean, The Delrin is a strong material I have some PTFE nylon bar but didn't try anything with it yet.
Just made an insert for the crenelated front of the S4X to hold a standard lens came out nice with the coated heat sink. A few pics buddy.
Rich

 

[BowtieGuy]

Congrats on your quick sale, that host is going to make someone a nice finished laser, hope to see it in a build thread soon! :yh:

 

[jnrpop]

Congrats on your quick sale, that host is going to make someone a nice finished laser, hope to see it in a build thread soon! :yh:

Appreciate it Bowtie :beer:

Hi J,
Thank you the N520 S4X sale is still pending , Anyway I am glad this project worked out clean, The Delrin is a strong material I have some PTFE nylon bar but didn't try anything with it yet.
Just made an insert for the crenelated front of the S4X to hold a standard lens came out nice with the coated heat sink. A few pics buddy.
Rich

Rich, looks fantastic!
Hey another idea you could also create custom front plastic inserts for hosts, to fit larger diameter lens barrels for larger optics, instead of the standard M9, with a 6.35 lens, we could start going bigger for the MM diodes

 

[Lifetime17]

Hi J,
Great idea that would be awesome to cut the divergence down on a diode like the 44. The insert I made is machined of AL in the pic .

Rich

 

[jnrpop]

Hi J,
Great idea that would be awesome to cut the divergence down on a diode like the 44. The insert I made is machined of AL in the pic .

Rich

^^^ here we go......... :drool: :beer: