Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

FS: Aurora C6 Kits!

Status
Not open for further replies.
Yes but i want to buy a laser and then after i get some money buy your kits. How many kits do you have ?
Any exception please ?
 
Last edited:





I've got 7 of these available so they should last a little while.
 
Last edited:
Look, i am building some lasers for my friends.
I have some C6 hosts but with no pill so it is very hard to mount the driver.
So i am asking you if you have any pills with drivers inside them.
That doesnt mean i am not interested for your kits !

Did i explained everything to you ? Are you still confused ?
 
Each of the kits I sell have pills in them.

I don't have any extras laying around though.
 
Hey i am interested for 3 ''just add a diode kits''. But i have a C6 which has a problem on the tailcap when it is fully screwed it doesnt work. Is this problem fixed ? What are the available mA options ?

I remember something similar happening to a C6 of my own.
IIRC it was because something was loose in the tail cap.
Everything in the tailcap is held into place by a threaded ring. It was an easy fix, but i can't recall the exact problem off the top of my head. I'll check it out again and get back to you.


If the Battery is too tight it puts pressure on the switch. When it puts the pressure on the switch its pushes the tabs or metal whatever that makes contact with the host away and breaks the connection.

Thats why i found to be the problem.

But i only see this issue with 18350.
 
Any idea whether these heatsinks will fit other hosts? I know they're tapered.
 
"I might do away with the "basic kit" and only sell them as the just add diode kits and use a fixed current, like 1.6A for all of them."
Is this what I need?

Hey Moh,
I want to build my first 445 at 1.5 or above.

Is it possible with your C6 kit, guessing I will need your 1.6 or 1.8 driver?
I could use this diode.
DTR's Laser Shop - 1.5W-2W A140 diodes
What batteries do you recommend?
Thanks
 
"I might do away with the "basic kit" and only sell them as the just add diode kits and use a fixed current, like 1.6A for all of them."
Is this what I need?

Hey Moh,
I want to build my first 445 at 1.5 or above.

Is it possible with your C6 kit, guessing I will need your 1.6 or 1.8 driver?
I could use this diode.
DTR's Laser Shop - 1.5W-2W A140 diodes
What batteries do you recommend?
Thanks

you'll want two IMR CR123 lithium batteries.
 
i'm doing clinicals in the ER right now. I get off at midnight CST and will answer pms when I get home.
I'm stuck stabbing people with needles and making babies cry for the next 4 hours though :crackup:
 
Status
Not open for further replies.





Back
Top