drlava
0
- Joined
- Mar 7, 2007
- Messages
- 1,152
- Points
- 0
As promised, Here are some photos of the freshly completed leadlight modded into a blue abomination.
It's powered by 2 AAAs using a Micro FlexDrive and the leadlight board for OEM switch and LED operation.
Unfortunately I wont be keeping this one, it's already been claimed by another member :-[ enjoy!
Same circuit layout as the red:
A few details:
-Because of the diode layout, batteries have to be inserted + in.
-Because the batteries have to be reversed, the LED has to be de-soldered and reversed
-The aperture has to be enlarged slightly to make room for the fatter beam
-Side-switch blue presentation pointers are very awesome.
However this time driving a PS3 blue to 15mW:
incense was used to bring out the beam
It's powered by 2 AAAs using a Micro FlexDrive and the leadlight board for OEM switch and LED operation.
Unfortunately I wont be keeping this one, it's already been claimed by another member :-[ enjoy!
Same circuit layout as the red:
A few details:
-Because of the diode layout, batteries have to be inserted + in.
-Because the batteries have to be reversed, the LED has to be de-soldered and reversed
-The aperture has to be enlarged slightly to make room for the fatter beam
-Side-switch blue presentation pointers are very awesome.
However this time driving a PS3 blue to 15mW:
incense was used to bring out the beam