Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

DieselMarines blu ray question

dieselmarine

dieselmarine

0
Joined
Aug 6, 2009
Messages
476
Points
0
WHATS UP , I AM NEW TO THE WHOLE LASER THING ALTHOUGH WE USE LASERS IN THE MARINES THEY ARE AT MOST 30-40 mW i just have a question i bought one of the 200mW red lasers from budget gadgets the focusable one and swapted the 200mW red diode with a LG blu ray dvd writer diode has anyone on this site done that before???

And can someone please tell me what kind of diode is in one of these LG blu ray dvd burners what are the specs are like the mW's and anything else i should know!!! thanks so much

semper fidelis
SGT. Victor Staros
 
Last edited:





Its a LG super multi blue the model # cho8ls10
and the speed is 16x DVD 8x BD does that help ???
thanx for the replys

Semper Fidelis
SGT. Victor Staros
United States Marine Corps
 
That is a bluray (BD) reader (DVD & CD burner). We mostly work with bluray burners. They are much higher powered. I'm not sure if anyone has tested the diode out of that reader.

Is it actually lasing with the driver from the 200mW red?

Peace,
dave
 
All those caps make it sounds aggresive.


If you were about to change diode of the ''Dilda'' why didin't you pick the 100mW that cost 1/2 of it?, also you will need to replace the driver.
 
rangedunits said:
All those caps make it sounds aggresive.
If you were about to change diode of the ''Dilda'' why didin't you pick the 100mW that cost 1/2 of it?, also you will need to replace the driver.
Click to expand...

His post implies that he already did it. That's why I asked if it was actually lasing. The current for the 200mW red should have burned out the violet diode (or it will very soon).

Peace,
dave
 
daguin said:
That is a bluray (BD) reader (DVD & CD burner). We mostly work with bluray burners. They are much higher powered. I'm not sure if anyone has tested the diode out of that reader.

Is it actually lasing with the driver from the 200mW red?

Peace,
dave
Click to expand...

Where can I get the higher power diode from?
 
I think the highest powered BR burner is still acquired by harvesting an 8X DVD BR BURNER. As I recall, the Pioneer 203 is most common. You can run that diode at about 360 mA.

Mike
 
Sometime months ago I did just an experiment with a single lm317, a cap and some resistors for a driver, and a PHR803T. At that time I had no rkcstr nor any other driver. But at 120mA works great, I have no LPM but It stinks my hand from 10 meters and pops balloons also. Single dilda mod but one of my favourites. I have thought to make one with a 6x or 8x diode, but dildas have a very bad heat dissipation you know, and that's for what I haven't done it with such kind of powered diodes.
 
You must log in or register to reply here.


Back
Top