Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

FS: Coleman MAX CR2 Kits

Right now there are 2 "scratched" kits left. everything else is sold.
I'm keeping one for myself :D
Now i just need to get a jib driver.
 





are you gonna run these with a 445 at 1.3A with cr2's??? isnt that pushing the batteries a bit much?
 
You can get as much as 1.5A from 2x CR2s in my experience.
 
Hey guys I'll tell you these scrathed hosts dont even look bad in person. I got 1 of them, its hardly noticable. Still looks great to me and at this price its a frickin steal. Jump of these guys!!!
 
hey Mo, how deep are the scratches.?


Edit: Dint see Post above.^
 
Last edited:
Silly question - how do you grab the battery (-) feed in these? The head threads are anodized, and the heatsink isn't picking up the case charge as a result.
 
the top of the host body pinches down againt the heatsink when you screw it down. If you scratch off the top poart of the body so that it's a metal contact when it's screwed down against the heatsink you'll get a connection no problem.
 
Got it (different approach, but it worked)

I just built one of these with a 1.66 A (at least that's what it's wired for) 1085 diy driver. Awesome build. Love it ;)

EDIT: Holy smokes Moh, I got this host to do over 1.5W :) I love this guy! Here's the driver approach I took:

Thermal pad, with IC thermal epoxied in place:
attachment.php


4x Parallel SMD 3 ohm resistors (easiest way to get 3W + in a small package)
attachment.php


And a ton of epoxy at the end, to keep everything in place.
attachment.php


Because of space issues, the protective cap needs to be moved to the diode itself. This is a solder job that requires very quick soldering, and very quick cooling (I like to toss a wet piece of fabric on the diode leads the second I've soldered each side of the cap, so that the bulk volume of solder doesn't retain heat any longer than necessary)
attachment.php


The final product - GETS HOT FAST!
attachment.php


LPMs at over 1,500 mW raw optical output.
lpm-cr2coleman.gif
 

Attachments

  • 2011-04-26 17.34.09.jpg
    2011-04-26 17.34.09.jpg
    106.9 KB · Views: 290
  • 2011-04-26 18.04.54.jpg
    2011-04-26 18.04.54.jpg
    109.1 KB · Views: 274
  • 2011-04-26 18.32.23.jpg
    2011-04-26 18.32.23.jpg
    113.4 KB · Views: 288
  • 2011-04-26 19.07.10.jpg
    2011-04-26 19.07.10.jpg
    106.5 KB · Views: 272
  • 2011-04-26 19.27.00.jpg
    2011-04-26 19.27.00.jpg
    121.8 KB · Views: 474
Last edited:
i thought the pill also has a negative connection point...but i guess you opted to not use the pill...

either way great stuff.

P.S. where did you get the thermal pads from. Beats the heck out of using artic silver for everything everytime, and wasting most of it. i always end up using 1/4th of what gets squeezed out.
 
Actually, there's no pill on these at all.

Scratch that - there is, in a separate bag. I've sort of ignored them. Probably should take another look.
 
Last edited:
ohhh...thats right, i requested Matt to include the pill, the led, and the batteries that came with the host. I figured i was gonna need it so yea...helps with the negative connection so i dont have to mod nothing.
 
No, it's not Moh's fault - he included them for me too, I just ignored them foolishly - though I like my result ;)

I've never had 1.5W in such a small host.
 
hey were these those 110 Lumen flashlights.
If they are how much you want for just the LED.
 
I didn't keep the LED's. They were included with each of the kits.
That's a sweet build RHD. I'll take the getting hot fast as a good sign that the heat is being transferred to the surface for dissipation.
 
You must log in or register to reply here.





Back
Top