Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

FS: Kryton Groove Polished Violet Laser $80.00...

Joined
Aug 10, 2008
Messages
268
Points
18
i am selling one of my kryton groove lasers. it is polished and has a PHR-803T diode and a groove driver set at 120mA. it uses 2x CR123 (16340) or 1x 18650. this laser burns really nice, and i am letting it go cheap to fund my next laser project a 30K scanner.

:anyone:


I am asking $80.00 for this laser + S&H (usually less than $5.00)


here are the pix...


P1010027.jpg


P1010036.jpg


P1010029.jpg


P1010032.jpg



the heatshrink on the tail switch spring is to isolate the spring from the spacer (separate case from battery GND) and the wire on the groove driver is flying leads to the diode, since the diode is recessed into the head.



:drool:
 





Kenom

0
Joined
May 4, 2007
Messages
5,629
Points
63
This is a steal folks considering the Groove alone is worth $50 and the flex $23. You won't get a better chance to own your very own Kryton Groove!!!
 

Kenom

0
Joined
May 4, 2007
Messages
5,629
Points
63
my bad. Sorry no flex drive. Groove driver. Still a good driver.
 
Joined
Aug 10, 2008
Messages
268
Points
18
ShopElement_PayPal-Logo.jpg


cgreen36352@gmail.com

i have had good luck with the groove drivers (especially under 200mA) stability. pretty flat line on the meter.
i agree it is a good deal, i just want to start my new project.
once pmt is received, i will ship.
 
Joined
Nov 27, 2008
Messages
863
Points
18
Payment sent? Aaah, hell, I PM'd the confirmation I'd take it hours ago, hopefully I managed to get my reservation in first (Sorry, Bob) ...
 
Joined
Dec 4, 2008
Messages
737
Points
18
Wait I sent my payment in as soon as it was posted , then i confirmed i wanted it. .
 
Joined
Aug 10, 2008
Messages
268
Points
18
no sorry guys, Bob_Boyce has won this. he sent his pmt at 4:30 yesterday afternoon and pm me about an hour before. i may sell another kryton in about another week or two, except this one has a v3 flexdrive in it.
 
Joined
Aug 10, 2008
Messages
268
Points
18
you should have the laser today or tomorrow. let me know when it arrives.
 
Joined
Apr 11, 2009
Messages
187
Points
43
Yes it came in on the 1st, thank you. Sorry, I forgot to check back here to let you know. I have not been monitoring this forum nearly as much since the shoutbox was removed. I've been over on laserchat.

Oh, I reset the groove driver to 100mA and it is working fine. If I keep this, I will very likely replace that groove driver with the more efficient drlava FlexDrive V4, and put in a 6X or 8X blu-ray LD. I have been holding off in case someone wants to work out a trade, as I hate to modify rare originals.

Bob
 
Joined
Aug 10, 2008
Messages
268
Points
18
i had the option to use a flexdrive, but i needed it in a smaller host. the groove driver is a pretty stable driver, but you can get more runtime off of 1x 18650 using a flexdrive. other than that there aren't any other benefits. im glad you got the laser quickly. hope you enjoy. if you want the inserts you get the 2mm rubber from here.

artbeads_2055_1078469626
 




Top