Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Diy laser. Please help






I don't know, look for it.
Why do you want a two? Just buy two of those and connect them in series.
 
artix said:
right.... lol  ;D

For the heat sink, will a small plate one work? tell me which one  ;D Thanks!!!
Click to expand...
No, you need an actual chunk. You could use a CPU heatsink. Are you putting it in a box or a flashlight? If in a box, you could find a small CPU heatsink and drill a hole through it for the module.

Cheers
 
Yes, tell us what kind of host you're going to use.
For a heatsink you could also get a whole bunch of washers drilled at the proper size so that you can fit your aixiz module in them and then glue them together using thermal epoxy. It may not be a perfect heatsink but it's better than nothing. :P There are lots of ways to make heatsinks.
Use your imagination. ;D
 
Spyderz20x6 said:
[quote author=artix link=1213219369/12#19 date=1213317685]right.... lol  ;D

For the heat sink, will a small plate one work? tell me which one  ;D Thanks!!!
Click to expand...
No, you need an actual chunk. You could use a CPU heatsink. Are you putting it in a box or a flashlight? If in a box, you could find a small CPU heatsink and drill a hole through it for the module.

Cheers[/quote]

Its a box style! and I found one this is $2.00 link and looks cube-ish there is a second one but it costs more
 
artix said:
[quote author=Spyderz20x6 link=1213219369/12#21 date=1213329946][quote author=artix link=1213219369/12#19 date=1213317685]right.... lol  ;D

For the heat sink, will a small plate one work? tell me which one  ;D Thanks!!!
Click to expand...
No, you need an actual chunk. You could use a CPU heatsink. Are you putting it in a box or a flashlight? If in a box, you could find a small CPU heatsink and drill a hole through it for the module.

Cheers[/quote]

Its a box style! and I found one this is $2.00 link and looks cube-ish there is a second one but it costs more[/quote]
Try finding a smaller one. How big is the box?
 
artix said:
[quote author=Spyderz20x6 link=1213219369/24#26 date=1213407432][quote author=artix link=1213219369/24#25 date=1213395321]this big

1+3+3=7 <---tiny heat sink! lol
Click to expand...
That project box is 8 inches in length!?! :o[/quote]

is that too big? there are other ones...[/quote]
Thats pretty big... unless you are doing some serious circuitry.
5 inches is more than enough.
 
This one uses the heatsink from a DX labbie red, LM317and 2 X RCR123A batteries.
All in a case 4.5" L X 2.5" W X 1.25 H, so yes you can go much smaller.

Regards rog8811
 

Attachments

  • NIR03.jpg
    NIR03.jpg
    215.1 KB · Views: 83
rog8811 said:
This one uses the heatsink from a DX labbie red, LM317and 2 X RCR123A batteries.
All in a case 4.5" L X 2.5" W X 1.25 H, so yes you can go much smaller.

Regards rog8811
Click to expand...
Very nicely built, Rog ;)
Puts all my lasers to shame... :-[
 
@ Spyderz20x6, It also uses one of the sharp near IR LD's that you were posting about some time ago, did you ever do anything with them?

Sorry for slight thread-jack Artix.........you can have it back in a mo..... :)

Regards rog8811
 
You must log in or register to reply here.





Back
Top