Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Compact 1.6W Hotlights 22600/18500 Host W/Driver Heatsink Mod

Re: Compact 1.6W Hotlights 18500 Host W/Driver Heatsink Mod

Added current draw from the battery when running at 1.5A.

2Amp Draw

p1012287.jpg
 
Last edited:





Re: Compact 1.6W Hotlights 18500 Host W/Driver Heatsink Mod

Thanks adding to google notebook for future references :)
 
Re: Compact 1.6W Hotlights 18500 Host W/Driver Heatsink Mod

Damn, that's a beauty.

How'd you get the coin idea? I've never seen that before...friggin' genius.:bowdown: So now that the coin contacts the host you basically turned the whole thing into the heatsink?

Also, since lasers perform poorer as they heat up would chilling the entire thing in the freezer make it laze better? The only thing I'd be concerned about would be condensation...but if you water-proof it with some O-rings that shouldn't be a problem, right?
 
Re: Compact 1.6W Hotlights 18500 Host W/Driver Heatsink Mod

whats the adhesive you use? and where can i get it?

Cheers
 
Re: Compact 1.6W Hotlights 18500 Host W/Driver Heatsink Mod

Also, since lasers perform poorer as they heat up would chilling the entire thing in the freezer make it laze better? The only thing I'd be concerned about would be condensation...but if you water-proof it with some O-rings that shouldn't be a problem, right?

I would be afraid of condensation on the inside of the diode window where it could not be cleaned off. I think it is supposed to have some kind of gas inside the diode can but cant remember what.

whats the adhesive you use? and where can i get it?

Cheers

Yes the Arctic Silver. I have been ordering from here. Ships quick.
ARCTIC SILVER THERMAL ADHESIVE TWO-PART ADHESIVE - eBay (item 360306077416 end time Oct-31-10 07:37:57 PDT)
 
Re: Compact 1.6W Hotlights 18500 Host W/Driver Heatsink Mod

I would be afraid of condensation on the inside of the diode window where it could not be cleaned off. I think it is supposed to have some kind of gas inside the diode can but cant remember what.

Ah yes, I forgot about that...I think I'll keep my lasers out of the icebox :crackup:
 
Re: Compact 1.6W Hotlights 18500 Host W/Driver Heatsink Mod

Does anybody know if an what kind of gas is in the diode can. I thought I remembered reading that somewhere but can't find it.
 
Re: Compact 1.6W Hotlights 18500 Host W/Driver Heatsink Mod

I've got 50 more on the way. Prob be available in 1-2 weeks. I'm going to do another run of the guidesman hosts too. Probably around 20 of them.
 
Re: Compact 1.6W Hotlights 18500 Host W/Driver Heatsink Mod

I've got 50 more on the way. Prob be available in 1-2 weeks. I'm going to do another run of the guidesman hosts too. Probably around 20 of them.

Good to hear. They are both great hosts.:beer:
 
Re: Compact 1.6W Hotlights 18500 Host W/Driver Heatsink Mod

Thanks for the links to the thermal adhesive.

Ive allways wondered what to use....spose a quick google of "thermal adhesive" would have helped :) .

@ DTR no problems running @1.5A ?

EDIT

Forgot to ask, has anyone had any problems the the electrical conductivity of the thermal adhesive? i notice on the website it's slightly capacitive, and should be "kept away" from close running tracks, indicating it may be conductive?
 
Last edited:
Re: Compact 1.6W Hotlights 18500 Host W/Driver Heatsink Mod

Thanks for the links to the thermal adhesive.

Ive allways wondered what to use....spose a quick google of "thermal adhesive" would have helped :) .

@ DTR no problems running @1.5A ?

I know I'm not DTR but my coin mod has shown no problems! In fact I've never had a burning laser last as long as it has. It's beyond amazing
 
  • Like
Reactions: ped
Re: Compact 1.6W Hotlights 18500 Host W/Driver Heatsink Mod

I know I'm not DTR but my coin mod has shown no problems! In fact I've never had a burning laser last as long as it has. It's beyond amazing

Ok youve sold me :)

I'll either use your idea on my next build, or dremel out a bit of the host and mount it there.

Cheers CJ
 
Re: Compact 1.6W Hotlights 18500 Host W/Driver Heatsink Mod

Ok youve sold me :)

I'll either use your idea on my next build, or dremel out a bit of the host and mount it there.

Cheers CJ

When I had the first quarter in my hands It got so scolding hot within a few seconds from the drill I let it go and it went flying. Glad I had 50 cents hahaha
 
Last edited:
Re: Compact 1.6W Hotlights 18500 Host W/Driver Heatsink Mod

These hosts are pretty nice, I'm surprised you were able to push so much power into it without it heating up too much.

These hosts are also for sale at radiant electronics if anyone wants one :) Moh just had a pile of them and wanted to get rid of em fast so I grabbed a couple to sell over time.
 
Re: Compact 1.6W Hotlights 18500 Host W/Driver Heatsink Mod

Even tho they are small they have massive heatsinks and the body's dissapate heat really well to.:beer:
 
Last edited:





Back
Top