Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



Anyone interested in building me a 445nm in this host?




HIMNL9

New member
Joined
May 26, 2009
Messages
5,416
Points
0
Do you already have one of them, for know if the body is aluminium or plastic ?

If is made in plastic, you will have a very low duty cycle, or need to build some sort of heatsinking add-on in the gun body .....
 

HIMNL9

New member
Joined
May 26, 2009
Messages
5,416
Points
0
Metallized plastic, probably ..... and with a completely closed frame .....

Looking at it, seem that there is a bit of space inside, for add some heatsinking parts, but not too much ..... and the fact that the frame is completely closed, also, give some more problems (making holes in metallized plastic usually ends in a mess) ..... also, you have probably to change both the main and trigger switch, for these currents .....

Not impossible, but not a 5-minutes-work, for sure .....
 

DJNY

Well-known member
Joined
Nov 2, 2009
Messages
5,992
Points
83
Better in Jayrob´s phaser

Anyone able to do this, or do I have to wait for the perfect optics for the 445nm diode?


HIMNL9 I just saw your laser gun built, also a nice one :wave:
 
Last edited:

HIMNL9

New member
Joined
May 26, 2009
Messages
5,416
Points
0
HIMNL9 I just saw your laser gun built, also a nice one :wave:
Sorry, what one ? :confused:

I'm trying to modify a sci-fi prop (not a Star Trek phaser :p), but the work is at half, and i never posted any pic about it, or at least i don't remember to have never posted one ..... are you sure you are not confusing me with some other ?
 

scopeguy20

Well-known member
Joined
Jun 28, 2007
Messages
3,447
Points
63
I will make a ray-gun design, but I will not likely offer it F.S. complete, maybe as a kit though... ;) -Glenn
 

jayrob

Well-known member
LPF Site Supporter
Joined
Sep 21, 2007
Messages
9,874
Points
113
Better in Jayrob´s phaser

Anyone able to do this, or do I have to wait for the perfect optics for the 445nm diode?


HIMNL9 I just saw your laser gun built, also a nice one :wave:
It is perfect for my Phaser mod...

The AixiZ 405 glass lens gives a plenty nice beam...

But the lens must be a full length threaded one to be able to fit my Phaser EzFocus tip. Many of the AixiZ 405 glass lenses come with only half threaded lens nuts.

But AixiZ can get you them in the full length threaded nuts. You just have to ask and specify when you order...
 

Nanolaser

New member
Joined
Feb 4, 2010
Messages
548
Points
0
I did some research on phaser hosts in the past and i just found the ideal host a few weeks ago,... I will post some pictures soon. :wave:
 
Last edited:

Mr Despair

New member
Joined
Dec 16, 2009
Messages
43
Points
0
I wonder how long it will be before someone makes a 445 in a sonic screwdriver host! :drool:
 




Top